Mychanic SK3 User manual

Operating Instructions for Model 53072,53182
SIDEKICK STOOL - SK3
SPECIFICATIONS
• OverallDimensions:23”Wx18.63”Dx17.4”H(58.4cmx47.3cmx44.2cm)
• Weight:26.4lbs(12 kg)
• MaximumWeightCapacityforDrawer:20lbs.(9.1kg)
• MaximumWeightCapacityforEachSideTray:11lbs.(5kg)
• MaximumWeightCapacityforUnit(includingtools):500lbs.(227kg)
IMPORTANT SAFETY INFORMATION
CAUTION: Failuretoreadandfollowallwarningsbelowcouldresultinpropertydamageorpersonalinjury.Alwaysusecarewhen
workingwithtools.
ASSEMBLY PRECAUTIONS
•Assembleonlyaccordingtotheseinstructions.Improperassemblycancreatehazards.
• Keepchildren,pets,andbystandersoutoftheareaduringassembly.Distractionscancauseyoutolosecontroloftools,
injuringyourselforothers.
• Weightcapacityandotherproductcapabilitiesapplytoproperlyandcompletelyassembledproductonly.Donotuseif
incompletelyorimproperlyassembled.
USE PRECAUTIONS
•Thisproductisnotatoy.Donotallowchildrentoplaywithornearthisitemandstoreoutofreachofchildren.
• Usethestoolandaccessoriesasintendedandinaccordancewiththeseinstructions,takingintoaccounttheworking
conditionsandtheworktobeperformed.Useofthestoolforoperationsdierentfromthoseintendedcouldresultinahazardous
situation.
• Inspectbeforeeveryuse;donotuseifpartsarelooseordamaged.
• Donotexceedweightcapacityof500lbs.(227kg).
• NOTE:Beawareofdynamicloading!Suddenshiftsintheloadmaybrieycreateexcessload,whichmayresultinproduct
failure.
• Storeidleequipment.Whennotinuse,thisproductmustbestoredinadrylocationtoinhibitrust.
• Thewarnings,cautions,andinstructionsdiscussedinthisinstructionmanualcannotcoverallpossibleconditionsand
situationsthatmayoccur.Itmustbeunderstoodbytheoperatorthatcommonsenseandcautionarefactorswhichcannotbe
builtintothisproductbutmustbesuppliedbytheoperator.
MAINTENANCE
• Whenservicing,useonlyidenticalreplacementparts.
• Toclean,wipedownwithdryorslightlydampcloth.Donotusesolvents,asthiscandamagetheupholstery.Besuretowipeooil
andotheruidswhennishedusing.
WARRANTY - UNITED STATES ONLY
Read and understand this entire manual before assembling, installing,
operating, or servicing this product.Failuretofollowallwarningsand
instructionsmayresultinpropertydamageand/orseriousinjury.
TWOYEARLIMITEDWARRANTY
Thisproductiswarrantedtobefreeofdefectsinmaterialsandworkmanshipfortwoyearsfromthedateofpurchasefortheoriginalpurchaser.
Proofofpurchasedatewillberequired.Themanufacturerisnotresponsibleforanyconsequentialorincidentaldamagesarisingfromthebreach
ofthisoranyotherwarranty,whetherexpress,impliedorstatutory.Somestatesdonotallowtheexpulsionorlimitationofconsequentialor
incidentaldamages,sotheaboveexclusionmaynotapplytoyou.Thiswarrantygivesyouspeciclegalrights,andyoumayalsohaveother
rightswhichvaryfromstatetostate.
Anyattempttoself-repairwillvoidthelimitedwarranty.ValidonlyintheUSA.
WARNING: Do not stand on Stool Pad (1) or Plastic Trays (3). Serious injury can occur.

KEY PART DESCRIPTION QTY
A Seat 1
B MetalDrawerAssembly 1
C ToolCaddy 1
D DrillHolster 1
E SideStorageTray 2
F 3”PremiumCasters 4
G Bolt 4
H LockNut 8
I MetalWasher 12
J PhillipsHeadMachineScrews 9
DISTRIBUTED BY
DELK,Inc.
Nashville,TN37209
MYCHANIC.com
©2020DELK,Inc.AllRightsReserved.TheDELK®,MYCHANIC®,TURNYOUROWNWRENCH,andMYCHANICLogo®Trademarks
arepropertyofDELK,Inc.
PARTS LIST AND ASSEMBLY INSTRUCTIONS
A
D
J
B
J
C
F
I
H
E
I
H
G
Note: Some parts are listed and shown for illustration purposes only and are not available individually as replacement parts.
STEP1 Installthe4casterstotherollingseatframe.Ensurethatthecastersaretightened
downwithawasherandlocknut.Checknuttightnessperiodicallytoensurethe
safetyoftheuser.
STEP2 AttachtheSideFrameTraystothemiddleoftheBodyFrameusingPhilipshead
machinescrews.Thereare2pre-drilledandthreadedpilotholeswheretheSide
FrameTrayswillfastenoneachsideoftherollingseatframe.Note:thesideframe
traysareeasiertoinstallwiththeseatremovedfromtheframe.
STEP3 AttachtheDrillHolstertothebacksideoftheSidekick.Thereare5threadedinserts
thatwillalignwithholesontheholster.Fastentheholstertothebacksideusing5
Philipsheadmachinebolts.
STEP4 Determinethedesiredheightoftheseat.Theseatheightcanbeadjustedbylifting
theseatupandinsertingmachineboltsthroughthemetalframeoftherollingseat
thatalignwiththeholesintheseatarms.Useawasherandlockingnutonthe 
backsideofthebolttoensuretheboltisheldintoplaceduringuse.
A072919