MULTISPAN MC-1003 User manual

www.multispanindia.com
Page - 1
OPERATING MANUAL
CLUTCH & BREAK CONTROLLER
MC - 1003
96 X 96 mm
MC - 1003
Specifications:
4) Output : 3 Relay
1st For Clutch (NO-C-NC)@5A,230V AC
2nd For Inching (NO-C-NC) @5A,230V AC
3rd (NO-C) For Batch @5A,230V AC
5) Power Supply : 100-250V AC ,50/60 Hz,Approx 4VA
6) Protection Level : IP-65 (Front side) As per IS/IEC 60529 : 2001
1) Model : MC - 1003
Dimension: 96 X 96 X 55 (H X W X D) mm
Panel Cutout : 92 X 92 (H X W) mm
2) Display : LCD 16*2
3) Input : 3 Input
1st Proxy (NPN) for clutch
2nd CMS
3rd Micro Switch
SET
R1
R2
R3
MC 1003
000000 BATCH
00.00 0000
RESET
ENT
Machine
Controller
MC 1003

www.multispanindia.com
Page - 2
Power on instrument. Display will show
WORKING:
Clutch will on depend on set time
Batch relay energise at each set value of batch count
Press key, to set clutch on time. it is selectable 00.00-99.99 sec. Milii sec,
Change By & key.
Press key, to set batch count. selectable up to 0-9999. it shows set batch
count,& change by & Key
Press key, to set delay time after achieving set batch count value.
Change by & key.& Settable up 0-99.99 sec.
Press key, to set relay on time (CUTTER) change by & key,
Settable up to 99.99 sec.
2nd relay for inching and turn on with micro switch.
NOTE: If in running position of clutch,if CMS proxy pulse come,clutch will be OFF
After this Delay time, cutter will on.
000000
00.00 0000
BATCH
TIME : 03.00
BATCH CNT : 0002
DLY TIME: 00.00
RLY TIME: 00.00
CLUTCH & BREAK
CONTROLLER
SET
SET
SET
SET
*
*
*
*
*
*
MC 1003

CONNECTION DIAGRAM:
www.multispanindia.com
Page - 3
MC 1003
17 8 9
12
1314
10
11
1617181920 15
23456
~
50/60 Hz
4 VA
100
250V AC
RELAY ON
CONTACT
GND I/P2+12V I/P1
LN
NC NCC C CNO NO NO
RELAY-1
CLUTCH
NPN PROXI
FOR START
NPN CMS
FOR STOP
INCHING BATCH
RELAY-2 RELAY-3

www.multispanindia.com
Page - 4
MC 1003
NOTE:
Product improvement and upgrade is a constant procedure. So for more updated operating information and support,
Please contact our helpline : [phone]/76/82 or Email at ser[email protected] Ver: 1601