Multistore MAXI ULTRA-515 User manual

ASSEMBLY INSTRUCTION FOR MAXI ULTRA-515
When aaching unit to wall put safety bracket in middle of
unit with 16mm pan head screw then 25mm pan head screw
into wall. For plasterboard without a stud it is recommended
to use a plug with screw (not provided).
TOP of UNIT
NO MODEL DESCRIPTION QTY
1CONFIRMAT SCREWS 50mm x 5mm 20
2CAPS 20
3BACKING NAILS 75
516mm PAN HEAD SCREWS 1
625mm PAN HEAD SCREWS 1
7“L” SAFETY BRACKET 1
NO MODEL DESCRIPTION QTY
2 x L & R GABLES
1 x BACKING BOARD FOLD LINE
3 x FIXED SHELF
1 x ADJUSTABLE SHELF
1 x BOTTOM KICK
AF
B
C ,D & E
H
4SUPPORT PINS 4
G

NEXT STEP:
GRAB THE SHELF PINS AND PUSH
THEM INTO THE HOLES PROVIDED
THESE WILL SUPPORT YOUR
ADJUSTABLE SHELF YOU MAY
POSITION WHERE-EVER NECESSARY.
TAKE YOUR GABLES AND LAY THEM OUT FLAT, YOU SHOULD HAVE 1 X LEFT-HAND, 1 X RIGHT-HAND GABLES.
ALIGN YOUR SHELVES AND KICK TO THE LEFT-HAND
GABLE, SCREW THEM INTO PLACE ATTACH YOU
RIGHT-HAND GABLE AND DO THE SAME.
KICK
FIXED SHELF
FOLD OUT YOUR BACK AND PROCEED TO NAIL THEM INTO
POSITION MAKING SURE YOU ARE SQUARE AT ALL TIMES.