Mocka Noah Play Table User manual

Phillips & Flathead screwdrivers and hammer required
Hardware Supplied
*We recommend using a Flathead screwdriver to tighten all locking nuts 100% before first use.
Please clear any loose wood from the locking nut holes before inserting the nut to ensure it locks 100%.
For quicker assembly, we recommend the
use of a power drill on a low-speed setting.
Noah Play Table
Assembly Instructions
Thank you for your purchase.
Please follow the instructions below for correct assembly.
1
mocka.co.nz | mocka.com.au
nut
x4
A
long bolt
x4
BC
x6
screw

2
12
Noah Play Table
Assembly Instructions
Thank you for your purchase.
Please follow the instructions below for correct assembly.
mocka.co.nz | mocka.com.au
A
A
AA
B
B
B
B
2
2
3
3
B
1
3
3
C
C
C
C
C
C
Insert 4 x nuts (B) into panel [3]. Attach panel [2] to panel [3] and secure
with 4 x long bolt (A). Tighten with a screwdriver.
Attach panels [2] and [3] to panel [1] and secure with 6 x long screws (C).
Tighten with a screwdriver.
2