Mocka Jack Entertainment Unit User manual

Jack Entertainment Unit
Assembly Instructions
Thank you for your purchase.
Please follow the instructions below for correct assembly.
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
1
Phillips & Flathead screwdrivers required.
For quicker assembly, we recommend the
use of a power drill on a low-speed setting.
bolt
x12
wedge
x8
screw
x8
screw
x8
AB C DEFG
HJ K LM
I
Hardware Supplied
dowel
x20
screw
x16
slide
rail x1
slide
rail x1
slide
rail x1
slide
rail x1
locking
nut x12
cam bolt
x8
handle
x3
N
allen key
x1
O P
bolt
x4
locking
nut x4
small small
WARNING: Any furniture that is not anchored to a wall has the
circumstances, i.e. if a child attempts
Accordingly,
with all furniture sold and we recommend these are used
provided should fit most
devices from those supplied.
all furniture is anchored to a wall. We supply a free
but please note that different wall materials may require different
potential to tip over in certain
to climb up on the furniture or in the event of an earthquake.
we recommend that
safety wall anchor
to prevent yourproduct tipping. The fixing device
wall types,
fixing
QR
hinge screw
x4 x24
long
screw x10
T U
screw
x4
Wall Strap
x2
washer
Z
Y
wall
anchor
x1
X
safety
strap x1
WV
screw
x1
wall
screw
x1

Jack Entertainment Unit
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
2
12
Insert 8x bolts (C) into panel [1]. Tighten with a screwdriver. Attach 1x slide rail (F) to panel [3] and secure with 3x screws (E).
Attach 1x slide rail (G) to panel [4] and secure with 3x screws (E).
Insert 4x bolts (C) to the panels [3] and [4]. Tighten with a screwdriver.
C
C
C
C
1
E
G
CR
E
F
CL
3
C
4
C
C
C
C
C
C
C
E
E
E
E
E
E
F
G

Jack Entertainment Unit
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
3
34
Attach panel [5] to panels [3] and [4] with 4x dowels (A), and secure
with 4x locking nuts (D) and tighten with a screwdriver.
Attach panels [6], [7], [3] and [4] to top panel [1] with 8x dowels (A) .
Secure with 8x locking nuts (D) and tighten with a screwdriver.
3
4
6
4
3
A
D
D
D
5
7
A
A
D
A
D
AA
AA
D
D
D
AA
D
D
AA
D
1

Jack Entertainment Unit
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
4
56
Between panels [6], [3], [4] and [7] to form the back of the unit Attach bottom panel [2] to the rest of the unit using 8x dowels (A).
Secure with 8x screws (B) and tighten with a screwdriver.
8
8
9
B
B
A
A
B
B
A
B
B
A
B
B
A
2
6
7
B
6
4
3
7

Jack Entertainment Unit
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
5
78
Attach panels [11] to the panels [10] with 8x cam bolts (J) and tighten
with an Allen key (N).
Attach leg panels to the bottom panel [2] with 10x screws (T), and
tighten with a screwdriver.
J
J
JN
J
T
T
T
T
T
T
T
T
T
T
T
10
10
11
11
2
10
11
JN

Jack Entertainment Unit
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
6
910
Attach 4x hinges (Q) to door panels [12] and [13], securing with 8x
screws (R). Attach 2x handles (M) to door panels [12] and [13] and
secure with 4x screws (H). Tighten with a screwdriver.
Secure door panels [12] and [13] to the main unit by attaching the other end
of the hinges (Q) with 16x screws (R) as shown. Tighten with a screwdriver.
Q
RRQ
RR
Q
RRQ
RR
EE
EE
M
M
12
13
R
R
R
12
13
Q
RR
NOTE: If the doors are uneven or
there is a gap in the middle, loosen
or tighten the screw on the door
hinge until they are sitting flush.

Jack Entertainment Unit
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
7
11 12
Insert 4x small bolt (O) into panel [14]. Tighten with a screwdriver. Attach panels [15] and [16] to panel [14] with 4x small locking nuts (P).
Tighten with a screwdriver.
P
P
O
O
O
O
P
P
14
14
15
16

Jack Entertainment Unit
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
8
13 14
Slide panel [17] along the grooves between the side panels [15]
and [16] to form the base of the drawer.
Attach panels [15], [16] and [18] with 4x screws (U).
Tighten with a screwdriver.
15
16
17
16
15
18
U
U
U
U

Jack Entertainment Unit
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
9
15 16
Attach handle (M) to panel [14] with 2x screws (E).Tighten with a screwdriver.
Attach slide rails (I) and (H) to panels [16] and [15] with 4x small screws (E).
Tighten with a screwdriver.
E
E
E
E
H
I
16
15
E
E
M
14

Jack Entertainment Unit
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
10
17 18
Attach 8x wedges (K) to the corners of the back panels [8] as shown,
and secure with 8x small screws (L).Attach 1x safety strap (V) to the
top panel [1] of the back side of the unit as shown using 1x washer (Z)
and 1x screw (W). Tighten with a screwdriver.
Insert the completed drawer into the main unit as shown, ensuring
they slide easily along the rails.
K
L
K
L
K
L
K
K
K
L
K
K
L
K
14
8
8
9
V
Z
W
V
Z
W
1