Mocka Belinda User manual

1
Hardware Supplied
Belinda Kids Single & King Single Bed
Thank you for your purchase.
Please follow the instructions below for correct assembl y.
mocka.co.nz | mocka.com.au |
F
35mm
bolt x1
H
25mm
bolt x4
L
left
plate x2
R
right
plate x2
double
cap x12
A B
25mm
bolt x8
C
spring
washer x8
D
washer
x
E
T3
large allen
key x1
small allen
key x1
T2
20mm
bolt x20
8
Assembly Instructions

Assembly Instructions
mocka.co.nz | mocka.com.au |
2
2
1
4
5
3
6
8
8
10
12
9
11
7
7
7
7
12
11
11
10
Belinda Kids Single & King Single Bed

mocka.co.nz | mocka.com.au |
3
Belinda Kids Single & King Single Bed
L
B
T3
1c
T2
2b
2c
C
D
C
D
B
L
B
T3
C
C
F
B
F
T2
1b
1a
F
F
1
4
3
6
5
2
D
D
7
7
7
7
7
2a
7
1
Assembly Instructions
1b: Attach 1x left plate(L) to panel[3] and 1x right plate(R) to panel[4] and
secure with 4x 20mm bolts(F). Tighten with Allen Key (T2).
1c: Attach panels[3] and panels[4] to panel[1] as shown and secure with
4x spring washers(C), 4x washers(D) and 4x 25mm bolts(B). Tighten
with Allen Key (T3).
2b: Attach 1x left plate(L) to panel[5] and 1x right plate(R) to panel[6] and
secure with 4x 20mm bolts(F). Tighten with Allen Key (T2).
2c: Attach panels[5] and panels[6] to panel[2] as shown and secure with
4x spring washers(C), 4x washers(D) and 4x 25mm bolts(B). Tighten
with Allen Key (T3).
R
R
L
L
1a: Attach 2x legs[7] to panel[1] as shown. 2a: Attach 2x legs[7] to panel[2] as shown.

Assembly Instructions
mocka.co.nz | moc
4
ka.com.au |
4a: Insert panel [9] and sit on top of the connector leg (10) and secure with
2x 25mm bolts (E). Tighten with Allen Key (T2).
4b: Attach panels [12] to panels [1] and [2] and secure with 4x 20mm
bolts (F) as shown. Tighten with Allen Key T2).
4c: Attach panels [12] and [9] in the middle with 1x support leg [11] and
secure with 2x 25mm
4d: Attach 2x support le
secure with 1x 35mm bolt (H). Tighten with Allen Key (T2). making sure
panels [12] are sitting under panel [9].
gs (11) to panels [12] as shown and
bolts (E). Tighten with Allen Key (T2).
F
F
1
1
4
2
5
3
612
11 9
9
T2
4b
4c
HT2
F
T2
F
F
F
T2
E
4a
11
4d
E
T2
Belinda Kids Single & King Single Bed
10
Join the side panel[3] & panel[6] and join the side panel[4] & panel[5]
together with 2x connector leg(10) and secure with 8x 20mm bolts
(F), Tighten with Allen Key (T2).
12
10
11
11
2
11

Assembly Instructions
Lift the bed into the desired location, do not drag, You're done, enjoy!
A
5
Belinda Kids Single & King Single Bed
mocka.co.nz | mocka.com.au |
8
8
8
Take x 12 plank (8) and insert them into the slats down the inside of the
right-hand side of the bed frame as shown. Then take x 12 plank (8) and
insert them into the slats down the inside of the left-hand side of the bed
frame as shown. Starting at the top of the bed insert both sides of slats
into the double caps (A) as shown. Once all slats have been done then
push/click the caps securely into place into the metal center piece.