Mocka Sadie Desk User manual

Sadie Desk
Assembly Instructions
Thank you for your purchase.
Please follow the instructions below for correct assembly.
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
1
Wall Strap
x2
washer
Z
Y
wall
anchor
x1
X
safety
strap x1
WV
screw
x1
wall
screw
x1
WARNING: Any furniture that is not anchored to a wall has the potential to tip over in certain
circumstances, i.e. if a child attempts to climb up on the furniture or in the event of an earthquake.
Accordingly, we recommend that all furniture is anchored to a wall. We supply a free safety wall anchor
with all furniture sold and we recommend these are used to prevent your product tipping. The fixing device
provided should fit most wall types, but please note that different wall materials may require different fixing
devices from those supplied.
bolt
x57
x4
AB C D E F G H
J KI
Hardware Supplied
dowel
x18
screw
x24
slide
rail x2
slide
rail x2
slide
rail x2
slide
rail x2
locking
nut x57
screw
x12
x4
wedge screw
x8
L
screw
M
plastic
glide x8
aluminum
strip
x2
NO
For quicker assembly, we recommend the
use of a power drill on a low-speed setting.
Phillips & Flathead screwdrivers
and hammer required
allen key
x1

Sadie Desk
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
2
1 2
Attach 2x slide rails (G) to panel [3] with 6x screws (E). Tighten with
a screwdriver. Insert 4x bolts (C) into panel [3]. Tighten with a screwdriver.
Attach 2x slide rails (F) to panel [4] with 6x screws (E). Tighten
with a screwdriver. Insert 6x bolts (C) into panel [4] as shown.
Tighten with a screwdriver.
CR
G
E
F
CL
E
CC
CC
CC
G
G
E
E
E
E
E
E
E
E
E
E
F
F
E
E
CC
C
C
FLIP
3
3
3
4
3
4

Sadie Desk
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
3
3 4
Insert 4x bolts (C) into panels [5] and [24] as shown. Tighten
with a screwdriver.
Attach panels [5] and [24] to panels [6] with 6x screws (B) and 4x dowels (A).
Tighten with a screwdriver.
CC
B
B
B
B
B
B
A
A
3
5
3
24
3
5
3
24
3
6
CC
B

Sadie Desk
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
4
65
Attach panels [7] to panels [5] and [24], secure with 4x locking nuts (D).
Tighten with a screwdriver.
Attach panel [4] to panel [7], secure with 2x locking nuts (D).
Tighten with a screwdriver.
D
D
D
3
4
3
5
3
24
3
7
3
7
3
7
D
D

Sadie Desk
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
5
7 8
Insert 8x bolts (C) into panel [9]. Tighten with a screwdriver.
Attach panel [7] to panel [3], attach panel [8] to panels [3] and [4],
secure with 6x locking nuts (D). Tighten with a screwdriver.
DD
D
C
CC
C
C
C
C
C
3
3
3
4
3
7
3
9
3
8

Sadie Desk
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
6
910
Assembly Instructions
Attach panel [9] to panels [3] and [4] with 6x screws (B) and 4x dowels (A).
Tighten with a screwdriver.
Insert 4x bolts (C) into panels [10]. Attach panels [10] and [11] together with
4x locking nuts (D). Tighten with a screwdriver. Attach 8x plastic glide (N)
to panels [10] and [11] using a hammer.
B
B
B
B
B
B
A
A
A
C
D
D
D
D
C
X2
N
N
N
N
N
N
N
N
3
3
3
4
3
11
3
11
3
10
3
10
3
10
3
9
B

Sadie Desk
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
7
1211
Attach panels [10] and [11] to panel [9] with 8x locking nuts (D).
Tighten with a screwdriver.
Slide panels [23] down along the grooves between the panels [3] and [4].
D
D
D
D
3
3
3
3
3
23
3
4
3
4
3
11
3
11
3
10
3
10
3
9

Sadie Desk
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
8
13 14
Insert 2x bolts (C) into panel [2] as shown. Tighten with a screwdriver. Attach panel [12] to panel [2] with 2x locking nuts (D). Tighten with a screwdriver.
C
C
D
D
3
2
3
2
3
12

Sadie Desk
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
9
15 16
Attach panel [12] to panel [4] with 2x locking nuts (D). Tighten
with a screwdriver.
Insert 10x dowels (A) into panels [2], [3], [4], [5] and [24]. Tighten
with a screwdriver.
D
A
D
A
A
A
A
A
A
A
A
A
3
2
3
3
3
4
3
4
3
5
3
24
3
12

Sadie Desk
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
10
17 18
Insert 21x bolts (C) into panel 1] as shown. Tighten with a screwdriver. Attach panels [13] to panel [1] with 4x locking nuts (D). Tighten
with a screwdriver.
CC
CCC
C
C
D
D
C
C
C
C
C
C
C
C
C
C
C
C
C
C
3
13
1
3
13
3
13