Multistore MAXI 16J3 Operating instructions

ASSEMBLY INTRUCTIONS FOR MAXI 16J3
TOP of UNIT
When aaching unit to wall put safety bracket in
middle of unit with 16 Pan head screw then
25mm Pan head screw into wall.
For plasterboard without a stud it is recommend-
ed to use a plug with screw (not provided).
NO MODEL DESCRIPTION QTY
1CONFIRMAT SCREWS 20
2CAPS 20
3SHELF PINS 8
4BACKING NAILS 75
NO MODEL DESCRIPTION QTY
5BRACKETS 1
6BRACKET UNIT SCREW 1
7BRACKET WALL SCREW 1
X 2

INFILL STEP
YOU WILL NEED TO RETRIEVE THE INFILL
AND 3 X 30mm SCREW FROM PART 2,
USING YOUR SCREWS PROVIDED,
ATTACH THE INFILL TO THE UNDER-SIDE
OF THE FRONT MIDDLE FIXED SHELF.
E
RETREIVE FROM PART 2 OF 2
RETREIVE FROM PART 2 OF 2
FIXED SHELF
INFILL
MAXI 16J3

PROCEED TO PART 2
FOR INSTRUCTIONS ON HOW TO
ASSEMBLE YOUR DRAWERS
PROCEED TO UN-FOLD YOUR BACK BOARD AND PROCEED TO
NAIL IT INTO POSITION MAKING SURE YOU ARE SQUARE
AND ON THE EDGE AT ALL TIMES.
STAND YOUR UNIT UP AND PROCEED TO INSERT YOUR ADJUSTABLE
SHELVING.
PUSH THE 4 SHELF PINS (3) INTO THE HOLES PROVIDED ON EITHER
SIDE FOR YOUR SHELF TO SIT ON, THE BEST WAY TO DO THIS IS TO
COUNT YOUR HOLES UP FROM THE FIXED SHELF SO YOUR SHELVES
WILL BE LEVEL. YOU MAY CHOOSE WHERE YOU WOULD LIKE THESE
TO SIT.