Mocka Porto Entertainment Unit User manual

Porto Entertainment Unit
1
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore BC, QLD, 4558
Phillips screwdriver required
Hardware Supplied
For quicker assembly, we recommend the
use of a power drill on a low-speed setting.
A
50mm
screw x22
B
30mm
screw x24
D
Wall
anchor x2
C2
14mm
screw x2
E
wall
strap x2
C1
25mm
screw x2
Wall Strap
Thank you for your purchase.
Please follow the instructions below for correct assembly.

12
Porto Entertainment Unit
2
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore BC, QLD, 4558
Attach 2 x legs [4] to 2 x base support panels [6] and 2x top support
panels [5] and secure with 16 x 30mm screws (B). Tighten with a
screwdriver.
Attach 2 x cross-beams [7] to the assembled frame and secure with 8
x 30mm screws (B). Tighten with a screwdriver.
B
B
B
B
B
B
B
B
B
B
B
B
6
7
7
5
5
4
4

3
3
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore BC, QLD, 4558
Attach panels [1] and [2] to assembled frame and secure with 16 x
50mm screws (A). Tighten with a screwdriver.
Attach panels [3] to panels [6] and secure with 6 x 50mm screws (A).
Tighten with a screwdriver.
Porto Entertainment Unit
4
A
AA
A
A
A
A
A
A
A
A
A
A
A
A
A
1
2
2
3

5
4
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore BC, QLD, 4558
Porto Entertainment Unit
Lift the furniture into the desired location, do not drag. Attach 2 x wall
straps (E) to the back sides of panel [2] and secure with 2 x 25mm
screws (C2). Fasten to wall using 2 x wall anchors (D) and 2 x 14mm
screws (C1). Tighten with a screwdriver. Ensure unit is balanced and
steady before use. You’re done, enjoy!
E
C1
D
E
C2