Multay Reims RB01 User manual

Thank you for buying our product
Reims Bed ( RB01 )
Assembly Instruction
PRE-ASSEMBLY PREPARATION
1.Please check the pack contents before attempting this product.
A full checklist of component is given in this leaflet. If any component are missing, please contact
the retailer from whom you bought this product.
2.This product is , it should be assembled as near as possible to the point of use.
TAKE CARE WITH LIFTING to affoid personal in jury and (or) damage to the product.
3.This product takes approximately 30 minutes to assemble with 2 people.
4.This product already contain fitting which should be :
“ KEPT AWAY FROM YOUNG CHILDREN “
5.Read this leaflet in full before commencing assembly.
heavy
Step By Step Assembly Instructions

(D) Slat
HARDWARE IDENTIFICATION
ITEM DESCRIPTION Qty
A
B
C
HEADBOARD
FOOTBOARD
SIDE RAILS
2
1
1
(A) Headboard
(B) Footboard
( C ) Side Rail
(E) Slat Support
( C ) Side Rail
(F) Bolt Connecting Rails
DSLATS ( Assembled )
1
ESLATS SUPPORT
FBOLT CONNECTING RAIL (Embedded in side rail)
4
Reims Bed ( RB01 )
Assembly Instruction
2

Headboard
1. HEADBOARD AND SIDE RAIL ASSEMBLY
Side Rail
1. “Left / Right” marked on headboard must be matched with “Left/Right” marked
on each side rail.
2. The side rail must be pushed down hardly to get in one level with headboard.
Headboard must follow to be adjusted as well.
PUSH DOWN
Note :
- Its required one person to hold
the headboard while the other
attached the side rail.
- These bed need both side rails attaching
to the headboard first.
# Step 1
Side Rail
Headboard
Side Rail
Reims Bed ( RB01 )
Assembly Instruction

# Step 3
( Turn clockwise to tighten )
Once step 1 and step 2 are done, side rail can be one level with headboard or footboard.
The bolt can be screwed well.
Connecting Bolt
Side Rail
Headboard / Footboard
Footboard
Side Rail
2. FOOTBOARD AND SIDE RAIL ASSEMBLY
1. “Left / Right” marked on footboard must be matched with “Left/Right” marked
on each side rail.
2. The side rail must be pushed down hardly to get in one level with footboard.
Footboard must follow to be adjusted as well.
# Step 2
PUSH DOWN
Reims Bed ( RB01 )
Assembly Instruction

3. SLAT SUPPORT ASSEMBLY
4. SLAT ASSEMBLY
Slat Support
Slat
Reims Bed ( RB01 )
Assembly Instruction