Mocka Hudson User manual

mocka.co.nz I mocka.com.au I PO BOX 18, Pinkenba QLD 4008
ASSEMBLY I N S TRUCTION S
Hudson
Kids Chair
Thank you for your purchase.
Please follow the instructions below for correct assembly
Phillips screwdriver
A
24x
bolt
B
4x
bolt
C D
E
Hardware Supplied
1x
4x 4x
locking nut dowel alien key
Once fully assembled please ensure all legs are sitting flush
against the chair underside to ensure stability.
Do not over-tighten bolts.
The recommended age for this set is 2-6 years.
To ensure longevity of the wood please use a damp cloth only
for cleaning. Avoid use of household cleaners.

1
Hudson
mocka.co.nz I mocka.com.au I PO BOX 18, Pinkenba QLD 4008
ASSEMBLY I N S TRUCTION S
2
Kids Chair
2
Find two round seat pieces and four leg braces. Attach two leg braces
to a round seat piece using 2x bolts (A) in each.
Tighten bolts with allen key (E).
Find two long chair leg pieces "L" and "R" and attach to the leg braces
using 2x bolts (A) in each. Fasten bolts using allen key (E) ensuring pieces
sit flush against each other, but do not tighten. Ensure the bolts on
the leg braces are loose. This will help to fit the backrests onto the chair.

Hudson
Kids Chair
mocka.co.nz I mocka.com.au I PO BOX 18, Pinkenba QLD 4008
ASSEMBLY I N S TRUCTION S
Take two front chair legs and attach in place using 2x bolts (A) in each leg.
Tighten bolts with allen key (E).
3 4
Lock 2x bolts (B) to the backrest piece. Tighten bolts with
Phillips screwdriver.
Phillips screwdriver

Phillips screwdriver
mocka.co.nz I mocka.com.au I PO BOX 18, Pinkenba QLD 4008
ASSEMBLY I N S TRUCTION S
Hudson
Kids Chair
5 6
Insert the 2x dowels (D) into the long chair legs as shown. Place the 2x locking nuts (C) into the long chair legs. Align the backrest
piece bolts (B) with the locking nuts (C). Push the backrest piece onto
the tops of the long chair legs as shown. Tighten the 2x locking nuts (C)
with Phillips screwdriver. Tighten all bolts with allen key (E).

Hudson
Kids Chair
mocka.co.nz I mocka.com.au I PO BOX 18, Pinkenba QLD 4008
ASSEMBLY I N S TRUCTION S
Repeat Steps 1 to 6 to assemble the second chair. You’re done, enjoy!
7