Mocka Zara User manual

Zara Two Door Cabinet
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
1
Wall Strap
x2
washer
Z
Y
wall
anchor
x1
X
safety
strap x1
WV
screw
x1
wall
screw
x1
bolt
x14
A B C D E F GHJ
K
I
Hardware Supplied
dowel
x24
screw
x6
bolt
x16
bracket
x4
allen key
x1
shelf
plug
x4
screw
x4
locking
nut x14
screw
x10 x8
wedge
LMNO P Q R
screw
x8
hinge
x4
screw
x24
cover
x2
bracket
x2
seal
x2
S
screw
x8
felt pad
x4
WARNING: Any furniture that is not anchored to a wall has the potential to tip over in certain
circumstances, i.e. if a child attempts to climb up on the furniture or in the event of an earthquake.
Accordingly, we recommend that all furniture is anchored to a wall. We supply a free safety wall anchor
with all furniture sold and we recommend these are used to prevent your product tipping. The fixing device
provided should fit most wall types, but please note that different wall materials may require different fixing
devices from those supplied.
For quicker assembly, we recommend the
use of a power drill on a low-speed setting.
Phillips & Flathead screwdrivers
and hammer required
Thank you for your purchase. Please follow the instructions for correct assembly.
While we took great effort to ensure these assembly instructions were correct at
the time of printing, sometimes updates are required post production. For the
most up to date versions please refer to the product page on our website.
mocka.com.au/mocka.co.nz

Zara Two Door Cabinet
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
2
Panel layout 1
Insert 6x bolts (C) into panel [1] and tighten with a screwdriver. Attach
2x brackets (P) to panel [1] and secure with 4x screws (E). Place 2x
cover (Q) over the bracket (P) as shown. Tighten with a screwdriver.
CC
C
C
C
C
E
E
PP
1
EE
Q
PP
x4
1
2
13
9
14
7
7
3
8
5
6
15
11 11
10
12
12
4

Zara Two Door Cabinet
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
3
2
Insert 2x bolts (C) into panel [3]. Tighten with a screwdriver.
Attach panel [15] to panel [1] secure with 4x screws (O). Tighten with
a screwdriver.
O
O
O
O
1
15
C
C
3
O3

Zara Two Door Cabinet
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
4
45
Insert 2x bolts (C) into panel [4]. Tighten with a screwdriver. Attach panel [3] and [4] to panel [6] with 4x dowels (A) and secure
with 4x locking nuts (D). Tighten with a screwdriver.
A
A
A
A
D
D
D
D
D
3
6
4
C
C
4

Attach panel [3] and [4] to panel [1] with 4x dowels (A) and secure
with 4x locking nuts (D). Tighten with a screwdriver.
D
D
A
A
A
A
3
1
4
Zara Two Door Cabinet
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
5
76
Attach panel [2] to panel [1] with 2x dowels (A) and secure with 2x locking
nuts (D). Tighten with a screwdriver.
D
A
A
1
2

Zara Two Door Cabinet
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
6
98
Attach panel [8] to panels [2], [3] and [4] with 6x dowels (A) and secure
with 6x screws (B). Tighten with a screwdriver.
4
A
A
A
A
B
B
B
B
B
B
8
2
3
Slide panels [7] down along the grooves between the panels [2], [3]
and [4] as shown.
4
3
2
7
7
Ensure laminated
side of panel is facing
inwards

Zara Two Door Cabinet
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
7
10 11
Insert 4x bolts (C) into panel [10]. Tighten with a screwdriver. Attach
panels [11] to panel [10] with 4x dowels (A) and secure with 4x screws (B).
Tighten with a screwdriver.
FF
K
FF
FF
FF
F F
S
G
G
G
G
G
G
S
B
B
B
B
K
K
K
H
K
8
9
9
9
9
10
10
11
11
92
4
Attach a leg bracket (G) to each leg [9] using 2x screws (S). Tighten
with a screwdriver. Attach each leg [9] to panel [8] using 16x bolts (F)
as shown. Tighten with an allen key (H). Attach 4x felt pads (K) to the
ends of the legs.
C
C
C
C
A
A
A
A
pvc edge
pvc edge
front
front
back

Zara Two Door Cabinet
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
8
12 13
Attach panels [12] to panel [10] with 4x dowels (A) and secure with
4x locking nuts (D). Tighten with a screwdriver
10
2
3
4
Insert panel [10] to panels [3] and [4].
10
12
A
A
pvc edge
D
D
10
12
A
A
pvc edge
D
D
pvc edge

Zara Two Door Cabinet
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
9
14
Assembly Instructions
Attach 4x hinges (M) to panels [13] and [14] using 8x screws (N),
and attach 2x seals (R) to panels [13] and [14] and secure with
2x screws (E). Tighten with a screwdriver.
Attach hinges (M) on panels [13] and [14] to the unit using 16x screws (N).
Tighten with a screwdriver. Ensure the doors open and close easily. If the
cover (Q) is not catching on the seal (R), adjust the magnetic end by
twisting it outwards.
NOTE: If the doors are uneven or there is a gap
in the middle, loosen or tighten the screw on the
door hinge until they are sitting flush.
M
N
M
N
M
N
13
14
2
4
Q
M
N
N
E
E
R
R
M
N
N
M
M
N
N
M
N
N
NN
13
14
15

16
Zara Two Door Cabinet
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
10
17
V
Z
J
J
L
J
L
J
J
J
J
J
L
L
L
L
L
L
W
V
Z
W
Attach 8x wedges (J) into the corners of the back of the unit and secure
with 8x screws (L). Tighten with a screwdriver. Attach 1x safety strap (V)
to the top of the back side of the unit as shown using 1x washer (Z) and
1x screw (W). Tighten with a screwdriver.
Insert 4x shelf plugs (I) into the unit at the desired height for the shelves
and rest the shelf panel [5] onto them. Ensure the shelves are balanced
and stable.
II
5
2
3