Mocka Chelsea Bedside Table User manual

A B C D E F G H
JI
Hardware Supplied
bolt
x8
locking
nut x8
small
screw x10
screw
x4
plastic
glide x4
*We recommend using a Flathead screwdriver to tighten all locking nuts 100% before first use.
Please clear any loose wood from the locking nut holes before inserting the nut to ensure it locks 100%.
nut
x4
WARNING: Any furniture that is not anchored to a wall
has the potential to tip over in certain circumstances, i.e.
if a child attempts to climb up on the furniture or in the
event of an earthquake. Accordingly, we recommend
that all furniture is anchored to a wall. We supply a free
safety wall anchor with all furniture sold and we
recommend these are used to prevent your product
tipping. The fixing device provided should fit most wall
types, but please note that different wall materials may
require different fixing devices from those supplied.
dowel
x16
bolt
x4
washer
x2
V W
X Y
screw
x1
screw
x1
wall
anchor x1
safety
strap x1
Z
Wall Strap
slide
rail x1
slide
rail x1
slide
rail x1
slide
rail x1
small
bolt x4
small
locking
nut x4
KLNM O
screw
x4
PQ
wedge
x4
screw
x4
Phillips & Flathead screwdrivers and hammer required
dowel
x4
RS
allen
key x1
1
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
Assembly Instructions
Thank you for your purchase.
Please follow the instructions below for correct assembl
y.
Chelsea Bedside Table

12
Insert 4x dowels (A) and 2x bolts (C) into panel [2]. Insert 4x dowels (A)
2x dowels (C) into panel [3].
Attach 1x slide rail (F) to panel [2] and secure with 3x small screws (E).
Attach 1x slide rail (G) to panel [3] and secure with 3x small screws (E).
Tighten all with a screwdriver.
3
2
AA
A
A
A
AAA
C
C
C
C
F
G
E
E
E
E
E
E
3
2
2
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
Assembly Instructions
Chelsea Bedside Table

34
Attach panels [4] and [5] to the dowels on panels [2] and [3], securing
with 4x locking nuts (D). Tighten with a screwdriver.
Insert 4x bolts (C) into panel [1].
5
1
D
D
D
D
4
3
2
C
C
C
C
D
3
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
Assembly Instructions
Chelsea Bedside Table

56
Attach panel [1] to panels [2] and [3] using 4x dowels (A) and secure
with 4x locking nuts (D). Tighten with a screwdriver.
1
D
A
A3
2
A
D
7
3
2
Slide panel [7] down along the grooves between side panels [2] and [3]
to form the back of the unit.
Assembly Instructions
4
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
Chelsea Bedside Table

Jolt Wardrobe
ASSEMBLY INSTRUCTIONS
5
mocka.co.nz | mocka.com.au
78
8
6
R
R
M
8
R
N
8
×
Attach 2x legs [8] to panel [6] with 2x dowels (R) and 2x bolts (M) as
shown. Tighten bolts with the allen key (S) and secure with 2x nuts (N).
Tighten the nuts with a flathead screwdriver.
Attach the remaining 2x legs [8] to panel [6] with 2x dowels (R) and 2x
bolts (M) as shown and secure with 2x nuts (N). Tighten the bolts with
the allen key (S) and the nuts with a flathead screwdriver. Hammer in
4x plastic glides (O) to the end of each leg as shown.
MO
O
O
O
R
R8
6
8
R
N
SS
Assembly Instructions
5
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
Chelsea Bedside Table

910
6
3
2
11 12
JJ
JJ
K
K
KK
10
9
10
911
Drawer x1
Insert 4x small bolts (J) into panel [9]. Secure panels [10] and [11] to
panel [9] with 4x small locking nuts (K). Tighten with a screwdriver.
Slide panel [12] down along the grooves between panels [10] and [11]
to form the base of the drawer.
B
A
A
A
B
B
B
Attach panel [6] to the rest of the unit using 4x dowels (A) and secure
with 4x screws (B). Tighten with a screwdriver.
Assembly Instructions
6
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
Chelsea Bedside Table

11
12
1
V
W
Z
Attach 4x wedges (P) to the corners of the back of the unit and secure
with 4x screws (Q). Attach 1x safety strap (V) to the back edge of panel
[1] using 1x washer (Z) and 1x screw (W). Tighten with a screwdriver.
Wall Strap
screw
strap
washer
E
E
E
E
H
I
L
L
LL
10
13
11
10
11
9
Attach panel [13] to panels [10] and [11] using 4x screws (L). Now attach 1x
slide rail (I) to panel [11] and 1x slide rail (H) to panel [10] as shown. Secure
with 4x small screws (E) and tighten with a screwdriver. Insert the
assembled drawer into the unit ensuring it slides smoothly along the rails.
P
Q
P
Q
P
Q
Assembly Instructions
7
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
Chelsea Bedside Table

13 14
Ensure unit is balanced and steady before use. You’re done, enjoy!
X
Y
Z
Once assembled lift furniture into place, do not drag. Use a drill to create
a small hole lining up with the top of the safety strap (V). Fasten to wall
using 1x wall anchor (X), 1x washer (Z) and 1x screw (Y).
Wall Strap
wall
screw
strap
washer
Assembly Instructions
8
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
Chelsea Bedside Table
anchor