Nauticam N85 User manual

Please follow the instructions below to mount the adaptor on a port.
1.
For Zeiss 12mm lens:
Install the camera body
only into the housing and attach the optical fiber
cables to the housing.
For Sony 10 18mm lens: Attach the optical fiber
cables to the housing and then mount the N85
to N120 port adaptor to the housing.
*Please refer to the housing manual for installing
camera and mounting port to the housing.
2.
For Zeiss 12mm lens:
Mount the N85 to N120 port
adaptor to the housing, then mount the lens on
the camera.
For Sony 10 18mm lens: Mount the lens (with gear
attached) on the camera, then install the camera
into the housing.
*Please refer to the housing manual for installing
camera and mounting port to the housing.
3.
Lift the Port lock/ release latch
on the other side
of the adaptor.
1

4.
Press and hold the port release safet
y button,
turn the port lock/release latch clockwise until
it stops.
5.
Align the "I" mark on the adaptor with the
WHITE dot on the port. Gently push the port
towards the adaptor until it cannot go in any
further.
6.
Turn the
port
anti
clock
wise until the white dot
on the adaptor aligns with the white dot on the
port.
Press
2

7.
To lock the port in place, turn the port
lock/release latch anti clockwise to the original
position and then flip it down.
8. To unlock, reverse the above procedures.
3