Mocka Tahoe Entertainment Unit User manual

M
long
screw x2
shelf
plug x2
A B C D E
FH I JG
Phillips & Flathead screwdrivers and hammer required
Hardware Supplied
dowel
x24
bolt
x29
locking
nut x29
small
screw x8
long
screw x5
For quicker assembly, we recommend the
use of a power drill on a low-speed setting.
Tahoe Entertainment Unit
Assembly Instructions
Thank you for your purchase.
Please follow the instructions below for correct assembly.
x10
long screw
1
L + R
slide rail
x2
L + R
slide rail
x2
mocka.co.nz | mocka.com.au
2
WARNING: Any furniture that is not anchored to a wall has the potential to tip
over in certain circumstances, i.e. if a child attempts to climb up on the furniture
or in the event of an earthquake. Accordingly, we recommend that all furniture
is anchored to a wall. We supply a free safety wall anchor with all furniture sold
and we recommend these are used to prevent your product tipping. The fixing
device provided should fit most wall types, but please note that different wall
materials may require different fixing devices from those supplied.
*We recommend using a Flathead screwdriver to tighten all locking nuts 100% before first use.
Please clear any loose wood from the locking nut holes before inserting the nut to ensure it locks 100%.
40
nut
x4
long
screw x4
K L
hinge
x4
screw
x24
4
N

2
12
Tahoe Entertainment Unit
Assembly Instructions
Thank you for your purchase.
Please follow the instructions below for correct assembly.
mocka.co.nz | mocka.com.au
A
Drawer x 2
5
5
5
1
A
A
A
A
Insert 8 x bolt (A) into panel [5]. Tighten with a screwdriver.
Insert 4 x locking nut (B) into panels [1] .Attach 4 x bolt (A) into panel [1]. Attach
4 x dowel (C) to panel [1] and secure with [5].
Tighten with a screwdriver.
A
A
B
BC
C
B
B
C
C
A
A

3
34
Tahoe Entertainment Unit
Assembly Instructions
Thank you for your purchase.
Please follow the instructions below for correct assembly.
mocka.co.nz | mocka.com.au
6
9
A
A
AA
G
G
Tighten with a screwdriver.Insert 12 x bolt (A) into panel [2] and [6] and [9].
9
6
10
B
B
B
B
C
C
B
Insert 4 x dowel (C) into panel [10]. Attach panel [10] to panels [6] and [9]
and secure with 4 x locking nuts (B). Tighten with a screwdriver.
A
A
A
A
A
A
2
A
A

4
56
Tahoe Entertainment Unit
Assembly Instructions
Thank you for your purchase.
Please follow the instructions below for correct assembly.
mocka.co.nz | mocka.com.au
9
6
10
B
3
4
1
B
C
C
C
C
C
C
B
B
B
C
C
Insert 8 x dowel (C) into panel [1]. Attach panel [1] to panels [3] and [4],[6] and[9]
and secure with 8 x locking nuts (B). Tighten with a screwdriver.
12
13
11
Slide panel [12] and [13] and [26] between the grooves on panels [3],[4] and
[6] and [9] to form the back of the unit as shown. Tighten with a screwdriver.
3
6
9
4

5
78
Tahoe Entertainment Unit
Assembly Instructions
Thank you for your purchase.
Please follow the instructions below for correct assembly.
mocka.co.nz | mocka.com.au
I
I
8
8
7
7
I
J
J
J
J
II
with 4 x long bolts (J). Tighten with a screwdriver.
Insert 4 x nuts (I) into panel [8] . Attach panel [7] to panel [8] and secure
3
4
6
9
2
CC
CC
C
C
C
C
Tighten with a screwdriver.
Insert 8 x dowel (C) into panel [2]. Attach panels [3] to panel [4] and[6] and[9]. [3] ,
[4] and [6] and [9] and secure with 8 x long
nuts (B) .
B
B
B
B
B
B
B
B

6
910
Tahoe Entertainment Unit
Assembly Instructions
Thank you for your purchase.
Please follow the instructions below for correct assembly.
mocka.co.nz | mocka.com.au
8M
2
Attach panel [8] to panel [2] with 10 x long screws (D). Attach centre support 2 x
shekf plug (N) to panel [2]. Attach 2 x long screw (M) to centre support (M) as
L
L
M
M
D
D
D
D
D
D
D
D
D
D
shown.
LL
LL
K
K
K
K
LL
LL
19
20
K
L
Attach 4x hinge (K) to panel [19] and [20] and secure with 8 x small screw (L).

7
11 12
Tahoe Entertainment Unit
Assembly Instructions
Thank you for your purchase.
Please follow the instructions below for correct assembly.
mocka.co.nz | mocka.com.au
15
14
17
B
B
B
B
A
A
A
A
Tighten with a screwdriver.
Insert 5 x bolts (A) into panel [17] .Attach panels [14] and [15] to panel [17]
secure with 5 xlocking nuts (B).
Slide panels [16] between the grooves on panels
[14] and [15] to form thebase of the drawer as shown.
21
15
14
21
H
H
E
E
E
17
Attach panel [21] to panels [14] and[15] secure with 5 x medium screws (F).
Attach 2 x slide rails (H) to panels [14] and [15] and secure with 4 x smallscrew(E).
Tighten with a screwdriver.
22
16
B
17 14
15
FF
F
F
14
15
22
16
F

8
13 14
Tahoe Entertainment Unit
Assembly Instructions
Thank you for your purchase.
Please follow the instructions below for correct assembly.
mocka.co.nz | mocka.com.au
17
19
20
NOTE: If the doors are
uneven or there is a gap in
the middle, loosen or tighten
the screw on the hinge until
K
Attach panel [19] and [20] to panel as shown. Secure with 16 x screws (L).
Tighten with a screwdriver.
EE
G
GE
6
9
Attach 1 x left slide rail (G) to panel [6] and secure with 2 x small screw (E).
Attach 1 x right slide rail (G) to panel [9] and secure with 2 x small screw (E).