Mocka Jordi Drawers User manual

A B C E
FGI
Hardware Supplied
dowel
x8
bolt
x20
locking
nut x20 screw
x12
*We recommend using a Flathead screwdriver to tighten all locking nuts 100% before first use.
Please clear any loose wood from the locking nut holes before inserting the nut to ensure it locks 100%.
wheel
x2
wheel
x2 slide
rail x6
slide
rail x6
H
D
screw
x40
Phillips & Flathead screwdrivers required
Jordi Drawers
1
mocka.co.nz | mocka.com.au
Assembly Instructions
Thank you for your purchase.
Please follow the instructions below for correct assembly.

12
Insert 4x bolts (A) into panel [1]. Attach 4x wheels (F) and (G) to the
underside of panel [2] with 16x screws (D) as shown. Tighten with a
screwdriver. Now attach 4x bolts into the top of panel [2].
Attach 4x slide rails (H) to panels [3] and [4] and secure with 8x screws
(D) as shown. Tighten with a screwdriver.
1
2
A
A
A
A
A
A
A
A
G
DF
D
F
D
34
DD
D
D
D
D
H
H
H
D
D
H
D
D
H
Jordi Drawers
2
mocka.co.nz | mocka.com.au
Assembly Instructions

34
Insert 4x dowels into panel [2] and attach panels [3] and [4] as shown.
Secure with 4x locking nuts (B) and tighten with a screwdriver. Slide
panel [5] between panels [3] and [4] to create the back of the unit.
Attach the final 2x slide rails (H) to the bottom of panels [3] and [4] and
secure with 4x screws (D) as shown. Tighten with a screwdriver.
3
4
CB
B
BC
C
C
5
2
B
B
D
D
H
3
4
H
Jordi Drawers
3
mocka.co.nz | mocka.com.au
Assembly Instructions

56
Insert 4x dowels (C) into the ends of panels [3] and [4] and attach the top
panel [1]. Secure with 4x locking nuts (B) and tighten with a screwdriver.
Insert 4x bolts (A) into panel [14]. Attach side panels [11] and [12] and secure
with 4x locking nuts (B). Slide panel [9] between the side panels to form the
base. Attach back panel [13] with 4x small screws (E). Attach 2x slide rails (I)
to the sides and secure with 4x screws (D). Tighten all with screwdriver.
9
Drawers x2
B
A
A
A
B
B
B
E
E
E
I
I
D
14
13
11
12
CC
C
CB
B
BB
1
Jordi Drawers
Assembly Instructions
4
mocka.co.nz | mocka.com.au

Jolt Wardrobe
ASSEMBLY INSTRUCTIONS
5
mocka.co.nz | mocka.com.au
56
Insert 4x dowels (C) into the ends of panels [3] and [4] and attach the top
panel [1]. Secure with 4x locking nuts (B) and tighten with a screwdriver.
Insert 4x bolts (A) into panel [14]. Attach side panels [11] and [12] and secure
with 4x locking nuts (B). Slide panel [9] between the side panels to form the
base. Attach back panel [13] with 4x small screws (E). Attach 2x slide rails (I)
to the sides and secure with 4x screws (D). Tighten all with screwdriver.
9
Drawers x2
B
A
A
A
B
B
B
E
E
E
I
I
D
14
13
11
12
CC
C
CB
B
BB
1
78
Insert 4x bolts (A) into panel [8]. Attach side panels [6] and [7] and secure
with 4x locking nuts (B). Slide panel [9] between the side panels to form the
base. Attach back panel [10] with 4x small screws (E). Attach 2x slide rails
(I) to the sides and secure with 4x screws (D). Tighten all with screwdriver.
Insert the completed drawers into the unit, ensuring they slide easily
along the rails. You’re done, enjoy!
`
6
7
8
9
10
Drawers x1
B
A
A
A
B
B
B
E
E
E
I
I
D
D
8
14
14
Jordi Drawers
Assembly Instructions
5
mocka.co.nz | mocka.com.au