Morso 7370 User manual

DK Montering af væghængt 7370/7470
DE Installation des Wandofens 7370/7470
UK Installation of wallmounted 7370/7470
NO Montere vegghengt 7370/7470
SE Montering av vägghängd 7370/7470
FR Installation murale du 7370/7470
NL Plaatsing van de wandkachel 7370/7470
ES Instalación de la estufa 7370/7470
IT Installazione a parete della stufa 7370/7470
MORSØ JERNSTØBERI A/S . DK-7900 NYKØBING MORS
E-Mail: [e-mail] · Website: www.morsoe.com
Morsø 7370/7470

2
Montering af væghængt
Morsø 7370/7470
Vægbeslaget er leveret med 8 huller til montering
af ekspansionsbolte i muren. Minimum 4 af de 8
huller i vægbeslaget skal anvendes i forbindelse
med fastgørelsen på væggen.
Boltene skal dimensioneres, så man er sikker
på, at muren og det materiale den er udført i,
er i stand til at holde ovnen. Ovnens egenvægt
er 114 kg. Det påhviler derfor installatør/kunde
at sikre sig at væg/skorsten på forsvarlig
vis kan bære ovnen. Vi gør opmærksom på,
at elementskorstene samt murede ½ stens
skorstene uden foring ikke altid har den
nødvendige bæreevne. Er De i tvivl skal De derfor
kontakte en fagmand.
Vægbeslaget kan benyttes som
boreskabelon. Minimum afstand til brændbart
gulv er 275 mm.
Bemærk, der må ikke anvendes rawplugs af
plastik på grund af varmepåvirkningen.
En murbøsning indmures korrekt i væggen,
hvis røgafgangen ønskes bagud (se skitse) og
vægbeslaget monteres på væggen.
Efter udpakning af basisovnen tages løsdelene
ud af ovnen. Askeskuen, den nederste
røgledeplade der er udført i vermiculite, den
støbte rist og mellembund ernes.
Stråleskærmen på bagsiden af ovnen skrues
af og skal ikke anvendes på den væghængte
udgave.
Min. 200 mm
Min. 7,87"
Min. 719 mm
Min. 28,3"
Zone: Rev.: Description Date Sign.:
Revisions
Title:
Drawing no.:
Dim. without indication of margin acc. to DS/ISO 2768-1 m
1:10
Montering på væg
Morsø 7400
RSV
24.08.2017
A3
Assembly drawing
Date of print: 24-08-2017
C:\Working\7400 Fuelchamber with casted front.SLDASM
7400-175 a
Itemno.:
This drawing is Morsø Jernstøberi A/S' property and must not be sold, lended or copied without any written authorization from the company.
Material:
Weight kg:
Model no.
Drawingtype:
Location of file:
Scale:
Format:
Released:
Construction:
Min. 200 mm
Min. 7,87"
Min. 719 mm
Min. 28,3"
Zone: Rev.: Description Date Sign.:
Revisions
Title:
Drawing no.:
Dim. without indication of margin acc. to DS/ISO 2768-1 m
1:10
Montering på væg
Morsø 7400
RSV
24.08.2017
A3
Assembly drawing
Date of print: 24-08-2017
C:\Working\7400 Fuelchamber with casted front.SLDASM
7400-175 a
Itemno.:
This drawing is Morsø Jernstøberi A/S' property and must not be sold, lended or copied without any written authorization from the company.
Material:
Weight kg:
Model no.
Drawingtype:
Location of file:
Scale:
Format:
Released:
Construction:
Min. 200 mm
Min. 7,87"
Min. 719 mm
Min. 28,3"
Zone: Rev.: Description Date Sign.:
Revisions
Title:
Drawing no.:
Dim. without indication of margin acc. to DS/ISO 2768-1 m
1:10
Montering på væg
Morsø 7400
RSV
24.08.2017
A3
Assembly drawing
Date of print: 24-08-2017
C:\Working\7400 Fuelchamber with casted front.SLDASM
7400-175 a
Itemno.:
This drawing is Morsø Jernstøberi A/S' property and must not be sold, lended or copied without any written authorization from the company.
Material:
Weight kg:
Model no.
Drawingtype:
Location of file:
Scale:
Format:
Released:
Construction:

3
På bagsiden af ovnen monteres de to af
skruerne igen nederst for at lukke hullerne,
der har været anvendt til fastgørelse af
stråleskærmen.
Vinkelbeslaget monteres med de to andre
skruer der har været anvendt til fastgørelse af
stråleskærmen.
På undersiden af ovnen afmonteres 4 stk.
M6x25 skruer og skiver og to af disse bruges
til at montere bundpladen gennem de foreste
huller.
Basisovnen løftes på plads, så de to M8 skruer
under bunden af ovnen rammer ned i de ovale
huller på vægbeslaget. Ovnen fastgøres med
de medfølgende 2 stk. M6x12 skruer i toppen
og de to skiver og M8 møtrikker monteres under
bunden (se skitse). Det anbefales at være 2
personer til dette arbejde.
Min. 200 mm
Min. 7,87"
Min. 719 mm
Min. 28,3"
Zone: Rev.: Description Date Sign.:
Revisions
Title:
Drawing no.:
Dim. without indication of margin acc. to DS/ISO 2768-1 m
1:10
Montering på væg
Morsø 7400
RSV
24.08.2017
A3
Assembly drawing
Date of print: 24-08-2017
C:\Working\7400 Fuelchamber with casted front.SLDASM
7400-175 a
Itemno.:
This drawing is Morsø Jernstøberi A/S' property and must not be sold, lended or copied without any written authorization from the company.
Material:
Weight kg:
Model no.
Drawingtype:
Location of file:
Scale:
Format:
Released:
Construction:
Min. 200 mm
Min. 7,87"
Min. 719 mm
Min. 28,3"
Zone: Rev.: Description Date Sign.:
Revisions
Title:
Drawing no.:
Dim. without indication of margin acc. to DS/ISO 2768-1 m
1:10
Montering på væg
Morsø 7400
RSV
24.08.2017
A3
Assembly drawing
Date of print: 24-08-2017
C:\Working\7400 Fuelchamber with casted front.SLDASM
7400-175 a
Itemno.:
This drawing is Morsø Jernstøberi A/S' property and must not be sold, lended or copied without any written authorization from the company.
Material:
Weight kg:
Model no.
Drawingtype:
Location of file:
Scale:
Format:
Released:
Construction:

4
Installation des Wandofens
Morsø 7370/7470
Die Wandauängung wird mit 8 Löchern zur
Befestigung an der Wand mit Ankerbolzen geliefert.
Mindestens 4 der 8 Löcher in der Wandauängung
müssen verwendet werden, um den Ofen an der
Wand zu befestigen.
Die Bolzen müssen so bemessen sein, dass die
Wand und das Material, aus dem sie gemacht ist, den
Ofen halten können. Das Eigengewicht des Ofens
beträgt 114 kg. Der Einbauer/Kunde muss deshalb
sicherstellen, dass die Wand/der Schornstein den
Ofen angemessen halten kann. Beachten Sie, dass
Elementschornsteine und gemauerten Halbstein-
Schornsteine nicht immer die erforderliche
Tragfähigkeit haben. Wenn Sie sich nicht sicher
sind, sollten Sie sich deshalb an einen Fachmann
wenden.
Die Wandauängung kann als Bohrschablone
verwendet werden. Der Mindestabstand zu
brennbarem Boden beträgt 275 mm.
Beachten Sie, dass Plastikdübel aufgrund
der Einwirkungen der Hitze nicht verwendet
werden dürfen.
Eine Mauerbuchse muss korrekt in die Wand
eingebaut werden, wenn der Rauchabzug nach
hinten gewünscht wird (siehe Abbildung), und die
Wandauängung muss an der Wand angebracht
werden.
Nach dem Auspacken des Basisofens, die
losen Teile aus dem Ofen nehmen. Die
Ascheschublade, die untere Rauchleitplatte
aus Vermiculit, der gusseiserne Rost und
die Zwischenplatte müssen herausgenommen
werden.
Der Hitzeschild auf der Rückseite des Ofens
muss abgeschraubt werden und darf bei einem
Wandofen nicht verwendet werden.
Min. 200 mm
Min. 7,87"
Min. 719 mm
Min. 28,3"
Zone: Rev.: Description Date Sign.:
Revisions
Title:
Drawing no.:
Dim. without indication of margin acc. to DS/ISO 2768-1 m
1:10
Montering på væg
Morsø 7400
RSV
24.08.2017
A3
Assembly drawing
Date of print: 24-08-2017
C:\Working\7400 Fuelchamber with casted front.SLDASM
7400-175 a
Itemno.:
This drawing is Morsø Jernstøberi A/S' property and must not be sold, lended or copied without any written authorization from the company.
Material:
Weight kg:
Model no.
Drawingtype:
Location of file:
Scale:
Format:
Released:
Construction:
Min. 200 mm
Min. 7,87"
Min. 719 mm
Min. 28,3"
Zone: Rev.: Description Date Sign.:
Revisions
Title:
Drawing no.:
Dim. without indication of margin acc. to DS/ISO 2768-1 m
1:10
Montering på væg
Morsø 7400
RSV
24.08.2017
A3
Assembly drawing
Date of print: 24-08-2017
C:\Working\7400 Fuelchamber with casted front.SLDASM
7400-175 a
Itemno.:
This drawing is Morsø Jernstøberi A/S' property and must not be sold, lended or copied without any written authorization from the company.
Material:
Weight kg:
Model no.
Drawingtype:
Location of file:
Scale:
Format:
Released:
Construction:
Min. 200 mm
Min. 7,87"
Min. 719 mm
Min. 28,3"
Zone: Rev.: Description Date Sign.:
Revisions
Title:
Drawing no.:
Dim. without indication of margin acc. to DS/ISO 2768-1 m
1:10
Montering på væg
Morsø 7400
RSV
24.08.2017
A3
Assembly drawing
Date of print: 24-08-2017
C:\Working\7400 Fuelchamber with casted front.SLDASM
7400-175 a
Itemno.:
This drawing is Morsø Jernstøberi A/S' property and must not be sold, lended or copied without any written authorization from the company.
Material:
Weight kg:
Model no.
Drawingtype:
Location of file:
Scale:
Format:
Released:
Construction:

5
Auf der Rückseite des Ofens werden die
beiden Schrauben unten wieder eingedreht,
um die Löcher zu schließen, mit denen das
Hitzeschild befestigt war.
Der Winkelbeschlag wird den beiden anderen
Schrauben angebracht, mit denen das
Hitzeschild befestigt war.
Auf der Unterseite des Ofens werden vier
M6x25-Schrauben und Scheiben abgebaut
und mit zweien davon wird die Bodenplatte
durch die beiden vordere Löcher wieder
montiert.
Der Basisofen wird an seinen Platz gehoben, so
dass er auf dem Boden der Wandauängung
zu sitzen kommt. Der Ofen wird mit den
mitgelieferten beiden M6x12-Schrauben oben
und den anderen herausgedrehten M6x25-
Schrauben und Scheiben unten wieder montiert.
(siehe Abbildung). Wir empfehlen, diese Arbeiten
mit zwei Personen auszuführen.
Min. 200 mm
Min. 7,87"
Min. 719 mm
Min. 28,3"
Zone: Rev.: Description Date Sign.:
Revisions
Title:
Drawing no.:
Dim. without indication of margin acc. to DS/ISO 2768-1 m
1:10
Montering på væg
Morsø 7400
RSV
24.08.2017
A3
Assembly drawing
Date of print: 24-08-2017
C:\Working\7400 Fuelchamber with casted front.SLDASM
7400-175 a
Itemno.:
This drawing is Morsø Jernstøberi A/S' property and must not be sold, lended or copied without any written authorization from the company.
Material:
Weight kg:
Model no.
Drawingtype:
Location of file:
Scale:
Format:
Released:
Construction:
Min. 200 mm
Min. 7,87"
Min. 719 mm
Min. 28,3"
Zone: Rev.: Description Date Sign.:
Revisions
Title:
Drawing no.:
Dim. without indication of margin acc. to DS/ISO 2768-1 m
1:10
Montering på væg
Morsø 7400
RSV
24.08.2017
A3
Assembly drawing
Date of print: 24-08-2017
C:\Working\7400 Fuelchamber with casted front.SLDASM
7400-175 a
Itemno.:
This drawing is Morsø Jernstøberi A/S' property and must not be sold, lended or copied without any written authorization from the company.
Material:
Weight kg:
Model no.
Drawingtype:
Location of file:
Scale:
Format:
Released:
Construction:

6
Installation of wall-hung
Morsø 7370/7470
The wall mounting is supplied with 8 holes for
xing to the wall with expanding bolts. A min-
imum of 4 of the 8 holes in the wall mounting
must be used to x the oven to the wall.
The bolts must be sized to ensure that the wall
and the material it is made of are capable of
supporting the oven. The self weight of the oven
is 114 kg. The installer/ client must therefore
ensure that the wall/ chimney can support the
oven in an appropriate manner. Note that unit
chimneys and unlined ½ brick chimneys do not
always have the necessary load-bearing capac-
ity. If you are in any doubt, you should therefore
contact a qualied person.
The wall mounting may be used as a drilling
template. The minimum clearance to a amma-
ble oor is 275 mm.
Note that plastic wall plugs must not be
used because of the eects of heat.
A wall bushing must be built in correctly to the
wall if a rear smoke outlet is wanted (see sketch)
and the wall mounting must be tted to the wall.
After unpacking the basic oven, remove the
loose parts of the oven. The ash drawer, the
lower smoke bae made of vermiculite, the
cast grate and the intermediate base should be
removed.
The heat screen on the rear of the oven must
be screwed o and must not be used with the
wall-hung version.
Min. 200 mm
Min. 7,87"
Min. 719 mm
Min. 28,3"
Zone: Rev.: Description Date Sign.:
Revisions
Title:
Drawing no.:
Dim. without indication of margin acc. to DS/ISO 2768-1 m
1:10
Montering på væg
Morsø 7400
RSV
24.08.2017
A3
Assembly drawing
Date of print: 24-08-2017
C:\Working\7400 Fuelchamber with casted front.SLDASM
7400-175 a
Itemno.:
This drawing is Morsø Jernstøberi A/S' property and must not be sold, lended or copied without any written authorization from the company.
Material:
Weight kg:
Model no.
Drawingtype:
Location of file:
Scale:
Format:
Released:
Construction:
Min. 200 mm
Min. 7,87"
Min. 719 mm
Min. 28,3"
Zone: Rev.: Description Date Sign.:
Revisions
Title:
Drawing no.:
Dim. without indication of margin acc. to DS/ISO 2768-1 m
1:10
Montering på væg
Morsø 7400
RSV
24.08.2017
A3
Assembly drawing
Date of print: 24-08-2017
C:\Working\7400 Fuelchamber with casted front.SLDASM
7400-175 a
Itemno.:
This drawing is Morsø Jernstøberi A/S' property and must not be sold, lended or copied without any written authorization from the company.
Material:
Weight kg:
Model no.
Drawingtype:
Location of file:
Scale:
Format:
Released:
Construction:
Min. 200 mm
Min. 7,87"
Min. 719 mm
Min. 28,3"
Zone: Rev.: Description Date Sign.:
Revisions
Title:
Drawing no.:
Dim. without indication of margin acc. to DS/ISO 2768-1 m
1:10
Montering på væg
Morsø 7400
RSV
24.08.2017
A3
Assembly drawing
Date of print: 24-08-2017
C:\Working\7400 Fuelchamber with casted front.SLDASM
7400-175 a
Itemno.:
This drawing is Morsø Jernstøberi A/S' property and must not be sold, lended or copied without any written authorization from the company.
Material:
Weight kg:
Model no.
Drawingtype:
Location of file:
Scale:
Format:
Released:
Construction:

7
On the rear of the stove, re-t the two screws
at the bottom to seal the holes that were used
to x the heat screen.
Install the angle xing using the two other
screws that were used to x the heat screen.
Remove 4 no. M6x25 screws and washers, and
use two of these to x the baseplate through
the frontmost holes.
Lift the stove body into place so that the 2 x M8
screws under the base of the stove line up with
the oval holes on the wall bracket.
The stove is secured at the top with the enclosed
2 x M6x12 screws. Use the 2 x M8 and washers to
x the base of the stove to the wall bracket.
(see sketch). We recommended that 2 persons
should carry out this work.
Min. 200 mm
Min. 7,87"
Min. 719 mm
Min. 28,3"
Zone: Rev.: Description Date Sign.:
Revisions
Title:
Drawing no.:
Dim. without indication of margin acc. to DS/ISO 2768-1 m
1:10
Montering på væg
Morsø 7400
RSV
24.08.2017
A3
Assembly drawing
Date of print: 24-08-2017
C:\Working\7400 Fuelchamber with casted front.SLDASM
7400-175 a
Itemno.:
This drawing is Morsø Jernstøberi A/S' property and must not be sold, lended or copied without any written authorization from the company.
Material:
Weight kg:
Model no.
Drawingtype:
Location of file:
Scale:
Format:
Released:
Construction:
Min. 200 mm
Min. 7,87"
Min. 719 mm
Min. 28,3"
Zone: Rev.: Description Date Sign.:
Revisions
Title:
Drawing no.:
Dim. without indication of margin acc. to DS/ISO 2768-1 m
1:10
Montering på væg
Morsø 7400
RSV
24.08.2017
A3
Assembly drawing
Date of print: 24-08-2017
C:\Working\7400 Fuelchamber with casted front.SLDASM
7400-175 a
Itemno.:
This drawing is Morsø Jernstøberi A/S' property and must not be sold, lended or copied without any written authorization from the company.
Material:
Weight kg:
Model no.
Drawingtype:
Location of file:
Scale:
Format:
Released:
Construction:

8
Montere vegghengt
Morsø 7370/7470
Veggbeslaget leveres med 8 hull til montering
av ekspansjonsskruer i muren. Minst 4 av de 8
hullene i veggbeslaget skal brukes i forbin-
delse med festing på veggen.
Skruene skal dimensjoneres slik at man er sikker
på at muren og materialet den er laget av er i stand
til å holde ovnen. Ovnens egenvekt er 114 kg. Det
er derfor installatørens/kundens ansvar å sikre at
veggen/pipa kan bære ovnen på forsvarlig måte. Vi
gjør oppmerksom på at elementpiper samt murte
halvsteinspiper uten fôring ikke alltid har den nød-
vendige bæreevnen. Ta kontakt med en fagperson
dersom du er i tvil.
Veggbeslaget kan benyttes som boresjablong.
Minimumsavstand til brennbart gulv er 275 mm.
Vær oppmerksom på at det ikke må brukes
rawplugger av plast på grunn av varmeut-
viklingen.
En murbøssing skal mures korrekt inn i veggen
dersom røykutløpet ønskes på baksiden (se teg-
ningen) og veggbeslaget monteres på veggen.
Ta ut de løse delene fra ovnen etter at basisovnen
er pakket ut. Fjern askeskuen, den nederste
røykledeplaten som er laget av vermikulitt, den
støpte risten samt mellomplaten.
Stråleskjermen på baksiden av ovnen skal skrus
av og ikke brukes på den veggmonterte utgaven.
Min. 200 mm
Min. 7,87"
Min. 719 mm
Min. 28,3"
Zone: Rev.: Description Date Sign.:
Revisions
Title:
Drawing no.:
Dim. without indication of margin acc. to DS/ISO 2768-1 m
1:10
Montering på væg
Morsø 7400
RSV
24.08.2017
A3
Assembly drawing
Date of print: 24-08-2017
C:\Working\7400 Fuelchamber with casted front.SLDASM
7400-175 a
Itemno.:
This drawing is Morsø Jernstøberi A/S' property and must not be sold, lended or copied without any written authorization from the company.
Material:
Weight kg:
Model no.
Drawingtype:
Location of file:
Scale:
Format:
Released:
Construction:
Min. 200 mm
Min. 7,87"
Min. 719 mm
Min. 28,3"
Zone: Rev.: Description Date Sign.:
Revisions
Title:
Drawing no.:
Dim. without indication of margin acc. to DS/ISO 2768-1 m
1:10
Montering på væg
Morsø 7400
RSV
24.08.2017
A3
Assembly drawing
Date of print: 24-08-2017
C:\Working\7400 Fuelchamber with casted front.SLDASM
7400-175 a
Itemno.:
This drawing is Morsø Jernstøberi A/S' property and must not be sold, lended or copied without any written authorization from the company.
Material:
Weight kg:
Model no.
Drawingtype:
Location of file:
Scale:
Format:
Released:
Construction:
Min. 200 mm
Min. 7,87"
Min. 719 mm
Min. 28,3"
Zone: Rev.: Description Date Sign.:
Revisions
Title:
Drawing no.:
Dim. without indication of margin acc. to DS/ISO 2768-1 m
1:10
Montering på væg
Morsø 7400
RSV
24.08.2017
A3
Assembly drawing
Date of print: 24-08-2017
C:\Working\7400 Fuelchamber with casted front.SLDASM
7400-175 a
Itemno.:
This drawing is Morsø Jernstøberi A/S' property and must not be sold, lended or copied without any written authorization from the company.
Material:
Weight kg:
Model no.
Drawingtype:
Location of file:
Scale:
Format:
Released:
Construction:

9
På baksiden av ovnen monteres de to skruene
igjen nederst for å lukke hullene som har vært
brukt til å feste stråleskjermen.
Vinkelbeslaget monteres med de to andre
skruene som har vært brukt til å feste stråle-
skjermen.
På undersiden av ovnen demonteres re stk.
M6x25 skruer og skiver, og to av disse brukes
for å montere bunnplatene gjennom de fremre
hullene.
Basisovnen løftes på plass, slik at de to M8-skru-
ene under bunnen på ovnen passer overens
med de to ovale hullene på veggbeslaget. Ovnen
festes med de medfølgende to stk. M6x12 skruer
i toppen og de to M8x25-skruene med skiver i
bunnen (se tegningen). Det anbefales at 2 perso-
ner utfører dette arbeidet.
Min. 200 mm
Min. 7,87"
Min. 719 mm
Min. 28,3"
Zone: Rev.: Description Date Sign.:
Revisions
Title:
Drawing no.:
Dim. without indication of margin acc. to DS/ISO 2768-1 m
1:10
Montering på væg
Morsø 7400
RSV
24.08.2017
A3
Assembly drawing
Date of print: 24-08-2017
C:\Working\7400 Fuelchamber with casted front.SLDASM
7400-175 a
Itemno.:
This drawing is Morsø Jernstøberi A/S' property and must not be sold, lended or copied without any written authorization from the company.
Material:
Weight kg:
Model no.
Drawingtype:
Location of file:
Scale:
Format:
Released:
Construction:
Min. 200 mm
Min. 7,87"
Min. 719 mm
Min. 28,3"
Zone: Rev.: Description Date Sign.:
Revisions
Title:
Drawing no.:
Dim. without indication of margin acc. to DS/ISO 2768-1 m
1:10
Montering på væg
Morsø 7400
RSV
24.08.2017
A3
Assembly drawing
Date of print: 24-08-2017
C:\Working\7400 Fuelchamber with casted front.SLDASM
7400-175 a
Itemno.:
This drawing is Morsø Jernstøberi A/S' property and must not be sold, lended or copied without any written authorization from the company.
Material:
Weight kg:
Model no.
Drawingtype:
Location of file:
Scale:
Format:
Released:
Construction:

10
Montering av vägghängd
Morsø 7370/7470
Väggfästet levereras med åtta hål för montering
av expanderskruvar i väggen. Minst fyra av de åtta
hålen i väggen måste användas för väggmontering.
Bultarna måste dimensioneras så att du kan vara
säker på att väggen och materialet som den är
gjord av kan hålla kaminen. Kaminen väger 114
kg. Det är därför installatörens/kundens ansvar
att säkerställa att väggen/skorstenen kan bära
kaminen. Observera att elementskorstenar och
murade halvstenskorstenar utan foder inte alltid
har den bärförmåga som krävs. Om du är osäker
bör du kontakta en fackman.
Väggfästet kan användas som borrmall. Minsta
avstånd till brännbart golv är 275 mm.
Observera att man inte får använda skruv-
pluggar av plast på grund av värmepåver-
kan.
Mura in en väggenomföring ordentligt i väggen
om du vill ha rökkanalen bakåt (se skiss) och
montera väggfästet på väggen.
Ta ut de lösa delarna ur kaminen när du packat
upp baskaminen. Avlägsna asklådan, den nedre
baeln som är tillverkad av vermikulit, det
gjutna gallret och mellanbotten.
Skruva av strålskärmen på baksidan av kami-
nen eftersom den inte ska användas på den
väggmonterade versionen.
Min. 200 mm
Min. 7,87"
Min. 719 mm
Min. 28,3"
Zone: Rev.: Description Date Sign.:
Revisions
Title:
Drawing no.:
Dim. without indication of margin acc. to DS/ISO 2768-1 m
1:10
Montering på væg
Morsø 7400
RSV
24.08.2017
A3
Assembly drawing
Date of print: 24-08-2017
C:\Working\7400 Fuelchamber with casted front.SLDASM
7400-175 a
Itemno.:
This drawing is Morsø Jernstøberi A/S' property and must not be sold, lended or copied without any written authorization from the company.
Material:
Weight kg:
Model no.
Drawingtype:
Location of file:
Scale:
Format:
Released:
Construction:
Min. 200 mm
Min. 7,87"
Min. 719 mm
Min. 28,3"
Zone: Rev.: Description Date Sign.:
Revisions
Title:
Drawing no.:
Dim. without indication of margin acc. to DS/ISO 2768-1 m
1:10
Montering på væg
Morsø 7400
RSV
24.08.2017
A3
Assembly drawing
Date of print: 24-08-2017
C:\Working\7400 Fuelchamber with casted front.SLDASM
7400-175 a
Itemno.:
This drawing is Morsø Jernstøberi A/S' property and must not be sold, lended or copied without any written authorization from the company.
Material:
Weight kg:
Model no.
Drawingtype:
Location of file:
Scale:
Format:
Released:
Construction:
Min. 200 mm
Min. 7,87"
Min. 719 mm
Min. 28,3"
Zone: Rev.: Description Date Sign.:
Revisions
Title:
Drawing no.:
Dim. without indication of margin acc. to DS/ISO 2768-1 m
1:10
Montering på væg
Morsø 7400
RSV
24.08.2017
A3
Assembly drawing
Date of print: 24-08-2017
C:\Working\7400 Fuelchamber with casted front.SLDASM
7400-175 a
Itemno.:
This drawing is Morsø Jernstøberi A/S' property and must not be sold, lended or copied without any written authorization from the company.
Material:
Weight kg:
Model no.
Drawingtype:
Location of file:
Scale:
Format:
Released:
Construction:

11
På baksidan av kaminen monteras två av skru-
varna igen längst ner för att täppa till hålen
som har använts för att fästa strålskärmen.
Vinkelbeslaget monteras med de två andra
skruvarna som har använts för att fästa strål-
skärmen.
Ta bort 4 st. M6x25 skruvar och brickor på
undersidan av kaminen och använd två av
dessa för att montera bottenplattan genom de
främre hålen.
Lyft baskaminen på plats så att de två M8-skru-
varna under kaminen passar in i de ovala hålen
på väggfästet. Sätt fast kaminen med de två
medföljande M6x12-skruvarna ovanpå och de
två brickorna och M8-muttrarna under (se skiss).
Det rekommenderas att man är två personer för
detta arbete.
Min. 200 mm
Min. 7,87"
Min. 719 mm
Min. 28,3"
Zone: Rev.: Description Date Sign.:
Revisions
Title:
Drawing no.:
Dim. without indication of margin acc. to DS/ISO 2768-1 m
1:10
Montering på væg
Morsø 7400
RSV
24.08.2017
A3
Assembly drawing
Date of print: 24-08-2017
C:\Working\7400 Fuelchamber with casted front.SLDASM
7400-175 a
Itemno.:
This drawing is Morsø Jernstøberi A/S' property and must not be sold, lended or copied without any written authorization from the company.
Material:
Weight kg:
Model no.
Drawingtype:
Location of file:
Scale:
Format:
Released:
Construction:
Min. 200 mm
Min. 7,87"
Min. 719 mm
Min. 28,3"
Zone: Rev.: Description Date Sign.:
Revisions
Title:
Drawing no.:
Dim. without indication of margin acc. to DS/ISO 2768-1 m
1:10
Montering på væg
Morsø 7400
RSV
24.08.2017
A3
Assembly drawing
Date of print: 24-08-2017
C:\Working\7400 Fuelchamber with casted front.SLDASM
7400-175 a
Itemno.:
This drawing is Morsø Jernstøberi A/S' property and must not be sold, lended or copied without any written authorization from the company.
Material:
Weight kg:
Model no.
Drawingtype:
Location of file:
Scale:
Format:
Released:
Construction:

12
Installation murale
Morsø 7370/7470
Des orices dans la structure de xation murale
permettent de monter les boulons expandeurs à
visser dans le mur. Au minimum quatre des huit
orices doivent être utilisés pour xer le poêle
sur le mur.
La taille des boulons et le matériau du mur
doivent pouvoir supporter le poids du poêle.
À vide, le poêle pèse 114 kg. Par conséquent
l’installateur ou le client doit vérier que le mur/
cheminée est capable de porter le poids du
poêle. Veuillez tenir compte du fait que certains
systèmes de cheminée et des cheminées en
demi-briques sans doublure n’ont pas la capacité
porteuse nécessaire pour ce type de montage. En
cas de doute, consultez un professionnel.
La structure de xation murale peut être
utilisée comme patron pour marquer la position
des orices à percer dans le mur. La distance
minimale entre le poêle et un sol combustible est
de 275 mm.
N’utilisez pas de chevilles en plastique, car
elles ne résisteraient pas à la chaleur du
poêle.
Une traversée murale appropriée doit être
construite dans le mur si l’évacuation des fumées
se fait par l’arrière du poêle (voir schéma) et la
structure de xation murale doit être correcte-
ment xée au mur.
Après avoir déballé le poêle, retirez les éléments
séparés. Sortez le tiroir à cendres, le déecteur
inférieur en vermiculite, la grille en fonte et la base
intermédiaire.
L’écran thermique doit être dévissé de l’arrière
du poêle et ne doit pas être utilisé avec une
installation murale.
Min. 200 mm
Min. 7,87"
Min. 719 mm
Min. 28,3"
Zone: Rev.: Description Date Sign.:
Revisions
Title:
Drawing no.:
Dim. without indication of margin acc. to DS/ISO 2768-1 m
1:10
Montering på væg
Morsø 7400
RSV
24.08.2017
A3
Assembly drawing
Date of print: 24-08-2017
C:\Working\7400 Fuelchamber with casted front.SLDASM
7400-175 a
Itemno.:
This drawing is Morsø Jernstøberi A/S' property and must not be sold, lended or copied without any written authorization from the company.
Material:
Weight kg:
Model no.
Drawingtype:
Location of file:
Scale:
Format:
Released:
Construction:
Min. 200 mm
Min. 7,87"
Min. 719 mm
Min. 28,3"
Zone: Rev.: Description Date Sign.:
Revisions
Title:
Drawing no.:
Dim. without indication of margin acc. to DS/ISO 2768-1 m
1:10
Montering på væg
Morsø 7400
RSV
24.08.2017
A3
Assembly drawing
Date of print: 24-08-2017
C:\Working\7400 Fuelchamber with casted front.SLDASM
7400-175 a
Itemno.:
This drawing is Morsø Jernstøberi A/S' property and must not be sold, lended or copied without any written authorization from the company.
Material:
Weight kg:
Model no.
Drawingtype:
Location of file:
Scale:
Format:
Released:
Construction:
Min. 200 mm
Min. 7,87"
Min. 719 mm
Min. 28,3"
Zone: Rev.: Description Date Sign.:
Revisions
Title:
Drawing no.:
Dim. without indication of margin acc. to DS/ISO 2768-1 m
1:10
Montering på væg
Morsø 7400
RSV
24.08.2017
A3
Assembly drawing
Date of print: 24-08-2017
C:\Working\7400 Fuelchamber with casted front.SLDASM
7400-175 a
Itemno.:
This drawing is Morsø Jernstøberi A/S' property and must not be sold, lended or copied without any written authorization from the company.
Material:
Weight kg:
Model no.
Drawingtype:
Location of file:
Scale:
Format:
Released:
Construction:

13
Sur l’arrière du poêle, remettez en place les
deux vis, en bas, an de reboucher les orices
utilisés pour xer l’écran thermique.
Mettez en place l’équerre de xation à l’aide
des deux autres vis utilisées pour xer l’écran
thermique.
Retirez les 4 vis n° M6x25 et les rondelles, et
utilisez deux de celles-ci pour xer la plaque de
base dans les orices situés les plus à l’avant.
Installez le poêle en le soulevant, de telle sorte
que les deux vis M8 situées en-dessous du poêle
viennent s’intégrer dans les deux orices ovales
de la structure de xation murale.
Pour xer le poêle, vissez en haut les deux vis
M6x12 fournies, et installez en-dessous les deux
rondelles et les écrous M8 (voir schéma). L’instal-
lation doit être réalisée par deux personnes.
Min. 200 mm
Min. 7,87"
Min. 719 mm
Min. 28,3"
Zone: Rev.: Description Date Sign.:
Revisions
Title:
Drawing no.:
Dim. without indication of margin acc. to DS/ISO 2768-1 m
1:10
Montering på væg
Morsø 7400
RSV
24.08.2017
A3
Assembly drawing
Date of print: 24-08-2017
C:\Working\7400 Fuelchamber with casted front.SLDASM
7400-175 a
Itemno.:
This drawing is Morsø Jernstøberi A/S' property and must not be sold, lended or copied without any written authorization from the company.
Material:
Weight kg:
Model no.
Drawingtype:
Location of file:
Scale:
Format:
Released:
Construction:
Min. 200 mm
Min. 7,87"
Min. 719 mm
Min. 28,3"
Zone: Rev.: Description Date Sign.:
Revisions
Title:
Drawing no.:
Dim. without indication of margin acc. to DS/ISO 2768-1 m
1:10
Montering på væg
Morsø 7400
RSV
24.08.2017
A3
Assembly drawing
Date of print: 24-08-2017
C:\Working\7400 Fuelchamber with casted front.SLDASM
7400-175 a
Itemno.:
This drawing is Morsø Jernstøberi A/S' property and must not be sold, lended or copied without any written authorization from the company.
Material:
Weight kg:
Model no.
Drawingtype:
Location of file:
Scale:
Format:
Released:
Construction:

14
Plaatsing van wandkachel
Morsø 7370/7470
De wandkachel is voorzien van 8 gaten voor
wandbevestiging met ankerbouten. U moet ten
minste 4 van deze 8 gaten gebruiken om de
kachel tegen de wand te bevestigen.
Zorg ervoor dat de ankerbouten geschikt zijn
voor de wand en het materiaal waaruit hij is
gemaakt, zodat ze de kachel kunnen dragen. Het
eigen gewicht van de kachel bedraagt 114 kg.
De installateur / klant moet garanderen dat de
wand / schoorsteen de kachel veilig kan dragen.
Merk op dat schoorstenen opgetrokken in blo-
kelementen en niet-bepleisterde, gedeeltelijk in
baksteen opgetrokken schoorstenen niet altijd
voldoende draagkracht hebben. Raadpleeg
daarom bij twijfel een vakman.
Het wandmontageframe kan worden gebruikt
als boorsjabloon. De minimale afstand tot een
brandbare ondergrond bedraagt 275 mm.
Gebruik geen wandpluggen omwille van de
eecten door de warmte.
Bouw wandbuizen correct in indien u de
rookuitlaat aan de achterzijde gebruikt (zie
tekening). Bevestig het wandmontageframe
tegen de wand.
Verwijder, na het uitpakken van de eigenlijke
kachel, de losse onderdelen. De aslade, het vermi-
culieten rookschot, het gietijzeren rooster en de
tussenbasis moeten worden verwijderd.
Het hittescherm aan de achterzijde van de
kachel moet worden losgeschroefd. Gebruik
dit niet bij wandmontage.
Min. 200 mm
Min. 7,87"
Min. 719 mm
Min. 28,3"
Zone: Rev.: Description Date Sign.:
Revisions
Title:
Drawing no.:
Dim. without indication of margin acc. to DS/ISO 2768-1 m
1:10
Montering på væg
Morsø 7400
RSV
24.08.2017
A3
Assembly drawing
Date of print: 24-08-2017
C:\Working\7400 Fuelchamber with casted front.SLDASM
7400-175 a
Itemno.:
This drawing is Morsø Jernstøberi A/S' property and must not be sold, lended or copied without any written authorization from the company.
Material:
Weight kg:
Model no.
Drawingtype:
Location of file:
Scale:
Format:
Released:
Construction:
Min. 200 mm
Min. 7,87"
Min. 719 mm
Min. 28,3"
Zone: Rev.: Description Date Sign.:
Revisions
Title:
Drawing no.:
Dim. without indication of margin acc. to DS/ISO 2768-1 m
1:10
Montering på væg
Morsø 7400
RSV
24.08.2017
A3
Assembly drawing
Date of print: 24-08-2017
C:\Working\7400 Fuelchamber with casted front.SLDASM
7400-175 a
Itemno.:
This drawing is Morsø Jernstøberi A/S' property and must not be sold, lended or copied without any written authorization from the company.
Material:
Weight kg:
Model no.
Drawingtype:
Location of file:
Scale:
Format:
Released:
Construction:
Min. 200 mm
Min. 7,87"
Min. 719 mm
Min. 28,3"
Zone: Rev.: Description Date Sign.:
Revisions
Title:
Drawing no.:
Dim. without indication of margin acc. to DS/ISO 2768-1 m
1:10
Montering på væg
Morsø 7400
RSV
24.08.2017
A3
Assembly drawing
Date of print: 24-08-2017
C:\Working\7400 Fuelchamber with casted front.SLDASM
7400-175 a
Itemno.:
This drawing is Morsø Jernstøberi A/S' property and must not be sold, lended or copied without any written authorization from the company.
Material:
Weight kg:
Model no.
Drawingtype:
Location of file:
Scale:
Format:
Released:
Construction:

15
Op de achterkant van de kachel plaatst u de
twee schroeven onderaan om de gaten dicht
te maken die werden gebruikt om het hitte-
scherm te bevestigen.
Plaats de hoekbevestiging met behulp van de
twee andere schroeven die werden gebruikt
om het hittescherm te bevestigen.
Verwijder 4 M6x25-schroeven en klemringen
en gebruik twee ervan om de basisplaat te
bevestigen. Gebruik de openingen het verste
voorste.
De basiskachel wordt dan in de juiste positie
gebracht, zodat de twee M8-schroeven
onderaan de kachel in de ovale openingen van
het wandbeslag terechtkomen. Monteer de
kachel met de twee M6x12-schroeven die zijn
bijgevoegd aan de bovenzijde en monteer de
twee M8-moeren en klemringen onderaan
de kachel (zie tekening). We raden aan dat 2
personen dit werk uitvoeren.
Min. 200 mm
Min. 7,87"
Min. 719 mm
Min. 28,3"
Zone: Rev.: Description Date Sign.:
Revisions
Title:
Drawing no.:
Dim. without indication of margin acc. to DS/ISO 2768-1 m
1:10
Montering på væg
Morsø 7400
RSV
24.08.2017
A3
Assembly drawing
Date of print: 24-08-2017
C:\Working\7400 Fuelchamber with casted front.SLDASM
7400-175 a
Itemno.:
This drawing is Morsø Jernstøberi A/S' property and must not be sold, lended or copied without any written authorization from the company.
Material:
Weight kg:
Model no.
Drawingtype:
Location of file:
Scale:
Format:
Released:
Construction:
Min. 200 mm
Min. 7,87"
Min. 719 mm
Min. 28,3"
Zone: Rev.: Description Date Sign.:
Revisions
Title:
Drawing no.:
Dim. without indication of margin acc. to DS/ISO 2768-1 m
1:10
Montering på væg
Morsø 7400
RSV
24.08.2017
A3
Assembly drawing
Date of print: 24-08-2017
C:\Working\7400 Fuelchamber with casted front.SLDASM
7400-175 a
Itemno.:
This drawing is Morsø Jernstøberi A/S' property and must not be sold, lended or copied without any written authorization from the company.
Material:
Weight kg:
Model no.
Drawingtype:
Location of file:
Scale:
Format:
Released:
Construction:

16
Instalación de la estufa
Morsø 7370/7470 de pared
El soporte de montaje en pared dispone de 8
oricios para su colocación mediante pernos
de expansión. Para poder instalar la estufa en la
pared es necesario utilizar como mínimo 4 de los
8 oricios del soporte.
Los pernos deben tener la medida adecuada
para asegurarse de que la pared y el material
con el que está hecha puedan soportar la estufa.
La estufa pesa 114 kg. El instalador/cliente debe
asegurarse por tanto de que la pared/chimenea
pueden sustentar la estufa de forma apropiada.
Téngase en cuenta que las chimeneas compactas
y las chimeneas revestidas de semi ladrillos no
tienen siempre la suciente capacidad de susten-
tación de cargas. Si tiene alguna duda, póngase en
contacto con una persona cualicada.
El bastidor de montaje en pared se puede utili-
zar como plantilla de taladrado. La separación
mínima a un suelo inamable es 275 mm.
Tenga en cuenta que no se deben utilizar ta-
cos de plástico debido a los efectos del calor.
Si se va a utilizar una salida de humos trasera,
se debe construir un pasamuros apropiado
en la pared (véase el diagrama); el soporte de
montaje se instala en la pared.
Después de desembalar la estufa básica, retire
las piezas que se entregan sueltas. Se debe
retirar el cajón de ceniza, el deector de humos
inferior fabricado de vermiculita, la parrilla de
hierro fundido y la base intermedia.
Destornille la pantalla térmica de la parte
posterior de la estufa; no se debe utilizar con el
modelo de instalación en pared.
Min. 200 mm
Min. 7,87"
Min. 719 mm
Min. 28,3"
Zone: Rev.: Description Date Sign.:
Revisions
Title:
Drawing no.:
Dim. without indication of margin acc. to DS/ISO 2768-1 m
1:10
Montering på væg
Morsø 7400
RSV
24.08.2017
A3
Assembly drawing
Date of print: 24-08-2017
C:\Working\7400 Fuelchamber with casted front.SLDASM
7400-175 a
Itemno.:
This drawing is Morsø Jernstøberi A/S' property and must not be sold, lended or copied without any written authorization from the company.
Material:
Weight kg:
Model no.
Drawingtype:
Location of file:
Scale:
Format:
Released:
Construction:
Min. 200 mm
Min. 7,87"
Min. 719 mm
Min. 28,3"
Zone: Rev.: Description Date Sign.:
Revisions
Title:
Drawing no.:
Dim. without indication of margin acc. to DS/ISO 2768-1 m
1:10
Montering på væg
Morsø 7400
RSV
24.08.2017
A3
Assembly drawing
Date of print: 24-08-2017
C:\Working\7400 Fuelchamber with casted front.SLDASM
7400-175 a
Itemno.:
This drawing is Morsø Jernstøberi A/S' property and must not be sold, lended or copied without any written authorization from the company.
Material:
Weight kg:
Model no.
Drawingtype:
Location of file:
Scale:
Format:
Released:
Construction:
Min. 200 mm
Min. 7,87"
Min. 719 mm
Min. 28,3"
Zone: Rev.: Description Date Sign.:
Revisions
Title:
Drawing no.:
Dim. without indication of margin acc. to DS/ISO 2768-1 m
1:10
Montering på væg
Morsø 7400
RSV
24.08.2017
A3
Assembly drawing
Date of print: 24-08-2017
C:\Working\7400 Fuelchamber with casted front.SLDASM
7400-175 a
Itemno.:
This drawing is Morsø Jernstøberi A/S' property and must not be sold, lended or copied without any written authorization from the company.
Material:
Weight kg:
Model no.
Drawingtype:
Location of file:
Scale:
Format:
Released:
Construction:

17
En la parte inferior trasera de la estufa,
coloque de nuevo los dos tornillos para sellar
los oricios utilizados para instalar la pantalla
térmica.
Instale la jación angular utilizando los otros
dos tornillos que se usaron para instalar la
pantalla térmica.
Quite 4 tornillos M6x25 y arandelas y utilice
dos de ellos para instalar la placa base a través
de los oricios más frontales.
Levante la estufa básica hasta colocarla en su sitio,
de modo que los dos tornillos M8 de la base de
la estufa queden encajados en los dos oricios
ovalados del soporte de montaje en pared. Realice
el montaje de la estufa colocando los dos tornillos
M6x12 suministrados en la parte superior y las dos
arandelas y tuercas M8 debajo de la base (véase el
esquema). Recomendamos que esta operación se
realice entre 2 personas.
Min. 200 mm
Min. 7,87"
Min. 719 mm
Min. 28,3"
Zone: Rev.: Description Date Sign.:
Revisions
Title:
Drawing no.:
Dim. without indication of margin acc. to DS/ISO 2768-1 m
1:10
Montering på væg
Morsø 7400
RSV
24.08.2017
A3
Assembly drawing
Date of print: 24-08-2017
C:\Working\7400 Fuelchamber with casted front.SLDASM
7400-175 a
Itemno.:
This drawing is Morsø Jernstøberi A/S' property and must not be sold, lended or copied without any written authorization from the company.
Material:
Weight kg:
Model no.
Drawingtype:
Location of file:
Scale:
Format:
Released:
Construction:
Min. 200 mm
Min. 7,87"
Min. 719 mm
Min. 28,3"
Zone: Rev.: Description Date Sign.:
Revisions
Title:
Drawing no.:
Dim. without indication of margin acc. to DS/ISO 2768-1 m
1:10
Montering på væg
Morsø 7400
RSV
24.08.2017
A3
Assembly drawing
Date of print: 24-08-2017
C:\Working\7400 Fuelchamber with casted front.SLDASM
7400-175 a
Itemno.:
This drawing is Morsø Jernstøberi A/S' property and must not be sold, lended or copied without any written authorization from the company.
Material:
Weight kg:
Model no.
Drawingtype:
Location of file:
Scale:
Format:
Released:
Construction:

18
Installazione a parete della stufa
Morsø 7370/7470
Il telaio per il montaggio a parete è dotato di
8 fori, per il ssaggio a muro mediante viti a
espansione. Per garantire un saldo ssaggio
stufa sul muro, è necessario utilizzare almeno
4 degli 8 fori presenti sul telaio per montaggio
a parete.
Le viti utilizzate devono avere dimensioni
adeguate per garantire che il muro, e il materiale
di cui esso è composto, sia in grado di sostenere
il peso della stufa. Il peso della stufa è pari a 114
kg. Pertanto, il cliente/installatore, ha il compito
di assicurarsi che il muro/camino, sia in grado
di sostenere adeguatamente il peso della stufa.
Si noti che le canne fumarie a elementi e quelle
semi mattonate non sempre sostenere il peso
della stufa. In caso di dubbi, contattare una
persona qualicata.
Il telaio di ssaggio può essere utilizzato come
dima per l’esecuzione dei fori. La distanza minima
da pavimenti realizzati in materiale inammabile
è di 275 mm.
Si noti che non devono essere utilizzati tappi
per muri in plastica, a causa degli eetti del
calore generato dalla stufa.
Se si desidera utilizzare lo scarico fumi posteriore,
sarà necessario realizzare un raccordo di riduzione
adeguato sulla parete, e il telaio per montaggio a
parete dovrà essere ssato al muro (vedi schema).
Dopo aver disimballato il corpo della stufa,
rimuovere le parti smontate dal suo interno. Il
vassoio di raccolta ceneri, il paraamma inferiore
in vermiculite, la griglia forgiata e la base intermedia
devono essere rimossi.
Lo schermo paracalore posto sul retro della stufa
deve essere svitato e non dovrà essere utilizzato in
caso di installazione a parete.
Min. 200 mm
Min. 7,87"
Min. 719 mm
Min. 28,3"
Zone: Rev.: Description Date Sign.:
Revisions
Title:
Drawing no.:
Dim. without indication of margin acc. to DS/ISO 2768-1 m
1:10
Montering på væg
Morsø 7400
RSV
24.08.2017
A3
Assembly drawing
Date of print: 24-08-2017
C:\Working\7400 Fuelchamber with casted front.SLDASM
7400-175 a
Itemno.:
This drawing is Morsø Jernstøberi A/S' property and must not be sold, lended or copied without any written authorization from the company.
Material:
Weight kg:
Model no.
Drawingtype:
Location of file:
Scale:
Format:
Released:
Construction:
Min. 200 mm
Min. 7,87"
Min. 719 mm
Min. 28,3"
Zone: Rev.: Description Date Sign.:
Revisions
Title:
Drawing no.:
Dim. without indication of margin acc. to DS/ISO 2768-1 m
1:10
Montering på væg
Morsø 7400
RSV
24.08.2017
A3
Assembly drawing
Date of print: 24-08-2017
C:\Working\7400 Fuelchamber with casted front.SLDASM
7400-175 a
Itemno.:
This drawing is Morsø Jernstøberi A/S' property and must not be sold, lended or copied without any written authorization from the company.
Material:
Weight kg:
Model no.
Drawingtype:
Location of file:
Scale:
Format:
Released:
Construction:
Min. 200 mm
Min. 7,87"
Min. 719 mm
Min. 28,3"
Zone: Rev.: Description Date Sign.:
Revisions
Title:
Drawing no.:
Dim. without indication of margin acc. to DS/ISO 2768-1 m
1:10
Montering på væg
Morsø 7400
RSV
24.08.2017
A3
Assembly drawing
Date of print: 24-08-2017
C:\Working\7400 Fuelchamber with casted front.SLDASM
7400-175 a
Itemno.:
This drawing is Morsø Jernstøberi A/S' property and must not be sold, lended or copied without any written authorization from the company.
Material:
Weight kg:
Model no.
Drawingtype:
Location of file:
Scale:
Format:
Released:
Construction:

19
Sul retro della stufa, rimontare le due viti po-
ste sul lato inferiore, per sigillare i fori utilizzati
per il ssaggio dello schermo paracalore.
Installare l’attacco angolare mediante le due
viti precedentemente utilizzate per il ssaggio
dello schermo paracalore.
Rimuovere le 4 viti M6x25 con le relative ron-
delle, e utilizzare tali viti per il ssaggio della
piastra base sui fori anteriori.
Sollevare la stufa e disporla in modo che le due viti
M8 sotto la base della stufa stessa entrino nei due
fori ovali del supporto per il montaggio a parete.
Fissare le due viti M6x12 in dotazione nella parte
superiore della stufa. Fissare inne le due rondelle
e i dadi M8 sotto la base della stufa (vedi schema).
Per l’esecuzione di questa operazione è vivamente
consigliabile utilizzare 2 persone.
Min. 200 mm
Min. 7,87"
Min. 719 mm
Min. 28,3"
Zone: Rev.: Description Date Sign.:
Revisions
Title:
Drawing no.:
Dim. without indication of margin acc. to DS/ISO 2768-1 m
1:10
Montering på væg
Morsø 7400
RSV
24.08.2017
A3
Assembly drawing
Date of print: 24-08-2017
C:\Working\7400 Fuelchamber with casted front.SLDASM
7400-175 a
Itemno.:
This drawing is Morsø Jernstøberi A/S' property and must not be sold, lended or copied without any written authorization from the company.
Material:
Weight kg:
Model no.
Drawingtype:
Location of file:
Scale:
Format:
Released:
Construction:
Min. 200 mm
Min. 7,87"
Min. 719 mm
Min. 28,3"
Zone: Rev.: Description Date Sign.:
Revisions
Title:
Drawing no.:
Dim. without indication of margin acc. to DS/ISO 2768-1 m
1:10
Montering på væg
Morsø 7400
RSV
24.08.2017
A3
Assembly drawing
Date of print: 24-08-2017
C:\Working\7400 Fuelchamber with casted front.SLDASM
7400-175 a
Itemno.:
This drawing is Morsø Jernstøberi A/S' property and must not be sold, lended or copied without any written authorization from the company.
Material:
Weight kg:
Model no.
Drawingtype:
Location of file:
Scale:
Format:
Released:
Construction:

20
MORSØ JERNSTØBERI A/S . DK-7900 NYKØBING MORS
E-Mail: [e-mail] · Website: www.morsoe.com
Morsø Jernstøberi A/S - 25.08.2017 - 72746200