Mocka Soren Queen bed User manual

Soren Queen bed
Assembly Instructions
Thank you for your purchase.
Please follow the instructions below for correct assembly.
1
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
For quicker assembly, we recommend the
use of a power drill on a low-speed setting.
Hardware Supplied
Phillips & hammer required.
screw
x42
washer
x16
large
Allen Key
x1
long bolt
x26
small
Allen Key
x1
adjuster
x2
elbow
connector
x4
flat
connector
x4
bolt
x12
A B C D
E F G H
J K
screw
x20
I
plastic
glide x5

Soren Queen bed
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
2
12
Attach 2x panels [2] to panels [1], [3] and [10]. Secure with 16x long bolts (C)
and 16x washers (F). Tighten with the small Allen Key (B).
Turn over the connected panels, attach 2x flat connector (I) to
panel [3] and secure with 8x screws (A). Tighten with a screwdriver.
Attach 3x plastic glides (K) to panel [3] with a hammer.
10
1
1
1
2
2
3
3
A
A
I
I
A
I
C
F
B
K
K
K
C
F
C
F

Soren Queen bed
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
3
3 4x2
Attach 2x elbow connector (H) to panel [6] and secure with
8x screws (D). Tighten with a screwdriver.
Attach 2x flat connector (I) to panel [4] and secure with
8x screws (A). Tighten with a screwdriver. Attach 2x
panels [5] to panel [4] and secure with 8x long bolts (C).
Tighten with the small Allen Key (B). Attach 2x plastic
glides (K) to panels [5] with a hammer.
4
5
5
6
4
A
I
A
D
D
H
H
I
C
C
B
D
H
K
K

Soren Queen bed
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
4
65
Attach panels [6] to panel [4] and secure with 6x bolts (G).
Tighten with the large Allen Key (J).
Attach panels [6] to panel [3] and secure with 6x bolts (G).
Tighten with the large Allen Key (J).
3
6
66
6
4
G
G
G
H
I
J
H
H
IIJ

Soren Queen bed
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
5
7 8
Attach 2x panels [8] to panel [7] with 2x long bolts (C) and secure
with small Allen Key (B). Insert the 2x adjusters (E) into the bottom
of panels [8] as shown.
Attach panel [7] to panels [3] and [4] and secure with 4 x screws (D).
Tighten with a screwdriver. Once assembled lift the bed into place,
do not drag. Once in the correct position, rotate the adjusters (E) to
the floor level. Ensure the unit is balanced and steady before use.
D
D
D
D
3
7
8
8
4
E
C
C
E
E
B
B
E
E
7
D
D
6
6

Soren Queen bed
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
6
910
Assembly Instructions
Attach 13x panels [9] to panels [6] and secure with 26 x screws (A).
Tighten with a screwdriver.
You're done, enjoy!
A
A
3
9
6
6