Mocka Jesse User manual

*We recommend using a Flathead screwdriver to tighten all locking nuts 100%
inserting the nut to ensure it locks 100%
Jesse Coffee Table
1
mocka.co.nz | mocka.com.au | po Box 6171,Maroochydore,QLD,4558
Assembly Instructions
Thank you for your purchase.
Please follow the instructions below for correct assembly.
For quicker assembly, we recommend the
use of a power drill on a low-speed setting.
Phillips & Flathead screwdrivers
and hammer required
x4
B
A
x30
CD E F
G
x4
x8
nut x30
x12
L + R L + R
bolt locking
dowel
long screw
HIJKL
M N
35 mm
x5
screw
25 mm
x16
small screw
x1
screw bolt
x4
Hardware Supplied
x4
cam nut
cam bolt
bracket
x4
bracket
screw
x8
long screw
x8 x1
allen key
plastic
glide x5
O

12
To begin assembly, screw 8x bolts (A) and insert 6x wooden dowels
(B) into panel [1].
Next attach 2x rail components (DR) to the inside of panels [2]. Attach 2x rail components
(DL) to both sides of panel [3]. Fasten using 8x screws (C) in the holes as shown. Tighten
with a screwdriver.
AB
AB
BA
BA
AB
BA
A
A
A
x8
33
1
C
C
x2
C
3
Jesse Coffee Table
2
mocka.co.nz | mocka.com.au | po Box 6171,Maroochydore,QLD,4558
Assembly Instructions
C
DR
2X2
front back
C
C
DL
DL

34
Slot panels [2], [2], and [3] together with panel [1]. Place 8x locking nuts
(E) into holes in the vertical panels and tighten with a flathead
screwdriver.
Slide the divider panels [4] down into place in the grooves in panels [2]
and [3] as shown. Insert 6x dowels (B) into the top of panels [2] and [3].`
4
4
B
B
B
B
B
B
E
E
E
E
E
E
2
3
2
E
x8
1
Jesse Coffee Table
3
mocka.co.nz | mocka.com.au | po Box 6171,Maroochydore,QLD,4558
Assembly Instructions

56
Attach the central leg [18] to the base panel [5] using 1x screw bolt (K)
through the underside and tighten with Allen key (M) provided.
Attach the base panel [5] to the rest of the table unit by inserting 8x long
screws (H) in the pre-drilled holes and tighten with a screwdriver.
H
K
x1
K
18
55
H
H
H
H
H
H
H
Jesse Coffee Table
Assembly Instructions
4
mocka.co.nz | mocka.com.au | po Box 6171,Maroochydore,QLD,4558

Jolt Wardrobe
ASSEMBLY INSTRUCTIONS
5
mocka.co.nz | mocka.com.au
78
To assemble the base insert 4x bolts (A) and 4x cam bolts (G)
into the legs [6] & [7]. Connect all components together using
4x locking nuts (E) and 4x cam nuts (F). Tighten with a screwdriver.
Screw 10x bolts (A) into the holes in panel [5]. Attach panels [8] and [9]
to panel [5] using 10x locking nuts (E). Tighten with a screw driver.
E
E
A
A
A
A
E
EE
EE
E
A
x10
E
x10
F
E
A
A
x4
6 7
9
9
8
8
6
7
6
7
5
G
G
G
G
F
F
FA
A
A
A
A
A
Jesse Coffee Table
Assembly Instructions
5
mocka.co.nz | mocka.com.au | po Box 6171,Maroochydore,QLD,4558
7
G
F

910
To assemble the drawers screw 4x locking bolts (A) into holes in the
front panel [10] or [12]. Attach side panels [14] and [15] to front panel
by inserting 4x locking nuts (E) into holes in the side panels and tighten
with a flathead screwdriver.
A
x4
E
x4
15
14
10 12
E
E
AA
E
AA
Drawers x2
Jesse Coffee Table
Assembly Instructions
6
mocka.co.nz | mocka.com.au | po Box 6171,Maroochydore,QLD,4558
910
To assemble the drawers screw 4x locking bolts (A) into holes in the
front panel [10] or [12]. Attach side panels [14] and [15] to front panel
by inserting 4x locking nuts (E) into holes in the side panels and tighten
with a flathead screwdriver.
A
x4
E
x4
15
14
10 12
E
E
AA
E
AA
Drawers x2
5
18 M
M
N
N
N
N
7
7
6
6
O
O
O
O
O
O
Attach 4x brackets (M) to legs and panel [5] with 8x bracket screws (N).
Tighten with a screwdriver. Attach 5x plastic glides (O) into the panels with
a hammer as shown.

11
12
Jesse Coffee Table
Assembly Instructions
7
mocka.co.nz | mocka.com.au | po Box 6171,Maroochydore,QLD,4558
Slide the base panel [16] into place in the grooves in side and front
panels as shown.
16
Drawers x2
Attach the back panel [17] in place between the side panels [14] and
[15] using 4x long screws (J) in the holes provided and a screwdriver.
Repeat step for the second drawer.
Drawers (x2)
x4
J
JJ
J
J
17
14
15

13 14
Jesse Coffee Table
Assembly Instructions
8
mocka.co.nz | mocka.com.au | po Box 6171,Maroochydore,QLD,4558
Flip table unit over onto its legs. To complete the assembly slide both
completed drawers into place on the rails in the coffee table unit as
shown.
Attach handles [11] & [13] to the corresponding front panels [10] & [12]
using 5x screws (I). Attach 2x rail components (D) to both left and right
side of each drawer using 4x screws (C). Tighten with a screwdriver.
I
I
I
I
I
11
13
12
10
DR
DR
DL
DL
C
C
C
C
C
C
C
C

15 16
You’re done, enjoy!
Jesse Coffee Table
Assembly Instructions
9
mocka.co.nz | mocka.com.au | po Box 6171,Maroochydore,QLD,4558
Finally ensure all drawers easily slide open and closed. Please extend
the feet on the central leg before first use. Lift the table into the desired
position, do not drag.