Motorola H790 - Headset - Monaural User manual

Quick Start Guide
MOTOROLA
H790

1
your headset
charge it
pair & connect
put it on
turn on & off
battery check
calls
status indicators
tips & tricks
problems?
Safety & General Information
FCC Notice to Users
European Union Directives
Conformance Statement
Contents
2
3
4
8
10
11
12
14
16
17
19
23
34

2
your headset
Take a moment to familiarize yourself with your new Motorola H790 Headset.
Earhook
Charging
Port
Volume
Buttons
Call
Button
Power
Switch
Ear
Speaker
Indicator
Light
Micro-
phone
charge it

3
Charge your headset before using it.
The indicator light is red or yellow while the battery is charging. When the battery
is fully charged, the indicator light turns green.
Note: Headset is not functional while charging.
Note: Your battery is designed to last the life of your product. It should only be
removed by a recycling facility. Any attempt to remove or replace your battery will
damage your headset.
charge it

4
Once charged, let’s get your headset paired and connected to your Bluetooth
phone(s).
pair & connect rst phone
Turn off any Bluetooth devices previously paired with your headset.
Turn on the Bluetooth feature on your phone.
Put headset on your ear (see “wear it” on page 9 for help).
Turn on your headset (see “turn on” on page 10 for help).
The indicator light becomes steadily lit in blue and you hear “ready to pair”.
Follow voice prompts to connect your phone to your headset.
Note: When prompted for the passkey, enter 0000.
pair & connect

5
When your headset successfully pairs with your phone, you hear “pairing
complete”. When connected, you hear “phone 1 connected” and see the indicator
light rapidly ash in blue and purple.
pair & connect second phone (optional)
Turn off rst phone and any other Bluetooth devices previously paired with
your headset.
Turn your headset off (see “turn off” on page 10 for help).
Turn on the Bluetooth feature on your phone.
Put headset on your ear.
Turn on your headset.
The indicator light becomes steadily lit in blue and you hear “ready to pair”.
pair & connectpair & connect

6
Follow voice prompts to connect your phone to your headset.
When your headset successfully pairs with your phone, you hear “pairing complete”.
When connected, you hear “phone 1 connected” and see the indicator light rapidly
ash in blue and purple.
To connect to both phones, simply turn on the rst phone while the second phone
is connected. When you hear “phone 2 connected”, your headset is connected
to both phones. The last paired phone (your second phone) is now your primary
phone (or “phone 1”) for voice dial functionality.
pair & connect

7
test your connection
Place the headset on your ear.
On one phone, dial the number you want to call and press Call/Send key.
Repeat for the second phone.
If your phones and headset are successfully connected, you hear ringing on the
headset.
For daily use, make sure your headset is turned on, and your phone’s Bluetooth
feature is on. Your headset and phone will connect automatically.
pair & connectpair & connect

8
choose an earbud
To get the best headset performance, try out all the supplied ear cushions to get
a good t.
choose an ear
Your headset comes ready for the right ear. To change for the left ear:
put it on

9
wear it
Flex the ear hook and loop it over your ear.
Tip: For optimal audio performance and comfort, be sure to position the ear cushion
into your ear canal and point the headset microphone towards your mouth.
put it onput it on