Mocka Porto User manual

A B C D E
Phillips screwdriver required
Hardware Supplied
30mm
screw x12
50mm
screw x12
wall plug
x2
25mm
screw x2
safety
strap x2
WARNING: Any furniture that is not anchored to a wall has the potential to tip over
in certain circumstances, i.e. if a child attempts to climb up on the furniture or in the
event of an earthquake. Accordingly, we recommend that all furniture is anchored
to a wall. We supply a free safety wall anchor with all furniture sold and we
recommend these are used to prevent your product tipping. The fixing device
provided should fit most wall types, but please note that different wall materials
may require different fixing devices from those supplied.
Porto Three Shelves
1
mocka.co.nz | mocka.com.au
Assembly Instructions
Thank you for your purchase.
Please follow the instructions below for correct assembly.

12
Attach panel [2] to the side panels with 4x 30mm screws (A) and 4x
50mm screws (B). Tighten with a screwdriver.
Attach panel [1] with 4x 30mm screws (A) and 4x 50mm screws (B) as
shown. Tighten with a screwdriver.
B
A
B
A
2
A
B
A
B
B
B
A
A
1
A
B
A
B
Porto Three Shelves
2
mocka.co.nz | mocka.com.au
Assembly Instructions

12
Attach panel [2] to the side panels with 4x 30mm screws (A) and 4x
50mm screws (B). Tighten with a screwdriver.
Attach panel [1] with 4x 30mm screws (A) and 4x 50mm screws (B) as
shown. Tighten with a screwdriver.
B
A
B
A
2
A
B
A
B
B
B
A
A
1
A
B
A
B
34
Attach panel [3] and secure with 4x 30mm screws (A). Secure with 4x
50mm screws (B) also, while attaching the 2x safety straps (E) as
shown. Tighten with a screwdriver. Once assembled lift furniture into
place, do not drag.
Move the unit to the desired location against a wall. Attach the other end
of the 2x safety straps (E) to the wall using 2x wall plugs (D) and 2x
25mm screws (C). Tighten with a screwdriver. You’re done, enjoy!
3
B
B
A
A
A
B
B
EB
E
A
B
C
D
E
Porto Three Shelves
3
mocka.co.nz | mocka.com.au
Assembly Instructions