Motorola 3200 User manual

RF-Conductor!™
Controller
NIU Remote Configuration
Issue Date: May 1998
6880494G55-O
Series: Wireless Messaging System
System Version: WMS-Data
Software Version: 1.3 and
WMS Two-Way 3.0
Models 3200 and 3210

RF-Conductor!™
Controller
NIU Remote Configuration
Issue Date: May 1998
6880494G55-O
Series: Wireless Messaging System
System Version: WMS-Data
Software Version: 1.3

RF-Conductor! Controller NIU Remote Configuration
May 1998 6880494G55-O iii
10/28/97
Foreword
General Information
The information in this manual has been reviewed for accuracy. However, no responsibility is
assumed for inaccuracies. Motorolareserves the right to make changes to any products
discussed herein. The information in this document is subject to change without notice.
Motorola assumes no liability for hardware or software damage or loss of data because of
errors or omissions in this manual. Motorola does not assume any liability arising from the
application or use of any products or circuits described herein. Neither does Motorola convey
any license under its patents or right of others.
Refer questions concerning the contents of this manual or requests for related circuit board
information to the following location:
Motorola, Inc.
Paging Systems Group
Multimedia Publications Department
5401 North Beach St., MS E230-A
Fort Worth, TX 76137-2794
or telephone: [phone]
To access on-line electronic information (BBS) for service notices and the latest software
releases, call the Paging One-Call-SupportCenter. To request additional manuals or parts,
please contact the Motorola Americas Parts Division:
telephone: [phone]
facsimile: [phone]
To request a part number, contact the Parts Identification Group:
telephone: [phone]
For Motorola Infrastructure and communicator test equipment, contact the Motorola Test
Equipment Center:
telephone: [phone]

Foreword RF-Conductor! Controller NIU Remote Configuration
iv 6880494G55-O May 1998
Global Service Organization
Motorola provides Infrastructure and communicator technical support through authorized or
company-owned Service Centers. Motorola also provides service for communicators on a
contract basis. For contract service information, please contact your local Motorola
representative or the Paging One-Call-Support Center:
Motorola, Inc.
Paging One-Call-Support Center
5401 North Beach St., MS E112
Fort Worth, TX 76137-2794
telephone: [phone] or
[phone]
facsimile: [phone]
Service Training
Motorola, through its Advanced Messaging Technical Training Group in Fort Worth, Texas,
offers courses on communicators, messaging switches, transmitters, and receivers. These
courses are taught on the site or at a customer’s location.
Students learn to install, configure, and maintain Motorola messaging systems. The
classrooms at Motorola are equipped to ensure hands-on experience in practical lab exercises.
Training courses range from a basic introduction to communicators and messaging systems to
customized classes on specific systems and large system applications.
To obtain a course catalog or scheduling information, please call [phone] or
[phone] and ask for the training coordinator.

RF-Conductor! Controller NIU Remote Configuration Foreword
May 1998 6880494G55-O v
Computer Software Copyrights
The Motorola products described in this manual might include copyrighted Motorola
computer software stored in semiconductor memories and other media. Laws in the United
States and other countries preserve for Motorola certain exclusive rights for copyrighted
computer programs, including the exclusive right to copy or reproduce in any form the
copyrighted computer software.
Accordingly, any copyrighted Motorola computer software contained in the Motorola
products described in this manual cannot be copied or reproduced in any manner without the
express written permission of Motorola.
Furthermore, the purchase of Motorola products does not grant, either directly or by
implication, estoppel, or otherwise, any license under the copyrights, patents or patent
applications of Motorola, except for the normal, nonexclusive, royalty-free license to use that
arises by operation of law in the sale of a product.
Trademarks
Motorol, the Motorola logo, and Nucleus Reg. U.S. Pat. and TM. Off, Motorola, Inc. Paging
One-Call Support, RF-Conductor!, and RF-C! are trademarks of Motorola, Inc.
Trademarks contained herein are the acknowledged property of their respective owners.

Foreword RF-Conductor! Controller NIU Remote Configuration
vi 6880494G55-O May 1998
Important Safety Information
The installation, maintenance, and/or operation of this equipment may present potentially
unsafe conditions, including, but not limited to, electrical shock, improper voltage to
components, and improper operation that can cause personal injury, death or damage to
property.
Read Instructions: Read all the safety instructions before operating the equipment. Retain
these safety instructions for future reference. Specialized procedures and instructions are
required and must be followed. Also, all applicable safety procedures, such as Occupational,
Safety, and Health Administration (OSHA) requirements, National Electric Code
Requirements, local code requirements, safe working practices, and good judgement must be
used by personnel.
Heed Admonitions: Adhere to all warnings on the equipment and in the operating
instructions. Follow all operating and use instructions. Two safety admonitions are used in
this instruction manual to indicate:
• Equipment damage–
• Personal injury or injury that may result in death–
Mounting: Mount the equipment only as recommended by the manufacturer. Situate the
equipment away from heat sources such as radiators, heat registers, stoves, or other
equipment (including amplifiers) that produces heat.
CAUTION This safety admonition applies to an operating or maintenance procedure, practice or
condition which, if not strictly observed, could result in damage to the equipment or
database.
DANGER This safety admonition applies to an operating or maintenance
procedure, practice or condition which, if not strictly observed, could
result in serious personal injury or death.

RF-Conductor! Controller NIU Remote Configuration Foreword
May 1998 6880494G55-O vii
Power Sources and Grounding: Connect the equipment to the type of power source
described in the installation instructions or as marked on the equipment. Take precautions to
avoid defeating the grounding or polarization provisions of the equipment. Disconnect the
power to the equipment by a circuit breaker when left unused for long periods of time.
Cleaning: Clean the outside of the equipment by using only a damp cloth. Do not immerse the
equipment in any type of liquid, including water. Do not use liquid cleaners or aerosol
cleaners. Dirt or other foreign matter should not be allowed to accumulate in the interior of
the enclosure.
Damage Requiring Service: Do not attempt to perform service functions that are not
described in the operating instructions. All other servicing should be referred to qualified
service personnel.
Telephone Line Installation: All telephone line connections to the equipment should be
accomplished with the telephone lines disconnected from the network interface.
Motorola is not responsible for static damage to equipment not sold under the Motorola logo.
Motorola, Inc. 1998. All rights reserved. Printed in the U.S.A.

Foreword RF-Conductor! Controller NIU Remote Configuration
viii 6880494G55-O May 1998