Motorola HK100 User manual

Quick Start Guide
MOTOROLA HK100

1
Congratulations
Your MOTOROLA HK100 headset is designed for
quick connections, clear calls, and lasting comfort.
We’ve crammed all of the main features of your
headset into this handy guide, and in a matter of
minutes we’ll show you just how easy your
headset is to use.
So go on, check it out.
more information
on the Web: www.motorola.com/support
Caution: Before using your headset for the first
time, please read the important
Safety,
Regulatory & Legal
information at the back of
this guide (page 17).

Your headset2
Your headset
the important parts
Call
Button
Earhook
Status
Light
Mini USB
Charging
Connector
Ear
Speaker
Microphone
(on side)

Charge it 3
Charge it
let’s get you up and running
Indicator Light
Red/Purple = charging
Blue = fully charged

Charge it4
While your headset is charging, you won’t be able
to use it.
Note: Your battery is designed to last the life of
your product. It should only be removed by a
recycling facility. Any attempt to remove or replace
your battery will damage your headset.

Basics 5
Basics
a few essentials to get you started
Turn it on & off
Press and hold
the Call button
until you hear a
series of tones.
Note: For the
Spanish and
Mandarin
versions, instead
of tones, you hear voice prompts.
Call Button

Basics6
Wear it
Flex the ear hook and loop it
over your ear.
Make sure the speaker aligns
with your ear canal, and the
microphone is pointing
towards your mouth.
Your headset
comes ready
for use on
your right ear.
To change for
left ear, just
pull off the earhook, turn, and reinstall.

Pair & connect 7
Pair & connect
connect and go
Pair & connect with your
phone
1 Turn off any Bluetooth® devices previously
paired with your headset.
2 Turn on the Bluetooth feature on your phone.
3 Turn on your headset (see “Turn it on & off”
on page 5).
The status light becomes steadily lit in blue.
Note: When prompted for the passkey, enter
0000 .
When connected, you see the status light rapidly
flash in blue and purple.

Pair & connect8
For daily use, make sure your headset is turned
on, and your phone’s Bluetooth feature is on. Your
headset and phone will connect automatically.
Test your connection
1 Place the headset on your ear.
2 On the phone, dial the number you want to
call and press the
Call/Send key.
If your phone and headset are successfully
connected, you hear ringing on the headset.