Mocka Nava Coffee Table User manual

Nava Coffee Table
Assembly Instructions
Thank you for your purchase.
Please follow the instructions below for correct assembly.
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
1
bolt
x6
long
screw
x18
AB C D
F G
E
Hardware Supplied
dowel
x16
locking
nut x6
screw
x16
x4
washer
H
bolt
x4
Cover
x6
I
WARNING: Any furniture that is not anchored to a wall has the potential to
tip over in certain circumstances, i.e. if a child attempts to climb up on the
furniture or in the event of an earthquake. Accordingly, we recommend that
all furniture is anchored to a wall. We supply a free safety wall anchor with
all furniture sold and we recommend these are used to prevent your product
tipping. The fixing device provided should fit most wall types, but please
note that different wall materials may require different fixing devices from
those supplied.
J
key x1
Allen
long
dowel
x2
For quicker assembly, we recommend the
use of a power drill on a low-speed setting.
Phillips & Flathead screwdrivers
and hammer required
plastic
glide x4
K

Nava Coffee Table
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
2
12
Insert 6x bolts (C) into panel [1], and tighten with a screwdriver. Attach panels [4] and [5] to panel [6] with 2x dowels (A) and 2x long dowels (I).
C
C
C
C
1
C
C
A
I
I
4
5
6

Nava Coffee Table
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
3
34
Attach panels [3] and [5] to panel [6] with 2x dowel (A) and using the
other end of the 2x long dowel (I) already inserted into panel [5].
Attach panel [1] to the unit with 6x dowels (A), and secure with 6x locking
nuts (D). Tighten with a screwdriver. Attach 6x covers (H) to the holes
of panels [3], [4] and [5] as shown.
A
A
5
6
3
3
4
5
A
D
H
D
H
A
DH
A
DH
A
D

Nava Coffee Table
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
4
56
Attach panel [2] to the unit with 6x dowels (A) and secure with 6x
long screws (B). Tighten with a screwdriver.
Attach panels [9] to panels [7] and [8] with 16x screws (E).
Tighten with a screwdriver.
B
A
A
A
A
A
B
B
B
B
B
B
4
5
6
6
2
3
E
E
E
E
E
9
7
8

Nava Coffee Table
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
5
78
Attach panels [7] and [8] to panel [2] and secure with 12x long screws (B).
Tighten with a screwdriver.
Attach Legs [10] to panels [9] with 4x washers (G) and 4x bolts (F).
Tighten with the the Allen key (J). Attach 4x plastic glides (K) to the
legs using a hammer as shown. Once assembled lift furniture into
place, do not drag. You’re done, enjoy!
2
F
G
F
G
9
10
B
B
B
B
B
B
B
B
B
B
B
B
87
J
K
K
K
K
K