Mocka Vigo Shelf - Slim User manual

Phillips screwdriver required
A
To ensure longevity of the
wood please use a damp
cloth only for cleaning.
Avoid use of household
cleaners.
C
B
50mm
screw x32
25mm
screw x2
wall
plug x2
safety
strap x2
D
Hardware Supplied
WARNING: Any furniture that is not anchored to a wall has the
potential to tip over in certain circumstances, i.e. if a child
attempts to climb up on the furniture or in the event of an
earthquake. Accordingly, we recommend that all furniture is
anchored to a wall. We supply a free safety wall anchor with all
furniture sold and we recommend these are used to prevent
your product tipping. The fixing device provided should fit most
wall types, but please note that different wall materials may
require different fixing devices from those supplied.
Vigo Shelf - Slim
1
mocka.co.nz | mocka.com.au
Assembly Instructions
Thank you for your purchase.
Please follow the instructions below for correct assembly.

12
Bring together the legs of the shelf and attach the two lower back
supports [2] with 4x screws (A) using a screwdriver. On the same level
as the supports, attach a shelf [1] using 4x screws each. You may need
two people to manage the first step.
Attach the lowest shelf [1] and third shelf [1] using 4x screws (A) each.
2
1
A x16
A x8
2
1
1
1
Vigo Shelf - Slim
2
mocka.co.nz | mocka.com.au
Assembly Instructions

12
Bring together the legs of the shelf and attach the two lower back
supports [2] with 4x screws (A) using a screwdriver. On the same level
as the supports, attach a shelf [1] using 4x screws each. You may need
two people to manage the first step.
Attach the lowest shelf [1] and third shelf [1] using 4x screws (A) each.
2
1
A x16
A x8
2
1
1
1
34
Attach the top shelf and the remaining support to the top with the last 8x
screws (A), using 2x of them to secure the wall strap (D) as shown. Check
over the shelf for stability and secure any loose screws, making sure not
to overtighten. Once assembled lift furniture into place, do not drag.
Secure the other end of the safety strap (D) to the wall using 2x wall
plugs (C) and 2x 25mm screws (B). All done! Regularly check all screws
are secure but not overly tightened. Enjoy!
A x8 B
C
DD
D
Vigo Shelf - Slim
3
mocka.co.nz | mocka.com.au
Assembly Instructions