MOFLASH SIGNALLING SB150-1 Series User manual

Moash part code SB150-1-S00528-Issue 6
TONE SELECTION SHEET
PLEASE READ PRIOR TO INSTALLATION AND IN CONJUNCTION
WITH THE INSTALLATION & TECHNICAL INFORMATION BOOKLET
S00523 (SB150-1) SUPPLIED
Website: www.moash.com Email: technical@moash.co.uk
APPROVED AND
CONFORMITIES
SB150-1 Series - (Explosion Proof Sounders/Beacons)
AUDIBLE & VISUAL SIGNALLING DEVICES
Diagram 3
ITEM DESCRIPTION Max dB SW1,
SW2, SW3
Tone Frequency Tone
Description
Tone
Application
Waveform (DB)@1M
‘+/- 3dB’
Bit 123456
48 800Hz--1000Hz@50Hz Low Freq
Buzz
Buzz 102 000011
49 2400Hz--2900Hz@50Hz High Freq
Buzz
Buzz 101 100011
50 500Hz--1200Hz
@ 2.5s ↑ 0.5s
Slow
Whoop
106 010011
51 500Hz--1200Hz
@ 5.0s ↑ 0.25s
Slow
Whoop
Evacuation,
Netherlands
107 110011
52 1200Hz--500Hz
@ 1Hz
Reverse
Sweeping
Evacuation,
Germany
106 001011
53 1400Hz--1600Hz
@ 1s ↑ 0.5s ↓
Sweeping NFC 48-256 111 101011
54 Simulated bell Fast Shake Bell =100 011011
55 800Hz/660Hz Tow tone
chime
Int’l
Evacuation
Alarm
101 111011
56 800Hz/1000Hz ISO 8201
Evacuation
Int’l
Evacuation
Alarm
101 000111
57 250Hz--1200Hz
@ 3s ↑, 6s, 3s ↓
Motor
Siren-slow
rise
109 100111
58 250Hz--800Hz
@ 3s ↑, 6s, 3s ↓
Motor
Siren-slow
rise
101 010111
59 250Hz--1400Hz
@ 3s ↑, 6s, 3s ↓
Motor
Siren-slow
rise
107 110111
Tone Selection: The sounder provides 60 tones to be selected for the alarm stage 2 to 4.
Three stages of alarm tones can be preset. Select the tone 6 bit binary codes required
from the tone table and set via the three (3) DIP switches located on the Sounder PCB
(see diagram 3).
Volume Control: The sounder has a volume control to adjust the output volume of the
sounder component. To set the required output volume, adjust the potentiometer on the PCB (see
diagram 3). The potentiometer should be set to fully clockwise position if maximum output
volume is needed.
DIP Switch SW2 (Stage 3)
Potentiometer
DIP Switch SW1 (Stage 2)
DIP Switch SW3 (Stage 4)

ITEM DESCRIPTION Max dB SW1,
SW2, SW3
Tone Frequency Tone
Description
Tone
Application
Waveform (DB)@1M
‘+/- 3dB’
Bit
123456
00 0 0 0 0 0 000000
01 300Hz Continuous 95 100000
02 340Hz Continuous 100 010000
03 440Hz Continuous 101 110000
04 554Hz Continuous 107 001000
05 660Hz Continuous All-clear-,
Sweden
103 101000
06 800Hz Continuous 103 011000
07 1000Hz Continuous PFEER
Toxic Gas
103 111000
08 1200Hz Continuous 113 000100
09 2000Hz Continuous 98 100100
10 2400Hz Continuous 108 010100
11 2850Hz Continuous 94 110100
12 450Hz @ 0.625s Intermittent Australian,
AS2220
103 001100
13 544Hz @ 0.875s Intermittent 107 101100
14 660Hz @ 150ms on,
150ms o
Intermittent Swedish
Fire Alarm
101 011100
15 660Hz @ 1.8s on,
1.8s o
Intermittent Swedish
Fire Alarm
104 111100
16 745Hz @ 500ms on,
500ms o
Intermittent 103 000010
17 800Hz @ 250ms on,
250ms o
Intermittent 100 100010
18 800Hz
@ 250ms on, 1s o
Intermittent 102 010010
19 1000Hz @ 250ms on,
250ms o
Intermittent 98 110010
20 1000Hz @ 500ms on,
500ms o
Intermittent Back-up
Alarm (LF)
101 001010
21 1000Hz @ 250ms on,
1s o
Intermittent 99 101010
22 1000Hz @ 1s on,
1s o
Intermittent PFEER
Gen, Alarm
102 011010
23 2400Hz @ 250ms on,
250ms o
Intermittent 105 111010
24 2400Hz @ 500ms on,
500ms o
Intermittent 108 000110
25 2850Hz @ 1s on,
1s o
Intermittent Back-up
Alarm (HF)
93 100110
TONE SELECTION TABLE
26 2850Hz @ 150ms on,
100ms o
Intermittent Pelican
Crossing
92 010110
27 970Hz @ 500ms on/
500ms o, 1.5s o
3 Pulses ISO 8201
Low Tone
104 110110
28 2850Hz @ 500ms on/
500ms o, 1.5s o
3 Pulses ISO 8021
High Tone
93 001110
29 700Hz @ 2s on/
2s o
Intermittent Air-raid,
Sweden
107 101110
30 700Hz @ 125ms on/
125ms o
Intermittent Local
warning,
Sweden
104 011110
31 720Hz @ 0.7s on/
0.3s o
Intermittent Industrial
alarm,
Germany
106 111110
32 554Hz/440Hz
@ 500ms
Alternating Swedish
Fire Alarm
104 000001
33 554Hz/440Hz
@ 100ms/400ms
Alternating AFNOR,
NFS 32-001
104 100001
34 554Hz/440Hz
@ 1s
Alternating Turn-out,
Sweden
106 010001
35 800Hz/1000Hz
@ 125ms
Alternating Increased
Urgency
102 110001
36 2400Hz/2900Hz
@ 125ms
Alternating Security
Deterrent
101 001001
37 800Hz/1000Hz
@ 250ms
Alternating Fire Alarms 102 101001
38 800Hz/1000Hz
@ 580ms
Alternating 102 011001
39 1000Hz/2000Hz
@ 500ms
Alternating 102 111001
40 2400Hz/2900Hz
@ 250ms
Alternating Security
Alarms
103 000101
41 [email protected] Fast Whoop 106 100101
42 [email protected] Sweeping 109 010101
43 660Hz--1200Hz@1Hz Sweeping 106 110101
44 800Hz--1000Hz@1Hz Med
Sweeping
(LF)
101 001101
45 800Hz--1000Hz@7Hz Fast
Sweeping
(LF)
101 101101
46 2400Hz--2900Hz@1Hz Sweeping 103 011101
47 2400Hz--1000Hz@7Hz Fast
Sweeping
102 111101
ITEM DESCRIPTION Max dB SW1,
SW2, SW3
Tone Frequency Tone
Description
Tone
Application
Waveform (DB)@1M
‘+/- 3dB’
Bit
123456