Mocka Vibe Desk User manual

WARNING: Any furniture that is not anchored to a wall has the potential to tip over
in certain circumstances, i.e. if a child attempts to climb up on the furniture or in
the event of an earthquake. Accordingly, we recommend that all furniture is
anchored to a wall. We supply a free safety wall anchor with all furniture sold and
we recommend these are used to prevent your product tipping. The fixing device
provided should fit most wall types, but please note that different wall materials
may require different fixing devices from those supplied.
A B C D E
F G
Hardware Supplied
dowel
x16
screw
x20
bolt
x20
locking
nut x20
small
screw x3
screw
x12
*We recommend using a Flathead screwdriver to tighten all locking nuts 100% before first use.
Please clear any loose wood from the locking nut holes before inserting the nut to ensure it locks 100%.
stopper
x3
H
screw
x8
I
screw
x11
Wall Strap
x2
washer
Z
Y
wall
anchor
x1
X
safety
strap x1
WV
screw
x1
wall
screw
x1
Vibe Desk
1
mocka.co.nz | mocka.com.au
Assembly Instructions
Thank you for your purchase.
Please follow the instructions below for correct assembly.
Phillips & Flathead screwdrivers required
For quicker assembly, we recommend the
use of a power drill on a low-speed setting.

12
Insert 8x bolts (A) and 8x dowels (C) into panel [1]. Attach panels [2], [3], [4] and [5] to panel [1] and secure with 8x locking
nuts (B). Tighten with a screwdriver.
A
A
A
A
A
A
A
A
CC
C
C
C
C
C
C
13
1
2
5
4
B
B
B
B
B
Vibe Desk
2
mocka.co.nz | mocka.com.au
Assembly Instructions

12
Insert 8x bolts (A) and 8x dowels (C) into panel [1]. Attach panels [2], [3], [4] and [5] to panel [1] and secure with 8x locking
nuts (B). Tighten with a screwdriver.
A
A
A
A
A
A
A
A
CC
C
C
C
C
C
C
13
1
2
5
4
B
B
B
B
B
34
Slide panel [7] between the grooves of panel [2] and [3]. Attach 3x
stoppers (G) to the underside of panel [6] with 3x small screws (F).
Insert 8x dowels (C) into the top of panels [2], [3], [4] and [5]. Attach
panel [6] to the main unit and secure with 8x long screws (H).
Attach brace [13] to panel [6] and secure with 11x screws (I). Tighten
with a screwdriver.
F
G
7
H
C
C
C
C
C
6
3
2
H
H
H
H
H
H
H
13
I
I
I
I
I
I
I
I
I
I
I
6
Vibe Desk
3
mocka.co.nz | mocka.com.au
Assembly Instructions

56
Attach each leg [12] to panel [6] using 20x screws (E). Tighten with a
screwdriver.
Attach panels [8] and [14] to panel [11] using 4x bolts (A) and secure with
4x locking nuts (B). Tighten with a screwdriver.
E
E
E
E
6
8
14
E
Drawers x3
12
12 11
A
B
B
B
B
A
A
A
Vibe Desk
Assembly Instructions
4
mocka.co.nz | mocka.com.au

Jolt Wardrobe
ASSEMBLY INSTRUCTIONS
5
mocka.co.nz | mocka.com.au
56
Attach each leg [12] to panel [6] using 20x screws (E). Tighten with a
screwdriver.
Attach panels [8] and [14] to panel [11] using 4x bolts (A) and secure with
4x locking nuts (B). Tighten with a screwdriver.
E
E
E
E
6
8
14
E
Drawers x3
12
12 11
A
B
B
B
B
A
A
A
78
Slide panel [10] into place between the grooves of side panels [8] and
[14]. Attach rear panel [9] to the side panels and secure with 4x long
screws (D). Tighten with a screwdriver. Repeat these steps to
complete the other two drawers.
Insert all completed drawers into the main unit.
9
10
D
D
8
14
Vibe Desk
Assembly Instructions
5
mocka.co.nz | mocka.com.au