MUND CLIMA MUP-09-WF User manual

OWNER'S MANUAL
Fan Coil Unit
Wall Mounted Type
Thank you for choosing our air conditioners.P lease read this owner's
manual carefully before operation and keep it for future reference.

MUP-09-WF MUP-12-WF MUP-18-WF

is necessary.
Thank you for choosing air conditioners, please read this owner's manual
carefully before operation and keep it for fucture reference .
The products in this manual may be different from the real one, according to different
models, some models have displayer and some models without displayer, the position
and shape of the displayer please refer to the real one.
This appliance is not intended for use by persons (including children) with restricted
physical, sensory or mental capabilities or lack of experience and knowledge,
unless they have been given supervision or instruction concerning use of the appliance
by a person reponsible for theirsafety.
Children should be supervised to ensure that they do not play with the appliance.
“OUR”
CONTENTS
O
p
eration and maintenance
■Notices for operation···············································································1
■Notices for use························································································3
■Specifications··························································································4
■Name and function of each part······························································5
■Operation of wireless remote control·······················································6
■Wired controller operation········ ····························································11
■Emergency operation············································································18
■Clean and care······················································································19
■Troubleshooting·····················································································21
Installation service
■Notices for installation···········································································24
■Installation dimension diagram·····························································26
■Install the unit························································································27
■Extemal water pipe connection sketch··················································29
■Check after installation and test operation············································30
■Installation and maintenance of Healthy Filter·······································31
This symbol stands for items
should be forbidden
This symbol stands for the
items should be followed
Do not dispose this product as unsorted municipal waste.
Collection of such waste se
p
aratel
y
for s
p
ecial treatment

ƾ
ƾ
Notices for operation

ƾƾBe sure to pull out the power
ƾ
ƾ
Earth: The ground
be connected!
If not, please ask the qualified person-
nel to install. Furthermore, don't conn-
ect each wire to the gas pipe, water
pipe, drainage pipe or any other impr-
oper places.
plug when not using the air co-
nditioner for a long time.
Otherwise, the accumulated dust
may cause fire or electric shock.
Select the most appropriate tem-
perature.
Keep room cool-
er than outside
about 5 degree.
It can preclude the electricity wasted.
Don't leave windows and
doors open for a long time
while operating the air conditioner.
It can decrease the air conditioning
capacity.
Don't block the air intake or outlet
vents of both the units.
.
It can decrease the air conditioning
capacity or cause a malfunction.
Keep combustible spray away
from the units more than 1m.
It can cause a fire or explosion.
-1-


ƾ
ƾ
ƾ
ƾ
ƾ
ƾ
ƾ
ƾ
.OTICESFOROPERATION
If the supply cord is damaged, it must be replaced
by the manufacturer or its serviceagent or a
similarly qualified person in order to avoid a
hazard.
The airflow direction can be adjusted appro-
priately. At operating, adjust the vertical airflow
direction by adjusting the louvers of upward/do-
wnward direction. And then, hold two ends of
left and right louver to adjust the horizontal air-
flow.
Louver of left/right direction Louver of upward/
downward direction.
Don't insert your hands or stick into the air
intake or outlet vents.
Otherwise it will cause accident.
Don't blow the wind to animals and plants
directly. It can cause a bad influence to them.
Don't apply the cold wind to the body for a
long time.
It can cause the health problems.
Don't use the air conditioner for other purposes,
such as drying clothes, preserving foods, etc.
Splashing water on the air conditioner can
cause an electric shock and malfunction.
Don't place a space heater near the air
conditioner.
Or CO toxicosis may occur for imcomplete
burning.
-2-

Principle:
The unit absorbs energy from the air indoors and takes the energy away
through circulation of cooling water, so as to reduce indoor ambient
temperature. Accordingly, the cooler the water, the larger the cooling
capacity.
◆Notices for use
Working principle for heating
Working principle for cooling
Principle:
A
ir circulation, which is forced by the fan, transfers the energy from hot
water to the air indoors so as to increase indoor ambient temperature.
A
ccordingly, the hotter the water, the larger the heating capacity.
Because heating capacity of such air circulation system is closely
related to the temperature of hot water, if water temperature is not high
enough, additional heating appliance is recommended to use together.
A
nti-cool-wind function
In order to ensure comfort of the users, under circumstances such as
the heat mode just starts or the unit runs heat mode under low water
temperature, the fan will stop running to prevent the chilled wind blowing
out.
A
nti-heat-wind function
In order to ensure comfort of the users, under circumstances such as the
cool mode just starts or the unit runs cool mode under hot water tempe-
rature, the fan will stop running to prevent the hot wind blowing out.
-3-
-3-

Specification
-4-
≤1.5MPa ≤1.5MPa
220 V-2240V 50 Hz
MUP-09-WF MUP-12-WF MUP-18-WF

Name and function of each part
Ņ

Ń
˄˅
Ł
ł
ņ
Ņ
ł
ň

ń
Ň
Ń
Ł
The unit
Air in
Air out
Wireless
remote control
Power cable
Remote control
Front panel
Filter
Guide louver
Wall pipe
Bind tape
Drain pipe
ńņ
Ň
˖Cool
˖Dry
˖Fan
˖Heat
˖Set temp.
˖Run
The pattern in displayer˖

-5-

ƽPress this button to select LIGHT On/Off
in the displayer. When the LIGHT On is
LIGHT button
LIGHT
set,the mark will be displayed and the
indicator light in the displayer will be on.
When the LIGHT Off is set, the mark will
disappear and the indicator light will be
off.
Functions of wireless remote control
ƽ
ON/OFF button
ON/OFF
Remote control
Signal transmitter
AUTO
COOL
DRY
FAN
HEAT
not drop or throw the remote control; Don't let any liquid drop into the remote control
Note: Be sure that there are no obstructions between receiver and remote control; Do
Medium
or leave the remote control under the sunlight or place where is very hot.
ƽPress this button, Auto, Cool,Dry, Fan,
Heat mode can be selected circularly.
MODE button
MODE
Under Cool mode, the initial value is 24°C
(75°F) . Under Heat mode, the initial value
is 24°C(75°F).
Auto mode is not available in this model.
ƽPress this button to select Sleep On/Sleep
Off. If power is on, Sleep Off is default.
SLEEP button
SLEEP
If the unit is turned off, the Sleep function
setting will be not retained in memory. If
Sleep function is on, the mark of Sleep
will display. In this mode, the time of timer
can be adjusted. Under Fan and Auto
modes, this function is not available.
ƽPress this button, Auto, Low, Medium, High
speed can be circularly selected. After
FAN button
FAN
powered on, Auto fan speed is default.
Under Dehumidify mode, Low fan speed
is default.
Low
High
ƽPress Clock button to set the time of clock.
When blinks and displays, you can
CLOCK button
CLOCK
set the time by pressing + or - button.
If no button is pressed within 10 seconds
the remote will revert back to the normal
display. Press again to accept the setting.
If it is set the first time, 12:00 is the initial value.
Note: If mark displays on the LCD, it means
it is the time of clock, if not, it is the time
of timer.
/PERATIONOFWIRELESSREMOTECONTROL



-6-
●Press ON/OFF button to turn on/off the unit.
When the unit is turned off, the Timer, Sleep
function will not be retained in memory, but
the the time will be retained and is still
displaying.
Note: Under the Dry mode, the fan speed
is not operational, and low fan speed is
default.

Remote control
●
BLOW button
BLOW
●
TURBO button
TURBO
●
+ button
+
●Presetting temperature can be decreased.
Press this button, the temperature can be
- button
-
set up, continuously press this button
and hold for two seconds, the relative
contents can quickly change, until unhold
this button and send the order that the ć
(oF) signal will be displayed all the time.
The temperature adjustment is unav-
ailable under the Auto mode, but the order
can be sent by if pressing this button.
Functions of wireless remote control
Operation of wireless remote control
Press this button to turn on/off the Blow function.
This function is not available for this model.
this button,"BLOW" will be concealed, at
this time the Blow function is turned off.
After powered on, Blow OFF is defaulted.
When operating the ON/OFF button, or
switching mode to Cool or Dehumidifying
mode,the Blow function will keep the original
status. If unit is turned off, Blow OFF only
can be set up and send the signal.
press this button and will display "BLOW",
at this time the Blow is turned on. If repress
In Cool or Heat mode, press this button to
turn on/off the Turbo function.
Note: This function is not available for this
model.
For presetting temperature increasing.
Press this button,can set up the temperature,
when unit is on . Continuously press and
hold this button for more than 2 seconds,
the corresponding contents will be
changed
rapidly, until unpress the button
ć˄˅
laying all along. Centigrade setting range
16-30; Fahrenheit scale setting range:
61-86.
then send the information, is disp-
conditioners. For some models without the functions specified here, we preserve the right
to not to inform exclusively.
Notice: This is a general remote control, it could be used for multiple types (functions) of air
TEMP button
TEMP
ƽPress this button to select the display of
either indoor setting temperature or in-
door ambient temperature.When the indoor
unit powered on firstly, setting temperature
display is default. Change status to to dis-
play the ambient temperatuere. If received
control signal in 5 seconds, the display temp.
will revert back to setting temperature. When
unit is off, indoor setting temperature display
is default.
Note: This function is only available for
certain models.
ƽAfter powered on, the setting temperature
displaying is defaulted, (according to
customers requirements to display, if
there is no requirement that will default
to display the presetting temperature
and there is no icon displayed on wireless
remote control). Press this button,
(When displaying ) , will display
presetting temperature; (when displaying )
will display indoor ambient temperature,
current displaying status will not be
changed. If current displays indoor
ambient temperature, if received the other
remote control signal, it will display
presetting temperature, 5s later, will back
to display the ambient temperature.
(This function is applicable to partial of models)
(This function is applicable to partial of models)

-7-
Press this button to decrease the temper-
ature by 1 degree Celsius once. Press and
hold for more than two seconds so that we
can change the temperature continuously.
The minimum and maximum setting range
of the temperature is 16 to 30 degree
Celsius.
Press this button to increase the temper-
ature by 1 degree Celsius once. Press and
hold for more than two seconds so that we
can change the temperature continuously.
The minimum and maximum setting range
of the temperature is 16 to 30 degree
Celsius.

/&&
This is a general use remote control. If
remote control shows the following three
kinds of status that the swing status of main
unit will be:
When the guide louver start to swing up and
down, if turn off the Swing, the air guide louver
will stop at current position.
which indicates the guide louver swings up
and down between the five positions.
ƽPress this button to adjust swing angle,
which circularly changes as below:
SWING UP AND DOWN BUTTON
TIMER ON TIMER ON BUTTON
Timer On setting: Signal “ON” will blink
and display, signal will conceal, the
numerical section will become the timer
on setting status. During 5 seconds blink,
by pressing ˇor ˉbutton to adjust the
time value of numerical section, every
press of that button, the value will be
increased or decreased 1 minute. Hold
pressing ˇor ˉbutton, 2 seconds later,
it quickly change, the way of change is:
During the initial 2.5 seconds, ten numbers
change in the one place of minute, then
the one place is constant, ten numbers
change in the tens place of minute at 2.5
seconds speed and carry. During 5s blink,
press the Timer button, the timer setting
succeeds. The Timer On has been set up,
repress the timer On button, the Timer
On will be canceled. Before setting the
Timer, please adjust the Clock to the
current actual time.
TIMER OFF BUTTON
Once press this key to enter into
TIMER OFF setup, in which case
the TIMER OFF icon will blink.
The method of setting is the same
TIMER OFF
as for TIMER ON.
ƽ
Remote control
Cunctions of wireless remote control
/PERATIONOFWIRELESSREMOTECONTROL
of air condictioners. For some models without the funcions specified here, we prese-
rve the right to not to inform exclusively.
Notice: This is a general remote control, it could be used for multiple types (functions)
ƽ

-8-
Press the TIMER ON button to
set the timed On. Press +/-
once to increase or decrease
the minute by 1 minute. If pre
-ssed and held for 2 seconds,
the minute will increase or
decrease constantly by 1 min-
ute. If held constantly for more
than 5 seconds, the minute will
begin to change in every 10
minutes. Press TIMER ON
again to accept the setting and
ON will show besides the time
of clock meaning the setting
succeeds. Press the TIMER ON
again to cancel the setting.
Press the TIMER OFF button
to set the timed Off. The
procedures are similar as
above.

1
3
4
2
5
4
1
2
3
1. After powered on, press ON/OFF button,
the unit will start to run. (Note: When it is
powered off, the guide louver of main unit
will close automatically.)
2. Press MODE button, select desired
running mode, or press COOL or HEAT
mode to enter the corresponding operation
directly.
3. Press + or - button to set the desired
temperature.
4. Press FAN button to set fan speed from
A
UTO, FAN, LOW, MID and HIGH.
5. Press button to select SWING mode.
◆
Operation of wireless remote control
Guide for operation — General operation
Guide for operation — Optional operation
1. Press SLEEP button to set the sleep state.
2. Press TIMER ON and TIMER OFF button
to schedule the unit ON/OFF.
3. Press LIGHT button to control the on and
off of the indicator board. (This function may
be not available for some units).
-9-
-9-

Press +and - buttons simultaneously to lock or unlock the wireless remote control. If it is
locked, the mark
times but the air condictioner has no respondence. If unlocked, the mark will disappear.
1. Press swing up and down button continuously more than 2s,the main unit will swing back
and forth from up to down, and then loosen the button, the unit will stop swinging and present
position of guide louver will be kept immediately.
2. Under swing up and down mode, when the status is switched from off to , if press this
button again 2s later, status will switch to off status directly; if press this button again
within 2s,the change of swing status will also depend on the circulation sequence stated above.
Pwitch between Fahrenheit and Centigrade
When unit is off, press MODE and - buttons simultaneously to switc between ćand
ƾ
ƾ
ƾ
ƾ
will display; when pressing any button, the mark will blink for three
Operation of wireless remote control

Changing batteries and notices




ƾ
ƽ
ƽ
ƽ
ƽ
ƽ
Slightly to press the place with , along the arrowhead direction to push the back cover of wireless
remote control. (As show in figure)
Take out the old batteries. (As show in figure)
Insert two new AAA1.5V dry batteries, and pay attention to the polarity.
(As show in figure)
Attach the back cover of wireless remote control. (As show in figure)
When changing the batteries, do not use the old or different batteries,
If the wireless remote control will not be used for a long time, please
otherwise, it can cause the malfunction of the wireless remote control.
take them out, and don't let the leakage liquid damage the wireless
remote control.
The operation should be in its receiving range.
It should be placed at where is 1m away from the TV set or stereo sound sets.
If the wireless remote control can not operate normally, please take them out,
after 30s later and reinsert, if they cannot normally run, please change them.
Sketch map for
changing batteries
NOTE: Fig.1
Fig.2
-10-
Switch between Fahrenheit and Centigrade.
When unit is under Off state, press MODE and - button simultaneously to switch
between ℃and℉.

(optional)
-11-
TIMER

-12-

-13-
TIMER

-14-
TIMER
TIMER

-15-
TIMER
TIMER
TIMER
parameters display
interface.

-16-
TIMER
TIMER

-17-