Mocka Jack Four User manual

1
Wall Strap
x2
washer
Z
Y
wall
anchor
x1
X
safety
strap x1
WV
screw
x1
wall
screw
x1
Jack Four Drawer
Assembly Instructions
Thank you for your purchase.
Please follow the instructions below for correct assembly.
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
WARNING: Any furniture that is not anchored to a wall has the potential to tip over in certain
circumstances, i.e. if a child attempts to climb up on the furniture or in the event of an earthquake.
Accordingly, we recommend that all furniture is anchored to a wall. We supply a free safety wall anchor
with all furniture sold and we recommend these are used to prevent your product tipping. The fixing device
provided should fit most wall types, but please note that different wall materials may require different fixing
devices from those supplied.
Phillips & Flathead screwdrivers required.
For quicker assembly, we recommend the
use of a power drill on a low-speed setting.
bolt
x12
wedge
x8
screw
x8
screw
x4
A B C D E F
GHJKL
M
I
Hardware Supplied
dowel
x16
screw
x48
slide
rail x4
slide
rail x4
slide
rail x4
slide
rail x4
locking
nut x12
cam bolt
x8
handle
x4
N
Allen key
x1
O P
small bolt
x20
small locking
nutx20
long
screw x8
QR
screw
x24

Jack Four Drawer
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
2
12
Insert 4x bolts (C) into panel [1]. Tighten with a screwdriver. Attach 4x slide rails (F) to panel [3] and secure with 12x screws (E).
Attach 4x slide rails (G) to panel [4] and secure with 12x screws (E).
Insert 8x bolts (C) to the panels [3] and [4]. Tighten with a screwdriver.
C
C
C
C
1
3
E
F
CL
E
G
CR
4
E
E
EE
E
G
G
G
G
EE
E
EE
E
E
C
C
C
C
C
C
E
E
E
E
E
F
F
F
F
E
E
E
E
E
E
E

Jack Four Drawer
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
3
34
Attach panels [5] and [6] to panels [3] and [4] with 4x dowels (A),
and secure with 8x locking nuts (D) and tighten with a screwdriver.
Slide panel [7] down along the grooves between the panels [3] and [4].
3
6
4
5
5
3
4
D
A
A
D
A
A
D
D
D
D
D
7

Jack Four Drawer
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
4
56
Attach panel [1] to panels [3] and [4] with 4x dowels (A) and secure
with 4x locking nuts (D). Tighten with a screwdriver.
Flip the unit and Slide panels [7] down along the grooves between the
panels [3] and [4] to form the back of the unit as shown.
4
4
3
3
D
D
A
A
A
D
1
7

Jack Four Drawer
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
5
78
Attach panel [2] to the rest of the unit using 4x dowels (A) and secure
with 4x screws (B) as shown. Tighten with a screwdriver.
Attach panels [8] to the panels [9] with 8x cam bolts (J) and tighten
with a Allen key (N).
4
2
B
3
JN
J
J
J
A
B
B
A
B
B
A
9
9
8
8
JN

Jack Four Drawer
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
6
910 Drawers x4
Attach leg panels to the bottom panel [2] with 8x long screws (Q),
and tighten with a screwdriver.
Insert 5x small bolt (O) into panel [10]. Tighten with a screwdriver.
O
O
O
O
O
10
Q
QQ
Q
Q
Q
Q
Q
4
3
2
8
9
9
Q
3
8

Jack Four Drawer
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
7
11 Drawers x4 12 Drawers x4
Attach panels [11] ,[12] and [13] to panel [10] with 1x dowel (A),and
secure with 5x small locking nuts (P). Tighten with a screwdriver.
Slide panel [14] along the grooves between the side panels [11] and [12] to
form the base of the drawer.
P
P
A
P
P
10
11
13
12
11
12
14
P

Jack Four Drawer
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
8
13 Drawers x4 14 Drawers x4
Attach panels [11], [12] and [15] with 6x screws (R).Tighten
with a screwdriver.
Attach slide rails (I) and (H) to panels [12] and [11] with 4x small screws (E).
Tighten with a screwdriver.
12
11
15
R
R
R
R
R
R
E
E
E
E
H
I
12
11

Jack Four Drawer
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
9
15 Drawers x4 16
Insert the completed drawers into the main unit as shown, ensuring they
slide easily along the rails.
Attach handle (M) to panel [10] with 2x screws (E).Tighten with a screwdriver.
E
E
M
10

Jack Four Drawer
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
10
17 18
Once assembled lift furniture into place, do not drag. Use a drill to create
a small hole lining up with the top of the safety strap (V). Fasten to the wall
using 1x washer (Z), 1x wall plug (X) and 1x screw (Y). Ensure unit is
balanced and steady before use. You’re done, enjoy!
Attach 8x wedges (K) to the corners of the back panels [7] as shown,
and secure with 8x small screws (L). Attach 1x safety strap (V) to the
top panel [1] of the back side of the unit as shown using 1x washer (Z)
and 1x screw (W). Tighten with a screwdriver.
K
L
K
K
K
L
L
L
L
L
L
K
K
K
K
L
L
K
V
Z
W
V
Z
W
X
Y
Z
V
wall
plug
screw
strap
washer
7
7