Motorola i95cl Manual

Motorola iBoard
i95cl Support
Change-Out Instructions
@NNTN4315A@
NNTN4315A
i95cl Support.fm Page 1 Wednesday, May 22, 2002 11:13 AM

Detaching Support from iBoard
1. Slide the dock all the way out of the iBoard until
the rear support springs upward.
2. While holding the rear support, gently bend out
one of the wires until the support is free.
Attaching support to iBoard
Install desired support in manner opposite from Step 2
above.
NOTE: Ensure that the hinges face away from
the iBoard when installing.
IMPORTANT: Do not over bend the wire while
attempting to attach the support
to the iBoard.
i95cl Support.fm Page 2 Wednesday, May 22, 2002 11:13 AM