Mocka Darcy User manual

HL
RN
I
Hardware Supplied
connector
x2
connector
x2
double
cap x12
25mm
bolt x8
spring
washer x8
washer
x12
25mm
bolt x6
left
plate x2
right
plate x2
20mm
bolt x20
35mm
bolt x1
nut
x2
AC D E
FG
B
allen
key x1
spanner
x1
T-2 T-3 T-4
allen
key x1
Darcy Bed
1
mocka.co.nz | mocka.com.au
Assembly Instructions
Thank you for your purchase.
Please follow the instructions below for correct assembly.

12
Attach the leg panels [7] to the bottoms of panels [1] and [2] as shown.
2a: Join panels [3] together as shown using 2x connectors (C) and 2x
connectors (B) and secure with 4x washers (F) and 8x 20mm bolts (N). Tighten
with the allen key (T-2).
2b: Attach panels [3] to panels [1] and [2] using 2x left plates (L) and 2x right
plates (R) as shown. Secure with 8x 20mm bolts (N) and the allen key (T-2).
2c: Secure the other side of the plates as shown using 8x washers (F), 8x
spring washers (E), and 8x 25mm bolts (D). Tighten with the allen key (T-2).
27
1 7
7
7
7L
R
L
R
2a
2c
2b
LE
D
F
T-2
F
N
T-2
N
T-2
L
C
B
3
3
3
32
1
N
Darcy Bed
2
mocka.co.nz | mocka.com.au
Assembly Instructions

12
Attach the leg panels [7] to the bottoms of panels [1] and [2] as shown.
2a: Join panels [3] together as shown using 2x connectors (C) and 2x
connectors (B) and secure with 4x washers (F) and 8x 20mm bolts (N). Tighten
with the allen key (T-2).
2b: Attach panels [3] to panels [1] and [2] using 2x left plates (L) and 2x right
plates (R) as shown. Secure with 8x 20mm bolts (N) and the allen key (T-2).
2c: Secure the other side of the plates as shown using 8x washers (F), 8x
spring washers (E), and 8x 25mm bolts (D). Tighten with the allen key (T-2).
27
1 7
7
7
7L
R
L
R
2a
2c
2b
LE
D
F
T-2
F
N
T-2
N
T-2
L
C
B
3
3
3
32
1
N
34
3a: Attach panel [9] to connectors (B) using 2x 25mm bolts (I) and 2x nuts
(G). Tighten with the allen key (T-3) and spanner (T-4). 3b: Attach panels
[4] and [5] as shown using 4x 20mm bolts (N). 3c: Secure the centre join
and leg [6] as shown with 1x 35mm bolt (H). 3d: Attach the other legs [6]
as shown using 4x 25mm bolts (I). Tighten with the allen key (T-3).
Join each panel [8] to a double cap (A) and attach to panels [4] and [5].
Slot the ends of panels [8] into panels [3] as shown. Carefully lift the bed
into the desired position, do not drag. You’re done, enjoy!
9
1
3c
3a
3b
3d
HT-3
N
T-3
N
IT-3
T-4
I
T-3
5
4
6
9
A
8
3
6
8
8
G
Darcy Bed
3
mocka.co.nz | mocka.com.au
Assembly Instructions