Moldex 8000 Series User manual

REPLACEMENT CARTRIDGES1
HAZARD APPROVAL MODEL # PACKAGING
8000 SERIES FACEPIECE ASSEMBLY
DESCRIPTION PACKAGING MODEL # SIZE
FACEPIECE
Includes head strap
assembly and exhale
valve assembly.
1Facepiece/Bag
12 Bags/Case
8001
8002
8003
S
M
L
ORGANIC VAPORS
Organic Vapors.
TC-23C-1223 8100 1PR/BAG
5PRS/BOX
6BXS/CS
ACID GASES
Chlorine, Hydrogen Chloride,
Sulfur Dioxide, or Chlorine Dioxide; or
for escape only from Hydrogen Sulfide;
or Hydrogen Fluoride.
TC-23C-1224 8200 1PR/BAG
5PRS/BOX
6BXS/CS
ORGANIC VAPORS/
ACID GASES
Organic Vapors, Chlorine, Hydrogen
Chloride, Sulfur Dioxide, or Chlorine Dioxide;
or for escape only from
Hydrogen Sulfide; or Hydrogen Fluoride.
TC-23C-1225 8300 1PR/BAG
5PRS/BOX
6BXS/CS
AMMONIA/METHYLAMINE
Ammonia/Methylamine.
Use with gas-proof goggles.
TC-23C-1369 8400 1PR/BAG
5PRS/BOX
6BXS/CS
FORMALDEHYDE
Formaldehyde.
OSHA regulations require
gas-proof goggles.
TC-23C-1409 8500 1PR/BAG
5PRS/BOX
6BXS/CS
MULTI GAS/VAPOR
Organic Vapors, Ammonia, Methylamine,
Chlorine, Hydrogen Chloride, Sulfur
Dioxide, or Hydrogen Fluoride, or Chlorine
Dioxide, or Formaldehyde, or Hydrogen
Sulfide (escape only).
P100 PARTICULATES
Dusts, Fumes, Mists
Radionuclides, Radon daughters
and Asbestos-containing dusts
and mists.
TC-23C-1809
TC-84A-1443
8600
8990
1PR/BAG
5PRS/BOX
6BXS/CS
1PR/BAG
5PRS/BOX
6BXS/CS
8000 RESPIRATOR SELECTION GUIDE
1Refer to NIOSH label for approval limitations, see Instruction Manual and/or packaging.

ORGANIC VAPORS
Organic Vapors.
TC-23C-1223 8101
8102
8103
S
M
L
PAINT SPRAY/PESTICIDE
(includes 8910 N95 prefilters, 8020
retainers, 8100 cartridges) Paint, Lacquer,
and Enamel Mists, Pesticides, Organic
Vapors, and Dusts and Mists.
Waterbased Only.
Not for use against two-part isocyanate paints or oil
based particulates.
TC-84A-1337 8111N
8112N
8113N
S
M
L
MULTI GAS/VAPOR
Organic Vapors, Ammonia, Methylamine,
Chlorine, Hydrogen Chloride, Sulfur Dioxide,
or Hydrogen Fluoride, or Chlorine Dioxide,
or Formaldehyde, or Hydrogen Sulfide
(escape only).
P100 PARTICULATES
Facepiece assembly with P100 disk
#8940 and Disk/Filter Holder #8900.
TC-23C-1809
TC-84A-0117
8601
8602
8603
8941
8942
8943
S
M
L
S
M
L
PAINT SPRAY/PESTICIDE
KIT With Free Paint Bucket
18000 Series Facepiece Assembly,
5pairs 8910 N95 Prefilters, 1 8020
Filter Retainer, 1 pair SparkPlugs
8111KN
8112KN
8113KN
S
M
L
PACKAGING: 1Fully assembled respirator with cartridges and/or filters per resealable bag, 12 respirators/case.
1Refer to NIOSH label for approval limitations, see Instruction Manual and/or packaging.
8000 RESPIRATOR SELECTION GUIDE
DISK/FILTER HOLDER
with retainer ring use with 8001, 8002, 8003 facepiece
assemblies and 8910, 8970, 8755 or 8940.
DISK PIGGYBACK ADAPTER
with retainer ring use with 8000 series cartridges and 8940.
PREFILTER RETAINER
Use with 8910or 8970 and
8000 Series Cartridges.
8900
8920
8020
1PR/BAG
5PRS/BOX
6BXS/CASE
1PR/BAG
5PRS/BOX
6BXS/CASE
1PR/BAG
10 PRS/BOX
5BXS/CASE
PREFILTER RETAINER, HOLDER, AND ADAPTER
HAZARD
HAZARD APPROVAL MODEL # SIZE
MODEL # PACKAGING
ASSEMBLED RESPIRATORS WITH CARTRIDGES OR P100 DISKS1
N95 Welding Particulates Plus
Nuisance levels of OV/Ozone
Facepiece assembly w/N95 filter
#8755 and Disk/Filter Holder #8900
8757 M
TC-84A-3901
TC-84A-1337

P100 PARTICULATES
Dusts, Fumes, Mists, Radionuclides,
Radon daughters and Asbestos-
containing dusts and mists.
REPLACEMENT PARTS2
DESCRIPTION MODEL # PACKAGING
HEAD STRAP ASSEMBLY
Includes yoke, buckles
and 2 straps.
0082
4/BAG
5BGS/CASE
EXHALE VALVE ASSEMBLY
Includes holder and diaphragm.
0083
6/BAG
5BGS/CASE
8000 RESPIRATOR SELECTION GUIDE
2Use with 8001, 8002, 8003 Assembled Facepiece.
1Refer to NIOSH label for approval limitations, see Instruction Manual and/or packaging.
N95 PARTICULATE
FILTER
Use with 8020 retainer and 8000 Series
cartridges, or standalone with
8900 holder.
TC-84A-0117 8940 1PR/BAG
5PRS/BOX
6BXS/CASE
TC-84A-1343 8910 5PRS/BAG
10 BGS/CASE
R95 PARTICULATE
FILTER
Use with 8020 retainer and 8000 Series
cartridges, or standalone with
8900 holder.
TC-84A-4248 8970 5PRS/BAG
10 BGS/CASE
N95 WELDING
PARTICULATE FILTER PLUS
NUISANCE OV/OZONE
Use as standalone with
8900 holder.
TC-84A-3901 8755 1PRS/BAG
50 BGS/CASE
8000 FIT TEST PRODUCTS
PART #
8006 PROBED CARTRIDGE KIT 1PER BOX
100 WIPES PER BOX
8007 ALCOHOL WIPES
TRAINING AND INSTRUCTIONAL MATERIAL
0701
HOW TO SET UP A RESPIRATORY PROTECTION PROGRAM
According to OSHA guidelines
DESCRIPTION PACKAGING
INCLUDES: 1 8006 probed cartridge, 1 pair 8940 P100 Particulate Disk,
1pair 8900 disk holders, 1 pair 8920 disk piggyback adaptors, and
instructions. For use with TSI PortaCount.
8900 SERIES FILTERS AND DISKS1
HAZARD APPROVAL MODEL # PACKAGING

MOLDEX-METRIC, INC.
10111 W. Jefferson Blvd.
Culver City, CA 90232
800/421-0668 310/837-6500
FAX [phone]
www.moldex.com e-mail: [email protected]
Moldex is a registered trademark. U.S. Patents Pending
8000-701 REV K 8/06
RESPIRATOR TRAINING PROGRAMS
Moldex offers comprehensive training materials and programs on the use and care
of8000 series respirators to help you meet OSHA, state and local regulations.
F
FI IT TT TE ES ST TI IN NG G
Improve your respirator program with Moldex’s qualitative fit test kit and Probed
Cartridge Kit for quantitative fit testing. Make sure your worker’s respirators fit
satisfactorily. And ensure that your workers are wearing their respirators properly.
Moldex’s Fit Test Kits will help your respirator program meet OSHA requirements.
FACTORY-BACKED SUPPORT GROUP
Moldex’s factory-trained sales force is available to help you and your workers take full
advantage of the 8000 series respirator’s many safety and value features. In addition,
there are training materials available to help ensure the proper use of 8000 series
respirators.
T
TE EC CH HN NI IC CA AL LS SE ER RV VI IC CE EH HE EL LP PL LI IN NE E
Atoll-free technical service line to help answer your questions about respiratory
protection and the use of all Moldex safety products. Call 800/421-0668
ext. 550 or 310/837-6500 ext. 550.
In Canada:
Moldex-Metric, Inc.
Pacesetter Sales & Associates
20 Arthur Hall Drive
Sharon, ON L0G 1V0
Tel: [phone] Fax: [phone]
www.pacesettersales.com

IMPORTANT NOTICE TO USERS
Read Instruction Manual, included with 8000 respirator facepiece, before wearing. You are responsible to under-
stand and follow all warnings, restrictions and other information contained in the Instruction Manual. Failure to
do so may result in sickness or death.
USE AGAINST
1. Contaminants specified on NIOSH approval label or bag or cartridges or filters and in Manual.
2. Contaminants with good warning properties, i.e. smell, taste or irritation.
DO NOT USE AGAINST
1. Concentrations of contaminants which are unknown, or are immediately dangerous to life or health.
2. Concentrations of contaminants which exceed the maximum use concentration or 10 times the OSHA
Permissible Exposure Limit, whichever is lower.
3. Gases or vapors with poor warning properties or those which generate high heats of reaction, or paint sprays
containing isocyanates, or sandblasting.
4. Oil-based mists with N filters.
WARNING TO USER
1. Follow all instructions and warnings on the use of these cartridges and respirator and wear during all times
of exposure. Failure to do so will reduce respirator effectiveness, wearer protection, and may result in sickness
or death.
2. For proper use, ask your supervisor or phone [phone].
3. The user must first be trained by the employer in proper respirator use, in accordance with applicable safety
and health standards, for the contaminant and exposure level in the assigned work area.
4. The vapors, gases, dusts, mists, fumes, and other contaminants which can be dangerous to your health
include those which you cannot see, taste, or smell.
5. Check with your supervisor for the appropriate cartridges and/or filters for the contaminants
in your work area.
RESTRICTIONS:
1. This respirator does not supply oxygen and must not be used in atmospheres containing less than 19.5% oxygen.
2. Do not remain in contaminated area if any physical distress occurs, for example breathing difficulty, dizziness
or nausea.
3. Leave contaminated area and replace respirator and/or cartridge or filter if it is damaged, distorted, a proper
fit cannot be obtained, you taste, smell or become irritated by contaminants, or breathing becomes difficult.
4. Do not alter, modify, or abuse the respirator, cartridge and/or filter.
5. Store cartridges, filters and respirator in sealed bag in a clean, dry, non-contaminated area.
6. Dispose of facepiece, and/or cartridges and disks/filters, according to your employer’s policy and
local regulations.
7. Filters are required for particulates.
8. Where oil mists arepresent, either alone or in combination with solid particulates, do not use the R or P
filters for longer than one eight-hour work shift. Dispose no later than eight hours after first use. Do not exceed
10XPEL or a total of 200 mg loading per respirator, whichever is lower. It is the user’s responsibility to know the
PEL and concentration of the contaminant, the maximum workrate of the employee, and any other worksite spe-
cific information to calculate the loading of the filter. Where oil mists are present do not use N filters.
9. Where oil mists are not present, dispose of all cartridges, N, R, P filters, no later than thirty days after
first use.
10. Use cartridges, filters, and facepieces before the “use by” expiration date printed on box.
TECHNICAL SERVICE LINE
Moldex maintains a toll-free Technical Service Line to answer questions about the use of Moldex respirators,
contaminants and regulations. If you have any questions call 800/421-0668 ext. 550 or Fax [phone].