Multay Seville 2 Door Wardrobe KD SVB09 User manual

Thank you for buying our product
Seville 2 Door Wardrobe KD ( SVB09 )
Assembly Instruction
PRE-ASSEMBLY PREPARATION
Step By Step Assembly Instructions
Page 1
1.Please check the pack contents before attempting this product.
A full checklist of component is given in this leaflet. If any component are missing, please contact
the retailer from whom you bought this product.
2.This product is heavy, it should be assembled as near as possible to the point of use.
TAKE CARE WITH LIFTING to affoid personal in jury and (or) damage to the product.
3.This product takes approximately 5 minutes to assemble with 2 people.
4.The fitting pack contains small items which should be :
KEPT AWAY FROM YOUNG CHILDREN.
5.Read this leaflet in full before commencing assembly.
6. You will require a crosshead screwdriver and Allen key (provided) to assemble this product.
7. WE RECOMMEND that you lay a protective cloth on your carpet during assembly, to prevent marking.

(C) RH Side Panel
(A) Top Cornice
(B) LH Side Panel
( E ) Base Panel
(D) Back Panel
(F) Door Panel (RH)
(F) Door Panel (LH)
(G) Hanging Rails
Item
A
B
C
D
E
F
G
H
Top Cornice
LH Side Panel
RH Side Panel
Back Panel
Base Panel
Door Panel (LH & RH)
Hanging Rails
Shoe Rails
Description
Panel and Fitting Identification
Qty
1
1
1
1
1
2
1
2
Item
LAllen Key
Description Qty
1
K
16
Screw
IExtending Hanging Rails
2
JAllen Bolt 12
(I) Extending
Hanging Rails
(H) Shoe Rails
Page 2
Seville 2 Door Wardrobe KD ( SVB09 )
Assembly Instruction

Side Panel
Step 1. Side Panel & Base Panel Assembly
Base Panel
Allen Bolt Allen Key
2. Top Cornice Assembly
Top Cornice
Side Panel
Allen Key
Allen Bolt
Fitting Allen Bolt M6 x 50 mm
Fitting Allen Bolt M6 x 50 mm
Allen Bolt
Page 3
Seville 2 Door Wardrobe KD ( SVB09 )
Assembly Instruction

3. Back Panel Assembly
Fitting screw
Screw
Back Panel
Page 4
Seville 2 Door Wardrobe KD ( SVB09 )
Assembly Instruction

Step 4. Door Assembly
Page 5
Seville 2 Door Wardrobe KD ( SVB09 )
Assembly Instruction

Step 5. - Locate the Hanging Rails ( I ) into the support
- Locate the shoe Rails ( J ) into the support
Step 6. - Remove stopper screw from the extending hanging rail (see #1)
- Insert extending hanging rail on to the hole of side panel (see #2)
- Attach stopper to extending hanging rail using screw (see #3)
Page 6
( #1 )
Extending Hanging Rails
Stopper Screw
( #2 ) ( #3 )
Seville 2 Door Wardrobe KD ( SVB09 )
Assembly Instruction