Mocka Marlow Entertainment Unit User manual

*We recommend using a Flathead screwdriver to tighten all locking nuts 100% before first use.
Please clear any loose wood from the locking nut holes before inserting the nut to ensure it locks 100%.
A B CDEF G H
J
I
Hardware Supplied
dowel
x20
screw
x26
bolt
x28
locking
nut x28 small
screw x30
L + R slide
rail x6
large
screw x8
nut
x4
long
screw x4
safety
strap x2
L M N
washer
x2
wall
plug x2
wedge
x4
K
r/washer
screw x2
OP
small
screw x4
WARNING: Any furniture that is not anchored to a wall has the potential
to tip over in certain circumstances, i.e. if a child attempts to climb up on
the furniture or in the event of an earthquake. Accordingly, we recommend
that all furniture is anchored to a wall. We supply a free safety wall anchor
with all furniture sold and we recommend these are used to prevent your
product tipping. The fixing device provided should fit most wall types, but
please note that different wall materials may require different fixing
devices from those supplied.
Phillips & Flathead screwdrivers required
Marlow Entertainment Unit
1
mocka.co.nz | mocka.com.au
Assembly Instructions
Thank you for your purchase.
Please follow the instructions below for correct assembly.

12
G
Attach 1x slide rails (I) to one side of panels [7] and [9] and secure with
6x small screws (G). Flip each panel over. Attach 1x slide rails (H) to
the other side of panels [7] and [9] and secure with 6x small screws (G).
Tighten with a screwdriver.
Insert 2x bolts (A) and attach 1x slide rail (H) to panel [2] and secure with
3x small screws (G). Insert 2x bolts (A) and attach 1x slide rail (I) to panel
[3] and secure with 3x small screws (G). Tighten with a screwdriver.
9
7
9
7
G
G
GG
G
G
H
I
G
G
G
I
G
G
G
H
3
2
A
A
A
A
G
G
G
G
G
G
I
H
Marlow Entertainment Unit
2
mocka.co.nz | mocka.com.au
Assembly Instructions

12
G
Attach 1x slide rails (I) to one side of panels [7] and [9] and secure with
6x small screws (G). Flip each panel over. Attach 1x slide rails (H) to
the other side of panels [7] and [9] and secure with 6x small screws (G).
Tighten with a screwdriver.
Insert 2x bolts (A) and attach 1x slide rail (H) to panel [2] and secure with
3x small screws (G). Insert 2x bolts (A) and attach 1x slide rail (I) to panel
[3] and secure with 3x small screws (G). Tighten with a screwdriver.
9
7
9
7
G
G
GG
G
G
H
I
G
G
G
I
G
G
G
H
3
2
A
A
A
A
G
G
G
G
G
G
I
H
34
Attach panel [6] and [8] to panel [5] with 4x dowels (F) and secure with
4x screws (D). Tighten with a screwdriver.
Attach panel [7] and [9] to panel [5] with 4x dowels (F) and 4x bolts (A)
and secure with 4x locking nuts (B). Tighten with a screwdriver.
9
8
7
6
5
D
D
D
D
F
F
F
F
A
A
A
A
B
B
B
B
5
B
F
F
F
F
Marlow Entertainment Unit
3
mocka.co.nz | mocka.com.au
Assembly Instructions

56
Attach panel [2] and [3] to panel [5] as shown with 4x dowels (F), and
secure the bolts with 4x locking nuts (B). Tighten with a screwdriver.
Insert 8x dowels (F) into the tops of panels [2], [3], [7] and [9]. Attach
panel [10] and secure with 8x screws (D). Tighten with a screwdriver.
10
5
3
2
B
B
B
B8
6
3
2
D
D
D
D
D
D
DD
F
F
F
F
FF
F
F
F
F
F
F
9
7
Marlow Entertainment Unit
Assembly Instructions
4
mocka.co.nz | mocka.com.au

Jolt Wardrobe
ASSEMBLY INSTRUCTIONS
5
mocka.co.nz | mocka.com.au
56
Attach panel [2] and [3] to panel [5] as shown with 4x dowels (F), and
secure the bolts with 4x locking nuts (B). Tighten with a screwdriver.
Insert 8x dowels (F) into the tops of panels [2], [3], [7] and [9]. Attach
panel [10] and secure with 8x screws (D). Tighten with a screwdriver.
10
5
3
2
B
B
B
B8
6
3
2
D
D
D
D
D
D
DD
F
F
F
F
FF
F
F
F
F
F
F
9
7
78
Assemble the legs by attaching panels [11] and [12] together with 4x
long screws (J) and 4x nuts (C). Tighten with a screwdriver.
Attach the leg panels to panel [10] and secure with 8x large screws (E).
Tighten with a screwdriver. Insert [19] and tighten as shown.
12 11
12
11
C
J
J
C
J
J
E
E
EE
E
E
E
E10
19
C
Marlow Entertainment Unit
Assembly Instructions
5
mocka.co.nz | mocka.com.au

910
Attach slide rails (H) and (I) to panels [14] and [15], and secure with 4x small
screws (G). Insert 4x bolts (A) into panel [13]/[18]. Attach panels [14], [15] and
[16] together with 4x screws (D). Slide panel [17] between the side panels and
attach panel [13]/[18] with 4x locking nuts (B). Tighten with a screwdriver.
Slide panel [4] down between the grooves of panel [2] and [3]. Insert 8x
bolts (A) into panel [1]. Attach the tops of panels [2], [3], [6] and [8], and
secure with 8x locking nuts (B). Tighten with a screwdriver.
15
Drawers x3
14 13
14
15
16
17
18
13 18
D
D
D
D
G
H
GG
G
A
AI
B
B
8
6
3
2
1
4
A
A
AA
A
A
A
A
B
B
B
B
B
B
B
B
A
A
B
B
Marlow Entertainment Unit
Assembly Instructions
6
mocka.co.nz | mocka.com.au

910
Attach slide rails (H) and (I) to panels [14] and [15], and secure with 4x small
screws (G). Insert 4x bolts (A) into panel [13]/[18]. Attach panels [14], [15] and
[16] together with 4x screws (D). Slide panel [17] between the side panels and
attach panel [13]/[18] with 4x locking nuts (B). Tighten with a screwdriver.
Slide panel [4] down between the grooves of panel [2] and [3]. Insert 8x
bolts (A) into panel [1]. Attach the tops of panels [2], [3], [6] and [8], and
secure with 8x locking nuts (B). Tighten with a screwdriver.
15
Drawers x3
14 13
14
15
16
17
18
13 18
D
D
D
D
G
H
GG
G
A
AI
B
B
8
6
3
2
1
4
A
A
AA
A
A
A
A
B
B
B
B
B
B
B
B
A
A
B
B
11
12
Attach 4x wedges (P) to the corners of panel [4] as shown, and secure
with 4x small screws (G). Tighten with a screwdriver.
Insert the completed drawers into the unit.
13
18
18
O
P
P
4
O
O
P
P
O
Marlow Entertainment Unit
Assembly Instructions
7
mocka.co.nz | mocka.com.au

13 14
You’re done, enjoy!Once assembled lift furniture into place, do not drag. Secure the bottom
of the 2x straps (M) to the cabinet with 2x r/washer screws (K). Attach the
top end of the straps (M) to the wall using 2x wall plugs (L), 2x washers (N)
and 2x screws (D). Tighten with a screwdriver.
Wall Strap
D
L
M
N
K
D
L
M
N
K
Product Name
Assembly Instructions
8
mocka.co.nz | mocka.com.au