modway EEI-4725 User manual

EEI-4725, 4726 OTTOMAN
Customer Service 609-256-9000︱www.modway.com
Page 1 of 4
Thank you for purchasing the MODWAY OTTOMAN
Before you start, here are some helpful advice:
1. We suggest you spend a short time reading through this leaflet and then follow the simple step-by-step
instructions.
2.Owing to the size and weight of the ottoman, we recommend that it is assembled by two adults, on a carpeted
or padded area, in the room that it is intended for. Approximate assembly time: 20 minutes.
3.Please do not use any tools other than those provided or recommended in these instructions.
4.Please do not throw away any of the packaging or the instruction until you have checked all the components
and hardware and the furniture is fully assembled. Please ensure that the packaging is disposed of in a safe
and environmentally friendly way.
5.Assemble all components loosely until advised to tighten. Depending on use, it may be necessary to tighten
the components from time to time, so please save the tools that have been provided.
6.Please keep all pieces out of reach of children.
Hardware:
Components:
STEP 1:
Bolt M8x60mm x8
A.
Flat Washer x8
B.
Allen Wrench x1
C.
1. Body x1 2. Leg x4 3. Back Cushion x1 4. Round Cushion x1

EEI-4725, 4726 OTTOMAN
Customer Service 609-256-9000︱www.modway.com
Page 2 of 4
1. Please put Body (1) upside down on a carpeted or padded surface.
2. Open the Zipper strip on the bottom of the Body (1) and take out 4 pieces of Legs (2), 1 piece of
Back Cushion (3), 1 piece of Round Cushion (4) and hardware bag.
STEP 2:
1. Attach 4 pieces of Legs (2) to the Body (1) by using 8 pieces of Bolts (A) with 8 pieces of Flat Washers (B)
as shown.
3. Use Allen Wrench (C) to tighten all Bolts (A) clockwise until secure.
STEP 3:

EEI-4725, 4726 OTTOMAN
Customer Service 609-256-9000︱www.modway.com
Page 3 of 4
1. Please put Back Cushion (3) and Round Cushion (4) upside down on a carpeted or padded surface.
2. Place the Round Cushion (4) on the Back Cushion (3) as shown.
3. Please Wrap the Round Cushion (4) around the Back Cushion (3) and fix with the velcro strip on the
Back Cushion (3) and Around Cushion (4) as shown.
STEP 4:
1. Please carefully turn over the Body (1).
2. Carefully put the assembled Back Cushion (3) and Round Cushion (4) to the Body (1) as shown.
Assembly is complete. Your ottoman is ready to enjoy now