MSI Digital@nywhere-ATSC User manual

1
Digital@nywhere-ATSC Installation Manual
Contents
V1.10
Chapter 1: Digital@nywhere-ATSC Hardware Installation ..............................................................................2
1.1 Package Contents.................................................................................................................................2
1.2 System Requirements...........................................................................................................................2
1.3 Hardware Installation...........................................................................................................................2
Chapter 2 : Digital@nywhere-ATSC Drivers And Utilities Setup.....................................................................3
Chapter 3: Power Cinema Software Installation................................................................................................5
Chapter 4: Remote Control Layout....................................................................................................................8

-2-
Chapter 1: Digital@nywhere-ATSC Hardware Installation
1.1 Package Contents
Unpack your Digital@nywhere-ATSC HDTV package and make sure that all items are included. The
following items should be included in your package:
Digital@nywhere-ATSC PCI Card
Remote control and remote sensor
Audio cable
Converter plug x 2
User Manual
Quick Guide
Installation CD
1.2 System Requirements
Pentium-IV 1.6GHz or above
256MB RAM of system memory or above
One available PCI slot
Graphics card (Must support DirectX 9.0)
Sound card (AC97 Compatible Sound Card)
1GB free HD space
CD-ROM drive (For software installation)
Microsoft Windows® XP/ MCE
(when using MCE OS an extra 3rd party DVD decoder must be installed)
1.3 Hardware Installation
Follow the steps shown below for installation of your TV card and use the pictorial guide below for
peripheral connections.
1. Turn off all power to the computer and any
attached peripherals.
2. Select an available PCI slot and remove the slot
cover, screw, etc.
3. Push the TV card firmly into the slot until it
snaps in place and secure the card by replacing
the screw you removed in step 2.
4. Replace the PC lid cover back and turn on the
power..

-3-
Chapter 2 : Digital@nywhere-ATSC Drivers And Utilities Setup
The Digital@nywhere-ATSC package comes with complete Windows software utilities. These utilities can
be found on the installation CD included in the package. Before installation, we recommend that you exit all
background programs. These include applications such as anti-virus software and system monitoring
applications.
1. Once you finish the hardware installation, restart your
system. A window labeled: “Windows Found New
Hardware Wizard” will pop up. Click “Cancel” and run
the utilities setup included in the CD.
2. Put the installation CD into the CD-ROM drive. Check
Driver Install to install drivers and utilities, the autorun
function will help you setup step by step.
3. The setup utilities will guide you install
Digital@nywhere-ATSC PCI TV card drivers and
utilities on your PC. Check “Next” to continue.

-4-
4. Check “Next” to install the BDA drivers.
5. Click “Start” to begin installing MSI
Digital@nywhere-ATSC BDA driver, please wait
for a minute.
6. Choose “Yes, I want to restart my computer now” and
click “Finish” to restart your computer and
activate the drivers.
Note:
You can restart your computer anytime after installing “Power Cinema” software application

-5-
Chapter 3: Power Cinema Software Installation
After the drivers are installed, install “Power Cinema” software by following the steps below.
1. Click “Power Cinema” from autorun then the installation
wizard of Power Cinema will guide you through
installation.
2. Select the language you want to install.
3. Check “Next” to install Power Cinema on your computer.

-6-
4. Read the license agreement and click “Yes” to install
Power Cinema.
5. Enter the User Name, Company Name and CD-Key, then
click “Next” to install.
6. Click “Next” to install or click “Browse” to select the
folder you want to install.

-7-
7. Select the folder and click “Next” to continue.
8. Click “Next” to install CyberLink Power Cinema on your
computer.
9. Click “Finish”.
Note: For user manual of Power Cinema, click “Browse” and choose Power Cinema folder.

-8-
Chapter 4: Remote Control Layout
：Powerkey ：Time Shifting
：Standby ：Stop
：NumberKeys(0~9) ：Record
：Back ：Fast Rewind & Forward
：Enter
：Previous&NextChapter
：ChannelUp/Down ：Pause & Play
：VolumeUp/Down ：Stop
：Mute ：Back to previous
：Stereo ：Enter TV Manual
：Source ：View the TV recorded list
：ZoomIn/Out ：View the captured Picture
：ShutDown ：Enter Video Manual
＆＆& ：：Enter the recorded Music list
Mouse Control Pad or Arrow Keys ：Guide
：Enter ：Help

-9-
Key Definitions
Key Description MCE 2005 PowerCinema
Put the system in standby/ wake
the system N/A N/A
Number Keys (0~9) Y Y
Back previous step N/A Y
Enter Y Y
Stereo N/A N/A
Switch Video Source N/A N/A
Zoon In / Out Y N/A
Shut Down Y Y
Mouse Control Pad or Arrow
keys Y Y
Enter Y Y
Time Shifting N/A N/A
Stop Y Y
Record Y Y
Fast Rewind & Forward Y Y
Previous & Next Chapter N/A Y
Pause & Play Y Y
Stop Y Y

-10-
Hot Key MCE 2005 PowerCinema
Back to previous page Escape current screen
Enter TV Manual Capture photo
Record TV list Enter TV Manual
View captured photo Information of Electronic Program Guide
Enter Video Manual View Captured photo
View recorded Music Enter Video Manual
Guide TELTXT/ClosedCaption
Help Help

1
CyberLink
PowerCinema 4
User ’s Guide

2
Copyright and Disclaimer
All rights reserved. No part of this publication may be reproduced, stored in a retrieval
system, or transmitted in any form or by any means electronic, mechanical, photocopying,
recording, or otherwise without the prior written permission of CyberLink Corporation.
To the extent allowed by law, POWERCINEMA IS PROVIDED “AS IS”, WITHOUT
WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING
WITHOUT LIMITATION ANY WARRANTY FOR
INFORMATION, SERVICES, OR PRODUCTS PROVIDED THROUGH OR IN
CONNECTION WITH POWERCINEMA AND ANY IMPLIED WARRANTIES OF
MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE,
EXPECTATION OF PRIVACY, OR NON-INFRINGEMENT.
BY USING THIS SOFTWARE, YOU AGREE THAT CYBERLINK WILL NOT BE
LIABLE FOR ANY DIRECT, INDIRECT, OR CONSEQUENTIAL LOSS ARISING
FROM THE USE OF THIS SOFTWARE OR MATERIALS
CONTAINED EITHER IN THIS PACKAGE.
The terms and conditions here under shall be governed and construed in accordance
with the laws of Taiwan.
PowerCinema is a registered trademark along with other company and product names
mentioned in this publication, used for identification purposes and remain the exclusive
property of their respective owners.
International Headquarters
Mailing Address CyberLink Corporation
15F, #100, Min Chuan Road, Hsin Tian City
Taipei County, Taiwan, R.O.C.
Web Site www.cyberlink.com
Telephone [phone]
Fax [phone]
Copyright © 2006 CyberLink Corporation. All rights reserved.

Contents
Overview......................................................................................................1
Home Page...........................................................................................1
Navigation Controls.............................................................................2
Browsing for Media Content................................................................2
Player Controls for Mouse Use............................................................3
Remote Control....................................................................................3
Settings.................................................................................................4
General Settings...........................................................................4
Display Settings ...........................................................................5
TV ................................................................................................................6
Watching TV........................................................................................6
Instant Replay ......................................................................................7
TV Recording Schedules .....................................................................7
TV Preview ..........................................................................................7
TV Settings ..........................................................................................8
Signal Settings..............................................................................8
Channel Settings ..........................................................................8
Recording Settings.......................................................................9
Guide Settings..............................................................................9
Videos ........................................................................................................10
Watching Videos................................................................................10
Browsing for Videos..........................................................................10
Video Settings....................................................................................11

CyberLink PowerCinema
1
Chapter 1:
Overview
PowerCinema is an integrated multimedia player. The Home page displays the
available media types, which you can scroll through using your mouse's scroll wheel,
the keyboard up/down arrows, and the Up/Down buttons on the remote.
To begin enjoying media, select a media type on the Home page. PowerCinema
switches to the media type you have chosen, providing playback controls and
other options.
Home Page
If your computer is connected to the Internet, PowerCinema periodically displays
product news and information in the lower right corner. Selecting a product icon
opens a web page with more details and ordering information.

CyberLink PowerCinema
2
Navigation Controls
The navigation bar across the top of the window contains a number of buttons for
navigating around the PowerCinema program. Select the Home icon to return
to the Home page. Select the Back icon to return to a previous page. The
Minimize, Full Screen/ Window, and Close buttons have standard Windows
behavior.
The TV, Videos, and Radio functions continue to play as you navigate around
PowerCinema, allowing you to enjoy your media while performing other tasks. To
return to the media that is playing, select the Now Playing pane in the bottom left
corner.
Browsing for Media Content
Media pages have functions on the left and a content browsing area on the right.
Files are displayed as thumbnails (or icons) and organized in folders. Select a folder
to display its contents.
If the number of files and folders displayed exceeds one page in the
content browsing area, use the up/down buttons in the lower right
corner to scroll through the pages. You can also use the u
p/down arrows on the keyboard to scroll up or down one row, or the Page Up/Page
Down keys to scroll up or down an entire page.
To go up one folder level, select the Up One Level icon

CyberLink PowerCinema
3
Player Controls for Mouse Use
To play a media file, select its thumbnail (or icon) in the content
browsing area. The player control panel appears whenever you move the mouse, then
automatically disappears several seconds after the mouse stops moving.
Standard playback buttons include Stop, Play/Pause, Previous, Rewind, Fast
Forward, and Next. Volume controls include Volume Down, Mute/Speaker On,
and Volume Up. Other control buttons vary depending on the type of media being
played.
Remote Control
A remote control is available for convenient media enjoyment from across the room.
To control media playback using the remote control, use the dedicated playback
control buttons. Most of the buttons behave like those on a consumer DVD or CD
player.
The up, down, left, and right buttons navigate through
PowerCinema. Press OK to accept a selection.

CyberLink PowerCinema
4
Settings
Selecting Settings on the Home page opens a page of options for configuring
PowerCinema.
General Settings
PowerCinema Help
opens this help system.
Display Settings opens a
page with options for
configuring your display
device. (See "Display
Settings" on page 5.)
Audio Settings opens a
page with options for
configuring your
computer's audio. (See
"Audio Settings" on page 6.)
Run Setup Wizard opens the wizard that appears the first time you run PowerCinema,
allowing you to optimize your computer if you did not do so after installation, or if
you upgrade your computer. You can also register your copy of PowerCinema.
About PowerCinema opens a page with version and copyright information, as
well as your personal registration information.
Restore Default Settings returns all of the settings in PowerCinema to their original
values.
Note: Other settings can be found in the function-specific help
sections.

CyberLink PowerCinema
5
Display Settings
Use the Screen Ratio to indicate if you have a standard (4:3) or widescreen (16:9)
display. 16:9 (or 4:3) Movie Display Type determines how movies and videos
are converted to fit the screen when they do not match the screen ratio.
Letterbox keeps the video display undistorted and fills the extra space with black
bars. CLPV is a video
stretching technology
from CyberLink that
produces minimal
distortion in the center
of the picture. Pan &
Scan displays the
central portion of DVD
titles in widescreen
ratio, and allows you to
drag the display area to
view different portions
of the video.
Color Profile allows
you to change the overall color scheme of video content during playback. Original
uses the color scheme of the disc you are watching. Vivid, Bright, and Theater add
enhanced color to the video display. CLEV-2 is a video enhancement technology
from CyberLink that dynamically adjusts the brightness, contrast, and
saturation if the movie you are watching contains scenes that are
overly dark or bright. Options other than Original require more
system resources to run.
The Skin Type option allows you to change the overall appearance of the program.
Load Default Settings returns the settings on this page to their original values. If
you modify any settings on this page, you must select Apply for these changes to
take effect.

CyberLink PowerCinema
6
Chapter 2:
TV
PowerCinema allows you to watch TV on your computer. You can watch TV
programs, schedule recordings, and watch recorded TV shows. Select TV on the
Home page to open the main TV page.
Watching TV
Select Video Input to choose the source of your TV broadcasts. The TV program
will be displayed in display window. Click the display window to view the TV
program in full screen.
The Recorded TV page displays files recorded from the TV. A thumbnail image
shows the first frame of the file. Select a recorded TV file to play it at full screen.
To return to the TV page, select Stop. To change the order in which items are
displayed, use the Sort By... option. Schedule displays all current recording
schedules.
When you watch TV, the following additional buttons appear on the
playback controls: Channel up (switches up one channel),
Channel down (switches down one channel), Snapshot
(takes a snapshot of the current frame of video), TeleText/Closed
Captions (displays TeleText/Closed Captions information),
Record (records TV content as a video file), Video Input (switches between
different TV broadcast sources), and Audio Input (switches between different TV
audio sources). Select Channel List to see a list of the channels available.

CyberLink PowerCinema
7
Instant Replay
By default, the instant replay function is enabled in PowerCinema. To create an
instant replay, PowerCinema records the TV broadcast as a file, creating a slight lag
between the broadcast and the TV content that you watch. You can navigate forward
and backward to create an instant replay or to skip over commercials.
TV Recording Schedules
To set a recording schedule, select New Schedule. (Make sure that TV is selected.)
In the page that opens, select the Channel you want to record, the Scheduling
Interval, and the recording date and times.
Select Apply to activate the recording schedule, or Cancel to quit without accepting
the schedule. Select an existing recording schedule to open it for modification. Select
Delete to remove a recording schedule you have previously created.
TV Preview
TV Preview displays a wall of thumbnails, giving you a preview of all available
channels. To access TV Preview, select Channel List and scroll down to the bottom
of the list. The TV Preview automatically scans through all of the available channels.
Select a thumbnail to watch the corresponding channel.
Program Guide lists available programs by channel and time. Find Program allows
you to find a specific TV program. To change the order in which items are
displayed, use the Sort By... option.