Monoprice MP Mini Delta V2 User manual

1
MP Mini Delta V2 3D Printer
P/N 21666
Quick Start Guide
1. Unbox the printer. Refer to the PACKAGE CONTENTS section of the User's Manual
and verify that all you received all parts and accessories.
2. Using a pair of scissors or wire cutters, remove the security straps from the printer's
Carriage. Lift the Carriage, then remove the protective carton shell.

2
3. Locate the two vertical slots on the side, then install the Filament Holder and place
the sample filament on the holder. Press down on the lever on the Filament
Extruder Gear, then feed filament into the hole until you encounter resistance.
Release the lever.
4. Plug in and power on the printer.
5. Select your desired menu language. The printer will then display the Wifi Setting
screen. If you do not want to use Wi-Fi®, touch the No option, then refer to the
User's Manual for other connectivity options. If you do want to use Wi-Fi, touch the
Yes option and follow the on-screen instructions.

3
6. Download and install the free PoloPrint Pro app from the App Store® or Google
Play™. PoloPrint Pro will allow you to control the printer using your smartphone or
tablet.

4
7. The printer will then display the Quick guide screen. Touch the Next option, then
follow the on-screen instructions to print your first model. Otherwise, touch the
Quit option to exit to the main menu screen.
Monoprice™ and all Monoprice logos are trademarks of Monoprice Inc.
Wi-Fi® and Wi-Fi Alliance® are registered trademarks of Wi-Fi Alliance.
Apple®, App Store®, and the "Download on the App Store" logo are trademarks of Apple
Inc., registered in the U.S. and other countries.
Google™, Google Play™, and the "Get It On Google Play" logo are trademarks of Google
LLC.