National Public Seating COLLABORATOR TABLE WITH CROSSBEAM User manual

INCLUDED HARDWARE
TOOLS FOR ASSEMBLY
Drill Allen Wrench
36x Screws 4x Bolt
Congratulations, your table is now assembled and ready to be used!
ASSEMBLY INSTRUCTIONS
COLLABORATOR TABLE WITH CROSSBEAM
TABLE COMPONENTS
1Fasten each end of the
crossbeam to each leg by
installing 2 included bolts
through the holes at the
center each leg and into the
ends of the crossbeam.
Dear Customer,Thank you for your purchase. Although extreme care goes into manufacturing &
packaging of this product, mistakes are possible. If you encounter any missing parts or diculty in
assembly, please contact our customer service Toll Free at 1-800-261-4112 or
[e-mail] for courteous & immediate resolution to your problem.
2Align the leg top plates with
the pre-marked holes on the
tabletop and fasten legs to
tabletop by installing 9
screws through each top
plate into the tabletop.
Crossbeam
Tabletop
2x Legs

INCLUDED HARDWARE
TOOLS FOR ASSEMBLY
Drill
36x Screws
Congratulations, your table is now assembled and ready to be used!
TABLE COMPONENTS
1
Dear Customer,Thank you for your purchase. Although extreme care goes into manufacturing &
packaging of this product, mistakes are possible. If you encounter any missing parts or diculty in
assembly, please contact our customer service Toll Free at 1-800-261-4112 or
[e-mail] for courteous & immediate resolution to your problem.
* See other side for Collaborator table with crossbeam assembly.
Align the leg top plates with the pre-marked holes on the tabletop and
fasten legs to tabletop by installing 9 screws through each top plate
into the tabletop.
Tabletop
2x Legs
ASSEMBLY INSTRUCTIONS
COLLABORATOR TABLE*