Moldex Air Series User manual

CERTIFICATION
The Moldex Air FFP-masks meet the requirements of EN 149:2001 + A1:2009 and
are CE-marked in accordance with the requirements of European
89/686/EEC. The IFA (BGIA) Germany is responsible for both type examination
10) and monitoring of production (Article 11). In addition to this the unvalved
masks of the Series 3000 AIR meet the requirements of EN 14683:2005 accor-
ding to the Medical Device Directive 93/42/EEC. The products are manufactured
in an ISO 9001:2000 certified plant.
MATERIALS
Filter Layer, Inner Shell, DuraMesh®: Polypropylene,
Ethylene-vinyl acetate (EVA)
Nose Seal, Clip: Polyethylene
Head Strap: Polyester, Lycra
WEIGHT
3100: 26 g 3150: 21 g 3200: 28 g 3250: 23 g
AREAS OF USE
(WEL = Workplace Exposure Limit)
NR (non reusable): Single use.
Comfortable and durable throughout the whole shift.
D (Dolomite clogging test): Masks have passed the Dolomite clogging test.
Better breathing resistance for longer.
Air Series – Bi-Directional Protection
UK - 03 - 2011 / 01
CHARACTERISTICS
ActivForm®
Automatically fits to the face.
No manual adjustments by the user are necessary.
DuraMesh®
Masks have a strong and durable structure.
Low breathing resistance
Thanks to the Pleated Filter Technology the inhaled breathing
resistance is reduced by more than 50% whilst maintaining filtra-
tion performance. The filter surface has been increased by 260%.
Nose seal
The flexible nose seal improves fit and provides
optimum wearing comfort.
Clip & Adjustable Strap
Easy on & off; mask can be worn around
the neck during breaks.
Bi-Directional Protection
Protects the wearer and his surrounding area
Meets the requirements of EN 149 and EN 14683.
Individually packed
Protected from dust and kept hygienic before use.
Latex-Free
Doesn‘t contain natural latex.
100% PVC-FREE
All Moldex products and packaging are
completely free from PVC.
Two sizes
For an optimal fit even for smaller faces.
Datasheet
FFP masks
Protection against Dust, Mist,
Fumes & biological substances
LATEX
FREE
FFP2 NR D · Size M/L
3100 non valved
FFP2 NR D · Size S
3150 non valved
FFP3 NR D · Size M/L
3200 non valved
FFP3 NR D · Size S
3250 non valved
+260%
S
M/L
Level WEL Hazard type
Examples
FFP2 10 x AGAINST HARMFUL WATER AND OIL BASED DUSTS
Against toxic dusts in industrial applications and airborne
biological agents of risk group 2 (e.g. pollen, bacteria).
FFP3 20 x AGAINST HARMFUL AND CANCER CAUSING WATER
AND OIL BASED DUSTS
Like FFP2 + cancer causing agents and additional protec-
tion against radioactive aerosols and airborne biological
agents of risk group 3 (e.g.. viruses) and enzymes.
www.magusintl.com

TESTING ACCORDING TO EN 149:2001 + A1:2009
Total inward leakage
Ten test subjects perform a variety of exercises. During the exercises the amount
of test aerosol that penetrates the filter, face seal and valve are sampled. The
total inward leakage of 8 out of 10 test subjects shall not exceed the following
levels:
The filter penetration after loading the filter with 120 mg paraffin oil according
to DIN EN 149:2001 + A1:2009 shall not exceed the following levels:
TESTING ACCORDING TO EN 14683:2005
Requirements
The Air masks pass the examinations of the category IIR.
BFE testing method
An aerosol of Staphylococcus aureus is drawn through the filter material. The
filter efficiency against bacteria is declared by the amount of colony building units
which go through the mask.
INSTRUCTIONS FOR USE
· The masks are available in two sizes. According to the face dimensions the
appropriate mask has to be chosen (S or M/L).
· The user has to be trained and instructed in wearing the mask.
· FFP masks do not protect against gases and vapours.
· The oxygen concentration of the ambient atmosphere should be at 19,5 % Volume.
· These respirators may not be used if the concentration type, and properties of
contaminants in the ambient atmosphere are unknown or at dangerous levels.
· Respirators should be disposed if damaged, if the breathing resistance
be comes high due to clogging.
· Never tamper with, alter or modify the respirator.
Category max. Filter penetration
FFP2 6 %
FFP3 1 %
UK - 03 - 2011 / 02
Datasheet
FFP masks
Protection against Dust, Mist,
Fumes & biological substances
Testing Type I Type IR Type II Type
IIR
Bacterial filtration efficiency
(BFE) (%)
≥ 95 ≥ 95 ≥ 98 ≥ 98
Splash resistance (mmHg) not
applicable
≥ 120 not
applicable
≥ 120
Category max. total inward leakage
FFP2 8 %
FFP3 2 %
MOLDEX-METRIC AG & Co. KG
Unit 9, Glaisdale Point
Off Glaisdale Drive, Bilborough
Nottingham. NG8 4GP
Tel.: [phone]
Fax: [phone]
www.moldex-europe.com
[email protected]
INFO
For help on selection and training please
contact us. We offer a wide range of training
packages and support material.
INSTRUCTIONS FOR FITTING
1. Pull strap to form a
large loop.
2. Place respirator on chin and
pull loop over head tight to
the neck.
3. Pull upper strap and place on
back of head.
4. Adjust strap by pulling
loop on strap.
5. During breaks unclip strap.
6. Let mask hang around
your neck.
www.magusintl.com