Mocka Peyton User manual

Hardware Supplied
Peyton Bed - Queen
1
Assembly Instructions
Thank you for your purchase.
Please follow the instructions below for correct assembly.
mocka.co.nz | mocka.com.au |
the supporting leg.
35mm
bolt x1
25mm
bolt x4
left
plate x2
right
plate x2
double
cap x14
25mm
bolt x8
spring
washer x8
washer
x8
small allen large allen
key x1
key x1
20mm
bolt x20
B
A C D E
F H L R
T2 T3
Phillips & Flathead screwdrivers required.
For quicker assembly, we recommend the
use of a power drill on a low-speed setting.

Peyton Bed - Queen
2
Assembly Instructions
mocka.co.nz | mocka.com.au |
2
1
4
3
3
4
8
8
9
9
5
5
6
7
7
7

Peyton Bed - Queen
3
Assembly Instructions
mocka.co.nz | mocka.com.au |
1a: Attach 1x left plate (L) to panel [3] and 1x right plate (R) to panel
[4] and secure with 4x 20mm bolts (F). Tighten with Allen Key (T2).
1b: Attach panel [3] and panel [4] to panel [1] as shown and
secure with 4x spring washers (C), 4x washers (D) and 4x
25mm bolts (B).Tighten with Allen Key (T3).
L D
B
T3
1b
T2
2a
2b
C
C
D
B
L D
B
T3
C
D C
F
B
F
T2
1a
F
F
1
4
3
4
3
2
2a: Attach 1x left plate (L) to panel [3] and 1x right plate (R) to panel
[4] and secure with 4x 20mm bolts (F). Tighten with Allen Key (T2).
2b: Attach panel [3] and panel [4] to panel [2] as shown and
secure with 4x spring washers (C), 4x washers (D) and 4x
25mm bolts (B).Tighten with Allen Key (T3).

Peyton Bed - Queen
4
Assembly Instructions
mocka.co.nz | mocka.com.au |
34
Join the 2x side panels [3] and Join the 2x side panels [4] together
with 2x connector [9] and secure with 8x 20mm bolts (F). Tighten with
Allen Key (T2).
4a: Insert panel [6] and sit on top of the connector [9] and secure
with 2x 25mm bolts (E). Tighten with Allen Key (T2).
4b: Attach 2x panel [5] to panels [1] and [2] and secure with 4x 20mm
bolts (F) as shown. Tighten with Allen Key (T2).
4c: Attach panels [5] and [6] in the middle with 1x support leg [7] and
secure with 1x 35mm bolt (H). Tighten with Allen Key (T2).
4d: Attach 2x support legs (7) to panels [5] and [5] as shown and
secure with 2x 25mm bolts (E). Tighten with Allen Key (T2).
F
F
1
1
4
2
3
3
4
5
5
7
7
7
6
6
T2
4b
4c
HT2
F
T2
E
4a
7
4d
E
T2
9
T2
9
3
4
3
4

56
Peyton Bed - Queen
5
Assembly Instructions
mocka.co.nz | mocka.com.au |
Join the bed planks together in the middle ofthe frame using 14x
double caps (A). Insert the end ofthe planks into the bed frame as
shown and attach the double caps (A)into panel [8]. Make sure the
double caps (A)click securely into place.
Lift the bed into the desired location, do not drag, You're done, enjoy!
A
8
8
8