Mocka Marlow Coffee Table User manual

A B C D E F
dowel
x16
bolt
x28
locking
nut x28
small
long
screw
x28
GH
L + R slide
rail x4
screw
x8
I
screw
x40
JK
Marlow Coffee Table
Assembly Instructions
Thank you for your purchase.
Please follow the instructions below for correct assembly.
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
1
WARNING: Any furniture that is not anchored to a wall has the potential to tip over in certain
circumstances, i.e. if a child attempts to climb up on the furniture or in the event of an earthquake.
Accordingly, we recommend that all furniture is anchored to a wall. We supply a free safety wall anchor
with all furniture sold and we recommend these are used to prevent your product tipping. The fixing device
provided should fit most wall types, but please note that different wall materials may require different fixing
devices from those supplied.
For quicker assembly, we recommend the
use of a power drill on a low-speed setting.
Hardware Supplied
L
* We recommend using a Flathead screwdriver to tighten all locking nuts 100% before first use.
Please clear any loose wood from the locking nut holes before inserting the nut to ensure it locks 100%.
bolt
x4
nut
x4
adjuster
x1
felt pad
x4
Phillips & Flathead screwdrivers required.

Marlow Coffee Table
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
2
12 x2
Insert 12x bolts (C) into panel [1], and tighten with a screwdriver. Attach 2x slide rails (G) to panels [3] and 2x slide rails (H) to panels [4]
as shown and secure with 12x small screws (E). Tighten with a screwdriver.
Repeat this step.
C
1
G
CL
E
H
CR
E
E
H
GE
G
H
E
E
3
4

Marlow Coffee Table
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
3
34
Attach 2x panels [3] and 2x panels [4] to panel [1] with 8x dowels (A)
and secure with 12x locking nuts (D). Tighten with a screwdriver.
Slide panel [5] down along the grooves between the panels [4],
to form the back of the unit as shown.
A
D
D
3
4
4
3
1
3
4
4
3
5

Marlow Coffee Table
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
4
56
Attach panel [2] to panels [3] and [4] with 8x dowels (A) and secure
with 12x long screws (B). Tighten with a screwdriver.
Attach the leg panels [6] and [7] together and secure with 4x
bolts (J) and 4x nuts (I). Tighten with a screwdriver.
A
BI
2
3
4
3
4
6
6
7
7
J
I

Marlow Coffee Table
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
5
78
Attach panels [6] and [7] to panel [2] and secure with
8x screws (F).Tighten with a screwdriver.
Apply 4x felt pads (L) to panels [6] as shown. Attach 1x support
leg [8] to panel [2] and turn until firm. Insert the adjuster (K) into the
support leg [8].
F
K
2
6
7
8
2
L
6
6
K

Marlow Coffee Table
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
6
9 Drawers x4 10 Drawers x4
Insert 4x bolts (C) to panel [9] and secure with 4x locking nuts (D).
Attach panel [10] and [11] to panel [9] and secure with 4x locking nuts (D).
Tighten with a screwdriver. Slide panel [12] along the grooves between
the side panels [10] and [11] to form the base of the drawer.
Attach panels [10], [11] and [13] as shown using 4x long screws (B).
Tighten with a screwdriver. Attach slide rail (G) and slide rail (H) to the
underside of the side panels as shown. Secure with 4x small screws (E)
and tighten with a screwdriver.
C
D
9
9
10
11
12
10
11
10
11
13
11
10
E
E
G
H
B

Marlow Coffee Table
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
7
11 12
Insert the assembled drawers into the corresponding compartments as
shown. Ensure the drawers slide easily along the rails.
9
9
Once assembled lift furniture into place, do not drag. Ensure unit is
balanced and steady before use. You’re done, enjoy!