Mocka Kids House Hanger User manual

WARNING: Any furniture that is not anchored to a wall has the potential to tip
over in certain circumstances, i.e. if a child attempts to climb up on the furniture
or in the event of an earthquake. Accordingly, we recommend that all furniture
is anchored to a wall. We supply a free safety wall anchor with all furniture sold
and we recommend these are used to prevent your product tipping. The fixing
device provided should fit most wall types, but please note that different wall
materials may require different fixing devices from those supplied.
C
dowel
x2
D
long
screw x14
A
bolt
x7
B
locking
nut x11
*We recommend using a Flathead screwdriver to tighten all locking nuts 100% before first use.
Please clear any loose wood from the locking nut holes before inserting the nut to ensure it locks 100%.
X
Z
Y
W
safety
strap
x3
screw
x3
long
screw
x3
wall
anchor
x3
washer
x3
Phillips & Flathead screwdrivers
For quicker assembly, we recommend the
use of a power drill on a low-speed setting.
E
small
screw x4
F
nut
x14
G
screw
x2
H
screw
x13
I
cover
x24
Kids House Hanger
1
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore BC, QLD, 4558
Assembly Instructions
Thank you for your purchase.
Please follow the instructions below for correct assembly.
J
bolt
x2

12
Attach 3 x safety straps (W) to panel [6] and secure with 3 x screws (Y).
Tighten with a screwdriver.
Insert 5 x nuts (F) into panels [5], [6] and [7]. Insert 2 x dowels (C) into
panel [7]. Attach panels [5], [6] and [7] to panel [3] and secure with
5 x long screws (D). Tighten with a screwdriver. Cover long screws (D)
with 5 x covers (I).
Kids House Hanger
2
mocka.co.nz |mocka.com.au |PO BOX 6171, Maroochydore BC, QLD, 4558
Assembly Instructions

34
Insert 5 x nuts (F) into panels [5], [6] and [7]. Attach panel [4] to panels
[5], [6] and [7] and secure with 5 x long screws (D). Tighten with a
screwdriver. Cover long screws (D) with 5 x covers (I).
Insert 4 x nuts (F) into panels [3] and [4]. Attach panel [8] to panels [3]
and [4] and secure with 4 x long screws (D) and 2 x screws (G). Tighten
with a screwdriver. Cover nuts (F) with 2 x covers (I)
Kids House Hanger
3
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore BC, QLD, 4558
Assembly Instructions

56
Insert 7 x bolts (A) into panel [9]. Tighten with a screwdriver.
Kids House Hanger
Assembly Instructions
4
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore BC, QLD, 4558
B
J
J
B
B
B
B
Insert 2 x bolts (J) and secure with 4x Locking nuts(B) into panel [1] [2].and
Tighten with a screwdriver. Cover Locking nuts (B)
with 4 x covers (I).

Jolt Wardrobe
5
mocka.co.nz | mocka.com.au
78
Attach panel [9] to panels [3], [4] and [6] and secure with 7 x locking
nuts (B). Tighten with a screwdriver. Cover locking nuts (B) with 4 x
covers (I).
Attach panels [1] and [2] to panel [9] and secure with 4 x small screws
(E). Tighten with a screwdriver. Cover small screws (E) with 4 x
covers (I).
Kids House Hanger
Assembly Instructions
5
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore BC, QLD, 4558

910
Insert 13 x screws (H) into panel [10]. Tighten with a screwdriver.
Move the unit into the desired location up against a wall, do not drag.
Use a drill to create a small hole lining up with the top of the 3 x safety
straps (W) and secure with 3 x wall anchors (X), 3 x washers (Z) and
3 x long screws. Ensure the unit is balanced and steady before use.
You’re done, enjoy!
10
Kids House Hanger
Assembly Instructions
6
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore BC, QLD, 4558