Mocka Hamptons User manual

Phillips & Flathead screwdrivers and hammer required
Assembly Instructions
Thank you for your purchase.
Please follow the instructions below for correct assembly.
1
X
Z
Y
W
safety
strap
x1
screw
x1
long
screw
x1
wall
anchor
x1
washer
x1
mocka.co.nz | mocka.com.au
B
ACDE
F G H
30 mm
12 mm
Hardware Supplied
*We recommend using a Flathead screwdriver to tighten all locking nuts 100% before first use.
bolt
x29
locking
nut x 29
dowel
x12
small
screw x24
I
L + R
slide rail
x6
L + R
slide rail
x6
long
screw x 12
Hamptons Console Table
40 mm
long
screw x 8
J
25 mm
small
screw x4
handle
x 3
K
long
screw x4
WARNING: Any furniture that is not anchored to a wall has the potential to tip
over in certain circumstances, i.e. if a child attempts to climb up on the furniture
or in the event of an earthquake. Accordingly, we recommend that all furniture
is anchored to a wall. We supply a free safety wall anchor with all furniture sold
and we recommend these are used to prevent your product tipping. The fixing
device provided should fit most wall types, but please note that different wall
materials may require different fixing devices from those supplied.

2
12
Hamptons Console Table
Assembly Instructions
Thank you for your purchase.
Please follow the instructions below for correct assembly.
mocka.co.nz | mocka.com.au
A
61
G
G
E
G
5
Attach 2 x left slide rail (G) topanel [5] and secure with 4 x small screw (E).
Attach 2 x right slide rail (G) to panel [5] and secure with 4 x small screw (E).
A
J
A
J
J
J
A
A
Insert 11 x bolt (A) into panels [1] .Attach 4 x screw (J) into panel [6] and[1].
Attach 4 x screw (K) into panel [7] and[1].
Tighten with a screwdriver.
A
A
7
K
K
K
K
A
A
5
EE
E
Drawers (x2)
G
A
A
A

3
34
Hamptons Console Table
Assembly Instructions
Thank you for your purchase.
Please follow the instructions below for correct assembly.
mocka.co.nz | mocka.com.au
GG
B
G
5
3
E
5
1
B
B
B
Attach panel [5] to panels [1]
and secure with 4 x locking nuts (B).
Tighten with a screwdriver.
E
A
A
A
4
A
A
A
EE
G
Attach 1 x left slide rail (G) topanel [3] and secure with 2 x small screw (E).
Tighten with a screwdriver.
Attach 1 x right slide rail (G) to panel [4] and secure with 2 x small screw (E).
Insert 6 x bolt (A) into panel [3] and [4].

4
56
Hamptons Console Table
Assembly Instructions
Thank you for your purchase.
Please follow the instructions below for correct assembly.
mocka.co.nz | mocka.com.au
3
B
4
B
B
C
B
C
9
8
Insert 2 x dowel (C) into panel [8]. Attach panel [8] and[9] to panels [3] and [4]
and secure with 6 x locking nuts (B).
3
4
5
5
1
CC
C
CCC
B
B
B
B
B
B
D
D
8
9
Insert 6 x dowel (C) into panel [1] and[5]. Attach panel [3] and [4]and
[8]and [9] to panels [1] and [5]
and secure with 7 x locking nuts (B).
Attach panels [8] to panel [5] and secure with 2 x long screws(D).
B
W
Y
using 1x screw(Y).
Attach 1 x wall strap (W) to panel [9]
B
B

5
78
Hamptons Console Table
Assembly Instructions
Thank you for your purchase.
Please follow the instructions below for correct assembly.
mocka.co.nz | mocka.com.au
Drawers (x3)
B
B
A
10
A
AA
B
B
11
12
Tighten with a screwdriver.
Insert 12 xbolts (A) into panel [10] .Attach panels [11] and [12] to panel
[10] secure with 12 xlocking nuts (B).
DD
CC
CC
DD
D
D
4
3
2
5
5
Insert 4 x dowel (C) into panel [3] and[4]. Attach panel [5] and [9]and
secure with 2 x long screws(D).
Attach panels [2] to panel [3] and [4] secure with 4 x long screws(D).
9

6
910
Hamptons Console Table
Assembly Instructions
Thank you for your purchase.
Please follow the instructions below for correct assembly.
mocka.co.nz | mocka.com.au
Drawers (x3)
E
E
H
H
E
I
11
12
10
Attach 6 x slide rails (H) to panels [11] and [12] and secure with 12 x small
screw(E). Insert 3 x bolts (I) into panel [10] .
Drawers (x3)
FF
F
F
13
14
12
11
Slide panels [14] between the grooves on panels [11] and [12] to form thebase
of the drawer as shown.
Tighten with a screwdriver.
Attach panel [13] to panels and [11] and [12] secure
with 12 x medium screws(F).

7
11
Hamptons Console Table
Assembly Instructions
Thank you for your purchase.
Please follow the instructions below for correct assembly.
mocka.co.nz | mocka.com.au
Once assembled lift furniture into place, do not drag. Use a drill to create
a small hole lining up with the top of the safety strap (W). Fasten to wall
using wall anchor (X), washer (Z) and screw. Ensure the unit is balaced
and steady before use. You’re done, enjoy!
X
Zx1
wall
screw
wall
anchor
wall
screw
Washer
Strap