
“∷“THIS POSITION TURNS ON ALL THE 4 ELEMENTS. (2400W)
THE THERMOSTAT SWITCH
THIS SWITCH MOVES THE THERMOSTAT SETTINGS FROM “LOW” TO
“HIGH” AND WILL ONLY OPERATE IF POSITION “∴“ HAVE BEEN
SELECTED.
TO OPERATE: TURN THE SWITCH FROM “LOW” TO “HIGH” WHILE THE
HEATING SWITCH IS SET TO “∴” OR “∷”. (THIS GIVES THE MOST
WARMTH)
THIS TURNS OFF THE “∴” AND “∷” ELEMENTS FOR THE TIME BEING
AUTOMATICALLY UNTIL THE ROOM TEMPERATURE GOES DOWN, THEN
THEY WILL BE TURNED ON AGAIN AUTOMATICALLY UNTIL THE ROOM
WARMS UP.
REMEMBER THE FIRST TWO ELEMENTS WILL REMAIN ON UNTIL THE
HEATING SWITCH IS TURNED TO THE “OFF”. THE THERMOSTAT ONLY
FUNCTIONS WHEN EITHER THREE OR ALL ELEMENTS ARE ON.
SAFETY PRECAUTIONS
This appliance is not intended for use by persons (including children) with
reduced physical, sensory or mental capabilities, or lace of experience and
knowledge, unless they have been given supervision or instruction concerning
use of the appliance by a person responsible for their safety. Young children
should be supervised to ensure that they do not play with the appliance.
Use the appliance only for the intended purpose. The manufacturer is not
responsible for any damage caused by improper or faulty use.
Do not expose the appliance to outdoor conditions such as rain or sun
Before cleaning the appliance of carrying out any maintenance, make sure the
appliance is unplugged from the socket-outlet.
WARNING: In order to avoid overheat, do not cover the heater.
The heater must not be located immediately below a socket-outlet.
The heater must not be used if any of the glass sheaths of the heating elements are
broken.
Do not use this heater with a programmer, timer or any other device that switches