Multay AN03 User manual

Thank you for buying our product
Rectangular Dining Table
AN03
Assembly Instruction
Step By Step Assembly Instructions
PRE-ASSEMBLY PREPARATION
1. Please check the pack contents before attempting to assemble this product.
A full checklist of components is given in this leaflet. If any components are missing,
please contact the retailer from whom you bought this product.
2. This product is VERY HEAVY, It should be assembled as near as possible to the
point of use. TAKE CARE WHEN LIFTING to avoid personal
injury and ( or ) damage to the product.
3. This product takes approximately 60 minutes to assemble with 4 people.
4. The fitting pack contains SMALL ITEMS which should be :
“KEPT AWAY FROM YOUNG CHILDREN“
5. Read this leaflet in full before commencing assembly.
6. You will require a 12 and 13 mm spanner (not supplied).
Page 1

HARDWARE IDENTIFICATION
ITEM DESCRIPTION Qty
A
B
Table Top
Base Leg 2
1
Page 2
Rectangular Dining Table
AN03
Assembly Instruction
CDeck screw M6 x 75mm & Ring Washer
8
(B) Base Leg
(A) Table Top
(B) Base Leg

Deck screw
with washer
Page 3
DONE !
Rectangular Dining Table
AN03
Assembly Instruction
( C) Dex Screw 75mm