Mocka Georgia Console Table User manual

Georgia Console Table
1
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore BC, QLD, 4558
Thank you for your purchase.
Please follow the instructions below for correct assembly.
A
Hardware Supplied
bolt
x14
F
4” screw
x2
G
6” screw
x12
H
barrel nut
x12
I
wall plug
x2
J
wall strap
x2
B
locking nut
x14
C
dowel
x16
D
allen
key
E
2.5” screw
x2
Phillips & Flathead screwdrivers required.
For quicker assembly, we recommend the
use of a power drill on a low-speed setting.
WARNING: Any furniture that is not anchored to a wall has the
potential to tip over in certain circumstances, ie. if a child attempts
to climb on the furniture or in the event of an earthquake.
Accordingly, we recommend that all furniture is anchored to a wall.
We supply a free safety wall anchor with all furniture sold and we
recommend these are used to prevent your product tipping. The
fixing device provided should fit most wall types, but please note
that different wall materials may require different fixing devices from
those supplied.

12
Georgia Console Table
2
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore BC, QLD, 4558
Attach 8 x bolts to panels [3], [4] and [5]. Tighten with a screwdriver. Attach 6 x bolts to panel [6]. Tighten with a screwdriver.
3
4
5
6
A
A
A
A
A
A
A
×2
A
A
A
A
A
A
A

3
3
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore BC, QLD, 4558
Insert 4 x dowels (C) into panels [3] and [4]. Attach panels [3] and [4]
to panels [2] as shown and secure with 4 x bolts (C) and 4 x locking
nuts (B). Tighten with a screwdriver.
Insert 4 x dowels (C) into panels [5]. Attach panels [5] to panels [2] as
shown and secure with 4 x bolts (C) and 4 x locking nuts (B). Tighten
with a screwdriver.
Georgia Console Table
4
3
2
2
4
5
5
2
2
B
B
B
B
C
C
C
B
C
C
C
C
C
B
B
B
B
B
C

5
4
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore BC, QLD, 4558
Insert 4 x dowels [C] into panels [6] and panel [5]. Attach panels [5]
to panel [6] and secure with 6 x locking nuts (B). Tighten with a
screwdriver.
Attach panel [1] to panels [3], [4] and [5] and secure with 6 x screws
(G), 2 x dowels (C) and 6 x barrel nuts (H). Tighten with a screwdriver.
Georgia Console Table
6
5
5
3
4
1
5
5
6
D

7
5
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore BC, QLD, 4558
]4[,]3[slenapot]1[lenaphcattA.]1[lenapotni)C(slewodx2tresnI.nwohssanoitisopotni]7[lenapedilS
and [5] and secure with 6 x bolts (G) and 6 x barrel nuts (H). Tighten
with an allen key (D).
Georgia Console Table
8
D
3
4
15
5
4
7

9
6
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore BC, QLD, 4558
Once assembled lift furniture into place, do not drag.
Attach 2 x wall straps (J) to unit and 2 x screws (E).
Use a drill to create a small hole lining up with the safety straps (J).
Tighten with a screwdriver.
Fasten to wall using 2 x wall anchors (I), 2 x wall screws (F). Tighten
with a screwdriver.
Ensure unit is balanced and steady before use. You’re done, enjoy!
Georgia Console Table
10
4
F
F
F