Motorola H790 - Headset - Monaural User manual

Quick Start Guide
motorola H790

your headset
1
your headse t
Take a moment to familiarize yourself with your new
Motorola H790 Headset.
Earhook
Charging
Port
Volume
Buttons
Call
Button
Power
Switch
Ear
Speaker
Indicator
Light
Micro-
phone

charge it
2
charge it
Charge your headset before using it.
The indicator light is red or yellow while the battery is
charging. When the battery is fully charged, the indicator
light turns green.
Note: Headset is not functional while charging.
Note: Your battery is designed to last the life of your
product. It should only be removed by a recycling facility.
Any attempt to remove or replace your battery will
damage your headset.

pair & connect
3
pair & co nnect
Once charged, let’s get your headset paired and
connected to your Bluetooth phone(s).
pair & connect first phone
1 Turn off any Bluetooth devices previously paired with
your headset.
2 Turn on the Bluetooth feature on your phone.
3 Put headset on your ear (see “wear it” on page 7 for
help).
4 Turn on your headset (see “turn on” on page 8 for
help).
The indicator light becomes steadily lit in blue and
you hear
“ready to pair” .
5 Follow voice prompts to connect your phone to your
headset.
Note: When prompted for the passkey, enter 0000 .
When your headset successfully pairs with your phone,
you hear
“pairing complete” . When connected, you
hear
“phone 1 connected” and see the indicator light
rapidly flash in blue and purple.

pair & connect
4
pair & connect second phone
(optional)
1 Turn off first phone and any other Bluetooth devices
previously paired with your headset.
2 Turn your headset off (see “turn off” on page 8 for
help).
3 Turn on the Bluetooth feature on your phone.
4 Put headset on your ear.
5 Turn on your headset.
The indicator light becomes steadily lit in blue
and
you hear “ready to pair”.
6 Follow voice prompts to connect your phone to your
headset.
When your headset successfully pairs with your phone,
you hear
“pairing complete” . When connected, you
hear
“phone 1 connected” and see the indicator light
rapidly flash in blue and purple.
To connect to both phones, simply turn on the first phone
while the second phone is connected. When you hear
“phone 2 connected” , your headset is connected to

pair & connect
5
both phones. The last paired phone (your second phone)
is now your primary phone (or “phone 1”) for voice dial
functionality.
test your connection
1 Place the headset on your ear.
2 On one phone, dial the number you want to call and
press
Call/Send key. Repeat for the second phone.
If your phones and headset are successfully connected,
you hear ringing on the headset.
For daily use, make sure your headset is turned on, and
your phone’s Bluetooth feature is on. Your headset and
phone will connect automatically.

put it on
6
put it on
choose an earbud
To get the best headset performance, try out all the
supplied ear cushions to get a good fit.
choose an ear
Your headset comes ready for the right ear. To change for
the left ear:

put it on
7
wear it
Flex the ear hook and loop it over your ear.
Tip: For optimal audio performance and comfort, be sure
to position the ear cushion into your ear canal and point
the headset microphone towards your mouth.

turn on & off
8
turn on & off
turn on
Slide the Power switch to the on position (no red is
shown under the switch)
. The indicator light flashes blue
three times, then flashes in blue and purple (if connected
with a device) or is steadily blue (if ready to be paired).
turn off
Slide the Power switch to the off position (red is shown
under switch). The indicator light flashes three times
then turns off.
Power
Switch
Indicator
Light