Multistore EXC-900 User manual

PARTS IDENTIFICATION LIST
2000mm H x 900mm W x 450mm D
CAM HEADS 14
CAM PINS 14
BACKING NAILS 75
5/8 PANHEAD WALL SCREWS 1
25mm PANHEAD UNIT SCREWS 1
“L” SAFETY BRACKET 1
SHELF SUPPORT PINS 16
WARNING
Serious or fatal crushing injuries can occur from
furniture tip over. To prevent this furniture from
tipping over it must be permanently fixed to the wall
with the included wall attachment devices.
When attaching unit to wall put safety bracket in
middle of unit with 5/8 pan screw then 25mm pan
head screw into wall. For plasterboard without a
stud it is recommended to use a plug with screw
(not provided).
EXC-900 SHELF
Height: 2000 Width:900 Depth: 450
1) Left Gable: 446 x 1999
2) Right Gable: 446 x 1999
3) Top: 444 x 868
4) Base: 444 x 868
5) Kick face: 868 x 60
6) Cam Shelf: 444 x 868
7) Adjustable Shelves: 444 x 868
8) Back: 450 x 1938
9) Back: 450 x 1938
ASSEMBLY INSTRUCTION FOR EXC-900 SHELF

Step 1: Lay all panels on the floor to assemble.
Step 2: Secure Left Gable (1) to Top Shelf (3), then the Base
Shelf (4) and then follow with the Cam Middle Shelf (6).
Step 3: Ensure all Shelves are attached to the Left Gable,
then secure the Right Gable (2) to all 3 Shelves. Ensure you
follow the below cam instructions and use 4 x Cam Locks and
Pins per shelf.
Step 4: When this is all completed add the Kick Face (5) to
the Base Shelf (4).
1.
2.
3.
4.
6.
5.
INSTALLING CAM LOCK FIXINGS
Left Gable
Right Gable
Top Cam Shelf
Middle Cam Shelf
Base Cam Shelf
Kick
ASSEMBLY OF SHELL OF EXC-900 SHELF
7.
Backing Panel
8.
Adjustable Shelf
Tools Required
for Assembly

Step 5: Fold out the Backing Boards (7)
proceed to nail the Backing Board into
position with a hammer.
It is important to make sure the Backing
Boards are square with the left and right
gables.
To secure the middle add a few nails
across the Middle Cam Shelf.
Step 6: Tap Shelf Support Pins into
predrilled holes quantity 4 x Shelf Sup-
port Pins are required per Adjustable
Shelf (8).
Repeat for each shelf at what ever
height that suits.
ASSEMBLY BACKING BOARD
ASSEMBLY ADJUSTABLE SHELF
Shelf Support Pins