Mocka Jesse Entertainment Unit User manual

*We recommend using a Flathead screwdriver to tighten
all locking nuts 100% before first use.
Please clear any loose wood from the locking nut holes
before inserting the nut to ensure it locks 100%.
WARNING: Any furniture that is not anchored to a wall has the
potential to tip over in certain circumstances, i.e. if a child
attempts to climb up on the furniture or in the event of an
earthquake. Accordingly, we recommend that all furniture is
anchored to a wall. We supply a free safety wall anchor with all
furniture sold and we recommend these are used to prevent
your product tipping. The fixing device provided should fit most
wall types, but please note that different wall materials may
require different fixing devices from those supplied.
Wall Mount
x2
washer
Z
wall
screw
Y
wall
anchor
x1
X
safety
strap x1
W
V
screw
x1
x1
Jesse Entertainment Unit
1
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore BC, QLD, 4558
Assembly Instructions
Thank you for your purchase.
Please follow the instructions below for correct assembly.
plastic
glide x6
M
x4
B
A
x20
CD E F
G
x4
x28
nut x20
x24
L + R L + R
bolt locking
dowel
long screw
H
I
JKL
35 mm
x5
screw
25 mm
x16
small screw
x2
screw bolt
x4
Hardware Supplied
x4
cam nut
cam bolt
x8
long screw
x1
allen key
For quicker assembly, we recommend the
use of a power drill on a low-speed setting.
Phillips & Flathead screwdrivers
and hammer required

12
To begin assembly, screw 8x bolts (A) and insert 8x wooden dowels
(B) into the table base panel [1].
Next attach 4x rail components (D) to the inside of panels [2], [3], [4] &
[5] using 2x screws (C) in each and the holes provided.
1
AB
BA
AB
BA
AB
BA
AB
BA
A
x8
3
C
C
D
5
C
C
D
4C
C
D
2
C
C
D
C
2
3cm
C
3cm
3
Jesse Entertainment Unit
2
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore BC, QLD, 4558
Assembly Instructions
C
4
C
5

34
Slot panels [2], [4], [5) and [3] together with panel [1]. Place 8x locking
nuts (E) into holes in the vertical panels and tighten with a flathead
screwdriver.
Slide the divider panels [19] and [20] down into place in the grooves in
panels [2], [4], [5] and [3] as shown. Insert 8x dowels (B) into
the top of panels [2], [3], [4] and [5].
1
3
E
5
4
2
E
E
E
E
E
E
x8
20
19
19
B
B
B
B
B
B
B
B
Jesse Entertainment Unit
3
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore BC, QLD, 4558
Assembly Instructions

56
Attach the two central legs [18] to the base panel [21] using 2x screw
bolts (K) through the underside and tighten with allen key (L) provided.
K
18 21
K
18
Jesse Entertainment Unit
Assembly Instructions
4
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore BC, QLD, 4558
56
Attach the two central legs [18] to the base panel [21] using 2x screw
bolts (K) through the underside and tighten with allen key (L) provided.
K
18 21
K
18
x2
K
A
A
x4
6 7
EE
F
F
F
F
E
8
6
7
8
7
6
9
9
G
G
G
G
7
G
F
To assemble the base insert 4x bolts (A) and 4x cam bolts (G)
into the legs [6] & [7]. Connect all components together using
4x locking nuts (E) and 4x cam nuts (F). Tighten with a screwdriver.

Jolt Wardrobe
ASSEMBLY INSTRUCTIONS
5
mocka.co.nz | mocka.com.au
78
Jesse Entertainment Unit
Assembly Instructions
5
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore BC, QLD, 4558
21
8
8
9
9
B
B
B
B
J
J
JJ
J
B
Attach the base panel [21] to the rest of the unit by inserting 8x long screws (H)
and tighten with a screwdriver. Attach 6x plastic glides (M) into the panels with a
hammer as shown.
H
21
H
H
H
H
H
H
H
Attach panel [21] to leg panels with 8x dowels (B) and secure
with 20x screws (J). Tighten with a screwdriver.
M
M
M
M
M
M
M

910
To assemble the drawers screw 4x locking bolts (A) into holes in the
front panel [10] or [12]. Attach side panels [14] and [15] to front panel
by inserting 4x locking nuts (E) into holes in the side panels and tighten
with a flathead screwdriver.
Slide the base panel [16] into place in the grooves in side and front
panels as shown.
A
x4
E
x4
16
14
15
10 12
E
E
AA
E
AA
Drawers x2 Drawers x2
Jesse Entertainment Unit
Assembly Instructions
6
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore BC, QLD, 4558

11
12
Attach the back panel [17] in place between the side panels [14] and
[15] using 4x long screws (J) in the holes provided and a screwdriver.
Repeat step for the second drawer.
Attach handles [11] & [13] to the corresponding front panels [10] & [12]
using 5x screws (I). Attach 2x rail components (D) to both left and right
side of each drawer using 4x screws (C).
Drawers x2
x4
J
JJ
J
J
17
15
14
I
I
I
I
I
11
13
12
10
DR
DR
DL
DL
C
C
C
C
C
C
C
C
Drawers x2
Jesse Entertainment Unit
Assembly Instructions
7
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore BC, QLD, 4558

13 14
Flip the side board unit over onto its legs. To complete the assembly
slide both completed drawers into place on the rails in the side board
unit as shown.
Finally ensure all drawers easily slide open and closed. Please extend
the feet on the 2x central legs before first use.
Jesse Entertainment Unit
Assembly Instructions
8
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore BC, QLD, 4558
13 14
Flip the side board unit over onto its legs. To complete the assembly
slide both completed drawers into place on the rails in the side board
unit as shown.
Finally ensure all drawers easily slide open and closed. Please extend
the feet on the 2x central legs before first use.

15 16
Once assembled lift furniture into place, do not drag. Attach 1x safety
strap (V) to the top of the back side of the unit using 1x washer (Z) and
1x screw (W). Tighten with a screwdriver.
Move the unit into the desired location up against a wall. Use a drill to
create a small hole lining up with the top of the safety strap (V). Fasten
to wall using 1x wall plug (X), 1x washer (Z) and 1x wall screw (Y).
Ensure unit is balanced and steady before use. You’re done, enjoy!
Wall Mount
V
W
Z
Z
V
W
washer
X
Y
Z
wall
plug
screw
strap
washer
Jesse Entertainment Unit
Assembly Instructions
9
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore BC, QLD, 4558