Mocka Sadie Queen bed User manual

Sadie Queen bed
Assembly Instructions
Thank you for your purchase.
Please follow the instructions below for correct assembly.
1
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
For quicker assembly, we recommend the
use of a power drill on a low-speed setting.
Hardware Supplied
Phillips & hammer required.
screw
x50
washer
x12
large
Allen Key
x1
long bolt
x14
small
Allen Key
x1
adjuster
x2
elbow
connector
x4
flat
connector
x4
bolt
x12
A B C D E
F G H J
K
screw
x20
ML
I
bolt
x2
N
dowel
x10
locking
nut x2
plastic
glide x6

Sadie Queen bed
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
2
12
Attach panels [3] to panels [1] and [2] and secure with 12x long bolts (C)
and 12x washers (F). Tighten with an small Allen Key (B).
Attach panel [1] to panel [2] with 6x dowels (D).
1
1
3
3
2
2
C
F
F
F
F
FF
FF
F
F
FF
C
C
C
CC
C
C
C
C
CC
C
B
F
D
D
D
D
D
D

Sadie Queen bed
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
3
3 4
Insert 1x bolt (N) into panel [4] and tighten with a screwdriver. Attach
2x elbow connectors (H) to panel [4] and secure with 8x screws (M).
Tighten with a screwdriver.
Attach 2x flat connectors (I) to panel [1] and secure with 8x screws (A).
Tighten with a screwdriver. Attach 3x plastic glides (K) to panel [1] with
a hammer.
1
4
2
M
H
M
H
M
H
A
I
A
I
N
K
K
K

Sadie Queen bed
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
4
65
Attach 2x flat connectors (I) to panel [6] and secure
with 8x screws (A). Tighten with a screwdriver.
Insert 1x bolt (N) into panel [5] and tighten with a screwdriver.
Attach 2x elbow connectors (H) to panel [5] and secure
with 8x screws (M). Tighten with a screwdriver.
5
6
M
H
M
H
M
H
A
I
A
I
A
I
N

Sadie Queen bed
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
5
7 8
Attach panels [4] and [5] to panel [7] with 4x dowels (D) and
secure with 2x locking nuts (L). Tighten with a screwdriver.
Attach 3x plastic glides (K) to panel [7] with a hammer.
Attach 4x panels [11] to panels [4] and [5] and secure with 8x screws (A).
Tighten with a screwdriver.
4
4
55
11
11
7
D
L
K
K
K
L
D
L
A
A
A
A
D
11
11

Sadie Queen bed
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
6
910
Attach panel [6] to panels [4] and [5] and secure with 6x bolts (G).
Tighten with the large Allen Key (J).
Assembly Instructions
1
4
5
6
4
5
H
G
G
G
J
J
I
I
I
H
H
I
I
I
Attach panel [4] and [5] to panel [1] and secure with 6 x Bolts (G).
Tighten with the large Allen Key (J).

Attach 2x panels [9] to panel [8] with 2x Long Bolts (C) and secure
with the small Allen Key (B). Insert the 2x adjusters (E) into the
bottom of panels [9] as shown.
E
C
B
E
C
B
8
9
9
Attach panel [8] to panels [1] and [6] and secure with 4x screws (M)
as shown. Tighten with a screwdriver. Once assembled lift the bed
into place, do not drag. Once in the correct position, rotate the
adjusters (E) to the floor level. Ensure the unit is balanced and
steady before use.
1
6
M
M
M
M
E
E
M
M
Sadie Queen bed
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
7
1211
8
E

Sadie Queen bed
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
8
1413
4
5
A
A
Attach 13x panels [10] to panels [4] and [5] and secure
with 26 x Screws (A). Tighten with a screwdriver.
You're done, enjoy!
3
10